Body & Frame

-€38.56
Out of Stock

DRAG SPECIALTIES Mustang Gas Tank — 12.5 L (3.3 US gal.), 50 cm L, 3/8" NPT

Fat Bob-style low-tunnel gas tank for carbureted applications. ~3.3 US gal (12.5 L), single-cap, 3/8" NPT petcock mount. Ships unpainted. Not for fuel-injected models.

€108.98 €147.54

-€14.40
Out of Stock

DRAG SPECIALTIES [object Object]

Kickstand Wedge Kit by Don Hotop. Adjusts kickstand angle at the frame for bikes lowered up to 2". Maintains foot board angle. 6061 billet aluminum construction. Includes fine- and coarse-thread bolts and installation instructions.

€40.72 €55.12

One-Piece Extended Gas Tank — 5.1 US gal (19.3 L), 2" extended, Raw

-€102.77
Out of Stock

DRAG SPECIALTIES One-Piece Extended Gas Tank — 5.1 US gal (19.3 L), 2"...

One-piece extended gas tank with a 5.1-gallon capacity and 2" extended length. Ships unpainted; caps not included. Seat nose may require modification.

€290.42 €393.19

-€73.14
Out of Stock

COBRA [object Object]

Chrome-plated bolt-on bumper with laser-cut brackets for a precise, OEM-style fit on Freewheeler trikes.

€284.42 €357.56

-€44.36
Out of Stock

DRAG SPECIALTIES Fat Bob Rear Fender — 30-1/2" contour, 7-1/4" width, Unfinished

Raw steel rear fender; available pre-drilled for OEM struts or undrilled for custom installs; includes taillight/license mount.

€125.35 €169.71

Custom Oil Tank — 3.3 qt, center fill, chrome

-€107.69
Out of Stock

DRAG SPECIALTIES Custom Oil Tank — 3.3 qt, center fill, chrome

Polished domed oil tank with mounting tabs and built-in battery box. Approximately 3.3 quart capacity. 1/8" NPT line fittings; 1/4" NPT drain. Sold each.

€304.33 €412.02

-€38.02
Out of Stock

DRAG SPECIALTIES Steel Front Fender — 16.00" wheel, front, unfinished

Smooth-sided steel front fender with no rivets; fits FLSTF front ends with 16" wheels. Sold each.

€107.44 €145.46

Gas Tank with Chrome Aero-Style Gas Cap — 12.5 L (3.3 US gal.), 22 mm outlet

-€67.73
Out of Stock

DRAG SPECIALTIES Gas Tank with Chrome Aero-Style Gas Cap — 12.5 L (3.3 US...

Low-profile tank with locking cap; ships unpainted and must be fitted, pressure tested and sealed before painting.

€191.41 €259.14

-€40.90
Out of Stock

DRAG SPECIALTIES Oil Tank — 3.0 qt, Chrome

Includes filler cap; approximately 3.0 qt capacity. Compact design for easy installation.

€115.59 €156.49

-€20.24
Out of Stock

DRAG SPECIALTIES [object Object]

High-strength steel kickstand that replaces OEM units; under-stock length fits lowered suspension. Measured from the first bend top to bottom for Big Twin, Softail, FLT and XL.

€57.20 €77.44

-€25.62
Out of Stock

MUSTANG Tank Bib with Pouch — Black, Silver

Protects tank paint with felt backing, uses stock mounts for quick installation, soft fabric-lined pouch, contoured fit. Made in the USA.

€87.14 €112.76

-€1.85
Out of Stock

DRAG SPECIALTIES [object Object]

Durable kickstand spring measured from hook to hook for correct fit. Easy to install.

€5.23 €7.08

-€12.02
Out of Stock

DRAG SPECIALTIES Custom Oil Dipstick — Swivel, Chrome

Exact OEM fit; polished cap with peaked design; includes a pivoting stick for easy access.

€33.98 €46.00

-€1.87
Out of Stock

DRAG SPECIALTIES Fuel Pump Door Seal — Brown, Rubber

Replacement component that meets or exceeds OEM specification. Replacement screws sold separately; top plate screws are single‑use.

€5.31 €7.18

-€5.38
Out of Stock

DRAG SPECIALTIES [object Object]

Low-profile kickstand extension that eases operation; includes mounting hardware. Drilling required.

€15.22 €20.60

-€125.78
Out of Stock

KLOCK WERKS WFB™ Benchmark Rear Fender — 7-1/8" wide, E-coated

Stamped 14-gauge construction with deep-draw forming for a flawless fit; direct replacement; mounting hardware included.

€489.11 €614.89

-€10.60
Out of Stock

DRAG SPECIALTIES Custom Oil Dipstick — Chrome, Swivel

Plated peaked cap with exact OEM-fit measuring assembly; includes a pivoting rod for easy oil-level checks.

€29.97 €40.57

-€1.25
Out of Stock

DRAG SPECIALTIES [object Object]

Durable kickstand spring measured from hook to hook for accurate fit. Easy to install.

€3.55 €4.80

WFB™ Benchmark Front Fender — 6-1/2" width, 21" wheel, Black, E-Coating

-€75.46
Out of Stock

KLOCK WERKS WFB™ Benchmark Front Fender — 6-1/2" width, 21" wheel, Black,...

Stamped 14-gauge U.S. steel front fender with E-coating, pre-drilled fitment, rivetless sides and extended rear tail; pairs with WFB™ rear fender.

€293.45 €368.91

-€5.38
Out of Stock

DRAG SPECIALTIES [object Object]

Increases kickstand contact area for easier operation; includes mounting hardware. Drilling required.

€15.22 €20.60

WFB™ Benchmark Front Fender — 6-1/2" fender, fits 16"/17"/18"/19" wheels, black

-€75.46
Out of Stock

KLOCK WERKS WFB™ Benchmark Front Fender — 6-1/2" fender, fits...

Stamped 14-gauge U.S. steel, E-coated to resist rust; pre-drilled, rivetless smooth sides, extended 1.5" rear tail. Pairs with WFB™ rear fender. Made in the USA.

€293.45 €368.91

-€19.73
Out of Stock

DRAG SPECIALTIES [object Object]

High-strength steel kickstand — direct OEM replacement. Under-stock length for lowered suspension. Measured from first bend to first bend on Big Twin, Softail, FLT and XL.

€55.77 €75.50

-€11.82
Out of Stock

DRAG SPECIALTIES Custom Oil Dipstick — Swivel, chrome

Precision replacement dipstick with a plated cap and pivoting stem for easy oil-level checks.

€33.41 €45.23

-€5.22
Out of Stock

DRAG SPECIALTIES Fuel Pump Door Seal — Gray

Restores a watertight seal at the fuel pump access cover to help prevent leaks and contamination.

€14.76 €19.98

-€11.84
Out of Stock

DRAG SPECIALTIES Custom Oil Dipstick — Chrome, Swivel

Chrome-plated oil dipstick with peaked design cap; exact OEM replacement, includes swiveling dipstick.

€33.47 €45.31

-€17.29
Out of Stock

DRAG SPECIALTIES [object Object]

High-strength steel kickstand that replaces OEM units, with under-stock length options for lowered suspension. Measure Big Twin, Softail, FLT and XL from bend to bend.

€48.89 €66.18

-€53.21
Out of Stock

DRAG SPECIALTIES Oil Tank — 3.0 qt, Black Gloss

Replacement oil tank with threaded filler cap for straightforward service and secure mounting.

€150.38 €203.59

Hugger Series Front Fender — 21" wheel, 5-15/16" outside mounting width

-€75.46
Out of Stock

KLOCK WERKS Hugger Series Front Fender — 21" wheel, 5-15/16" outside...

Steel front fender adds rigidity, comes stamped and pre-drilled for a consistent finish, resists corrosion; mounting blocks sold separately.

€293.45 €368.91

-€70.64
Out of Stock

DRAG SPECIALTIES Oil Tank — Side-fill, 3 qt, Black

OEM-style side-fill design for a clean, factory look. Durable construction and straightforward installation.

€199.60 €270.24

Hugger Series Front Fender — 21", 45" contour, 5-7/8" width, E-Coating

-€75.46
Out of Stock

KLOCK WERKS Hugger Series Front Fender — 21", 45" contour, 5-7/8" width,...

Adds front-end rigidity and Kustom styling. Stamped, pre-drilled for consistent fit and minimal body work. Protective coating resists corrosion. Made in the USA. Requires Klock Werks Tire Hugger mounting blocks (sold separately).

€293.45 €368.91

shop by category

Body & Frame

Body & Frame

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Contact us

Products

Our company

shop by category

Body & Frame  

Body & Frame

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Body & Frame