Body & Frame

Kickstand Wedge Kit — Shortens 50.8 mm (2"), Silver

-€14.40

DRAG SPECIALTIES Kickstand Wedge Kit — Shortens 50.8 mm (2"), Silver

Change the kickstand angle at the frame for lowered bikes without heating or bending the chrome kickstand. Includes fine and coarse bolts and installation instructions.

€40.72 €55.12

-€15.62

DRAG SPECIALTIES Swingarm Pivot Shaft Kit — Rear, Chrome

Complete swingarm pivot shaft kit with shaft, bushings, spacers, nut and washer for straightforward replacement.

€44.15 €59.77

Gas Cap with Paint Protectors — Left-hand thread, screw on, non-vented, Chrome

-€19.05

DRAG SPECIALTIES Gas Cap with Paint Protectors — Left-hand thread, screw on,...

Low-profile gas cap with screw-in paint protectors and included installation tool. Ratchet-action cap for secure closure.

€53.84 €72.89

One-Piece Extended Gas Tank — 5.1 US gal (19.3 L), 2" extended, Raw

-€102.77

DRAG SPECIALTIES One-Piece Extended Gas Tank — 5.1 US gal (19.3 L), 2"...

One-piece extended gas tank with a 5.1-gallon capacity and 2" extended length. Ships unpainted; caps not included. Seat nose may require modification.

€290.42 €393.19

-€54.29
Out of Stock

DRAG SPECIALTIES Stainless Steel Braided Oil Line Kit — 6-Line Kit, Chrome

Direct replacements for OEM oil lines. Compression and NPT fittings are chrome-plated. Made in the USA.

€153.41 €207.70

-€12.35

DRAG SPECIALTIES Gas Cap with Paint Protectors — Chrome, Dummy

Replaces OEM fuel gauge in tanks with the fuel gauge on the left side; protects paint around the filler and provides a clean, factory appearance.

€34.91 €47.26

Fat Bob Rear Fender — 18.5 cm (7-1/4") width, 77.5 cm (30-1/2") contour

-€44.36

DRAG SPECIALTIES Fat Bob Rear Fender — 18.5 cm (7-1/4") width, 77.5 cm...

Raw steel rear fender for Fat Bob — available pre-drilled or undrilled, includes taillight/license mount.

€125.35 €169.71

-€38.40
Out of Stock

DRAG SPECIALTIES Stainless Steel Braided Oil Line Kit — 4-line kit, chrome

Direct OEM replacement oil lines with chrome-plated compression and NPT fittings. Made in the USA.

€108.55 €146.95

Custom Oil Tank — 3.3 qt, center fill, chrome

-€107.69

DRAG SPECIALTIES Custom Oil Tank — 3.3 qt, center fill, chrome

Polished domed oil tank with mounting tabs and built-in battery box. Approximately 3.3 quart capacity. 1/8" NPT line fittings; 1/4" NPT drain. Sold each.

€304.33 €412.02

$Steel Front Fender — 16.00\" wheel, 34-1/2\" contour$

-€38.02

DRAG SPECIALTIES Steel Front Fender — 16.00\" wheel, 34-1/2\" contour

Smooth-sided, no-rivet front fender designed for FLSTF front ends with 16" wheels.

€107.44 €145.46

-€48.10
Out of Stock

DRAG SPECIALTIES Stainless Steel Braided Oil Line Kit — 4-line kit, Chrome

Direct replacements for OEM oil lines. Compression and NPT fittings are chrome-plated. Made in the USA.

€135.94 €184.04

Gas Tank with Chrome Aero-Style Gas Cap — 12.5 L (3.3 US gal.), 22 mm outlet

-€67.73

DRAG SPECIALTIES Gas Tank with Chrome Aero-Style Gas Cap — 12.5 L (3.3 US...

Low-profile tank with locking cap; ships unpainted and must be fitted, pressure tested and sealed before painting.

€191.41 €259.14

-€48.10
Out of Stock

DRAG SPECIALTIES Stainless Steel Braided Oil Line Kit — 5-line kit, chrome

Direct replacements for OEM oil lines
Compression and NPT fittings are chrome-plated
Made in the USA

€135.94 €184.04

-€40.90
Out of Stock

DRAG SPECIALTIES Oil Tank — 3.0 qt capacity, chrome

Replacement oil reservoir with filler cap, designed for easy installation.

€115.59 €156.49

-€20.24

DRAG SPECIALTIES Kickstand — 222 mm (8-3/4"), Chrome

Direct OEM-style replacement that provides a secure, dependable parking stance; available in under-stock lengths for lowered bikes.

€57.20 €77.44

-€39.36
Out of Stock

DRAG SPECIALTIES Stainless Steel Braided Oil Line Kit — Chrome

Direct replacements for OEM oil lines. Compression and NPT fittings are chrome-plated. Made in the USA.

€111.26 €150.62

-€45.57
Out of Stock

DRAG SPECIALTIES Stainless Steel Braided Oil Line Kit — 4-line kit, chrome

Direct replacements for OEM oil lines; chrome-plated compression and NPT fittings; made in the USA.

€128.77 €174.34

-€7.50
Out of Stock

DRAG SPECIALTIES Fuel Cap — Chrome, Non-vented

Locking screw-in gas cap deters theft; includes swing-away cover and two keys.

€21.22 €28.72

-€1.85
Out of Stock

DRAG SPECIALTIES Kickstand Spring — 86.3 mm, Chrome

Replacement kickstand spring measured hook to hook for accurate fitment; durable, easy to install.

€5.23 €7.08

-€35.16
Out of Stock

DRAG SPECIALTIES Stainless Steel Braided Oil Line Kit — 3-Line Kit, Chrome

Direct replacements for OEM oil lines. Compression and NPT fittings are chrome-plated. Made in the USA.

€99.35 €134.51

Oil Tank Dipstick — 4.375" swiveling, 1.45" plug body, 1.75" chrome cap, fits '00-'17 Softail

-€5.00
Out of Stock

DRAG SPECIALTIES Oil Tank Dipstick — 4.375" swiveling, 1.45" plug...

4.375" swiveling dipstick with 1.45" plug body and 1.75" polished cap; fits most '00-'17 Softail style oil tanks.

€14.14 €19.14

-€35.16
Out of Stock

DRAG SPECIALTIES Stainless Steel Braided Oil Line Kit — 3-line kit, chrome

Direct replacements for OEM oil lines. Compression and NPT fittings are chrome-plated. Made in the USA.

€99.35 €134.51

-€12.02
Out of Stock

DRAG SPECIALTIES Custom Oil Dipstick — Swivel, Chrome

Exact OEM fit; polished cap with peaked design; includes a pivoting stick for easy access.

€33.98 €46.00

Mustang Gas Tank — 12.5 L (3.3 gal), 19-3/4" L × 11-1/2" W × 7-1/2" H

-€46.45

DRAG SPECIALTIES Mustang Gas Tank — 12.5 L (3.3 gal), 19-3/4" L × 11-1/2" W ×...

Fat Bob-style low-tunnel gas tank, single-cap design, ~3.3 gal capacity. Not for fuel-injected models. Ships unpainted.

€131.30 €177.75

-€5.38

DRAG SPECIALTIES Easy Find Kickstand Extension — Chrome

Adds surface area to make hard-to-reach side stands easier to operate; includes mounting hardware; drilling required.

€15.22 €20.60

-€125.78

KLOCK WERKS WFB™ Benchmark Rear Fender — 7.125" wide, rear fitment, E-Coating

Heavy-gauge stamped rear fender with extended length and included mounting hardware for direct replacement.

€489.11 €614.89

Universal Stainless Steel Braided Oil Line — 23 cm, 8.7 mm ID, 1/8" NPT, Chrome

-€8.40
Out of Stock

DRAG SPECIALTIES Universal Stainless Steel Braided Oil Line — 23 cm, 8.7 mm ID,...

Universal braided oil line with compression fittings; measured overall including fittings. Made in the USA. Sold each.

€23.75 €32.15

-€10.60
Out of Stock

DRAG SPECIALTIES Custom Oil Dipstick — Chrome, Swivel

Plated peaked cap with exact OEM-fit measuring assembly; includes a pivoting rod for easy oil-level checks.

€29.97 €40.57

-€1.25
Out of Stock

DRAG SPECIALTIES Kickstand Spring — 100.1 mm (3.94 in), Chrome

Reliable replacement kickstand spring with easy installation and consistent tension.

€3.55 €4.80

WFB™ Benchmark Front Fender — 6-1/2" width, 21" wheel

-€75.46

KLOCK WERKS WFB™ Benchmark Front Fender — 6-1/2" width, 21" wheel

Stamped 14-gauge U.S. steel front fender with rivetless sides, pre-drilled mounting, and extended rear tail. Made in USA.

€293.45 €368.91

shop by category

Body & Frame

Body & Frame

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Contact us

Products

Our company

shop by category

Body & Frame  

Body & Frame

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Body & Frame