Body & Frame

-€3.65
Out of Stock

COLONY Gas Tank Mounting Hardware Kit — cadmium plated

Complete bolt-and-nut kit to secure the gas tank. Made in the USA.

€14.17 €17.82

-€3.17

COLONY Gas Tank Mounting Hardware Kit — Zinc plated

Complete gas tank mounting bolt and nut kit; made in the USA.

€8.93 €12.10

-€2.36

COLONY Gas Tank Mounting Hardware Kit — Chrome plated

Complete bolt and nut kit for mounting gas tanks. Made in the United States.

€6.67 €9.03

-€96.07

TRASK Chin Spoiler — Unfinished

Hand-laid fiberglass chin spoiler that helps fill the gap between the wheel and the front of the frame; includes hardware and grille insert. Made in the USA.

€373.60 €469.67

-€6.56

S&S CYCLE Oil Filter Fitting — Steel, Straight fitting

Compact connector for oil filter installation; provides reliable sealing and easy maintenance.

€18.50 €25.06

Assault Armor Carbon Fiber Chin Spoiler — Front, Air Cooled, Black

-€263.40
Out of Stock

TRASK Assault Armor Carbon Fiber Chin Spoiler — Front, Air Cooled,...

Lightweight spoiler pre-fit to install; includes stainless mesh, brackets and hardware. May require oil cooler cover modification. Not for CVO models.

€1,024.35 €1,287.75

-€5.97

CIRO Fuel Line Fitting Cover — Chrome

Covers the tank-end fitting on EFI fuel lines; quick installation and removal for service, with a clean, classic look.

€23.25 €29.22

-€7.89

CIRO LED Flagpole Mount — 1/2" round, chrome

Mount for LED flagpoles. Hardware and instructions included. Low-profile design.

€30.72 €38.61

LED Flagpole Mount — 3/4" round, rear mount, Chrome

-€4.34

CIRO LED Flagpole Mount — 3/4" round, rear mount, Chrome

Rear-mount LED flagpole bracket for compatible LED flagpoles. Hardware and assembly instructions included.

€16.89 €21.23

-€4.34

CIRO Flag Pole Mounting Kit — Chrome, Rear

Fills the antenna hole to mount most 1/4" flag poles; easy installation with hardware included.

€16.89 €21.23

-€14.70

CIRO Flag Pole — 12", 1/4" clamp, Black

Preloaded with a 6" x 9" triple-stitched American flag; pre-assembled with pike top nut and round dome nut; secures with 1/4"-20 threaded hole; compatible with mounts sold separately; made in the USA.

€41.50 €56.20

-€791.33

TRASK Swing Arm — Assault, Raw, TM-3200

Race-inspired billet swing arm — stock length with optional 2–4" stretch; ships raw and unassembled. Kits include chain guides, carbon cover plates, bearings and stainless hardware. Made in USA.

€3,077.36 €3,868.69

-€791.33
Out of Stock

TRASK Swing Arm — Assault, Raw

Race-inspired modular swing arm, lighter than stock, supplied unfinished and unassembled; kits include chain guides, carbon covers, bearings and hardware.

€3,077.36 €3,868.69

-€675.95

TRASK Swing Arm — Assault, Raw

Precision-machined, race-inspired swing arm; pocketed joints, bolt-on replacement, titanium axle and new spherical bearings. Ships unassembled for custom finishing.

€2,624.88 €3,300.83

-€30.37

ACCUTRONIX Swingarm Pivot Blocks — Swingarm, Chrome

Precision CNC‑machined T‑6 billet pivot blocks with included mounting hardware. Made in the USA; designed for reliable alignment and long service life.

€118.14 €148.51

-€30.37

ACCUTRONIX Swingarm Pivot Blocks — Pair, Anodized Black, Aluminum

CNC-machined T-6 billet aluminum. Includes mounting hardware. Made in the USA.

€118.14 €148.51

-€30.33

ACCUTRONIX Swingarm Pivot Blocks — Chrome

CNC-machined T-6 billet aluminum; includes mounting hardware; made in the USA.

€117.92 €148.25

-€6.28
Out of Stock

CIRO American Flag — 27.5 cm x 15.5 cm, Blue/Red/White

Double-sided, triple-stitched flag with extra corner reinforcement. Compatible with select LED flag poles (70600, 70610).

€17.76 €24.04

-€20.63

ACCUTRONIX Economy Fender Spacers — 1" width, front fitment, Chrome

Precision components for narrow glide installations that accept 5/16" bolts. Made in the United States.

€80.22 €100.85

-€23.12

ACCUTRONIX Fender Spacers — 1-1/4" width, fits 5-1/2" fenders, Chrome

Billet fender spacers for mounting wide Glide-style front fenders; accept 5/16" bolts with 3" on-center holes; made in the USA.

€89.91 €113.03

Fender Spacers for Hot/Bagger Legs — 1" width, fits 6" fenders, Black anodized

-€31.96

ACCUTRONIX Fender Spacers for Hot/Bagger Legs — 1" width, fits 6"...

Compatible with Arlen Ness "Hot Legs", American Suspension "Bagger Legs" and stock lower legs. Measure custom fenders for proper fit.

€124.31 €156.27

Fender Spacers for Hot/Bagger Legs — 6" fender width, 1" spacer, front mount, chrome

-€31.96

ACCUTRONIX Fender Spacers for Hot/Bagger Legs — 6" fender width, 1"...

Designed for Arlen Ness "Hot Legs", American Suspension "Bagger Legs" and stock lower legs. Measure the fender for fit. Made in the USA. 41 mm FLH = 3" bolt spacing; 49 mm FLH = 3-1/4".

€124.31 €156.27

Fender Spacers for Hot/Bagger Legs — 1-1/4" width, fits 5-1/2" fender, Chrome, for Bagger Legs

-€31.96

ACCUTRONIX Fender Spacers for Hot/Bagger Legs — 1-1/4" width, fits 5-1/2"...

Designed for Hot Legs and compatible lower legs; measure fender width for custom fits. Made in the USA.

€124.31 €156.27

Fender Spacers for Hot/Bagger Legs — 7/8" width, fits 6-3/8" fenders, black anodized

-€31.96

ACCUTRONIX Fender Spacers for Hot/Bagger Legs — 7/8" width, fits 6-3/8"...

Fits Arlen Ness "Hot Legs", American Suspension "Bagger Legs" and stock lower legs.

Measure custom fenders before installation; fender widths vary.

Made in the USA.

€124.31 €156.27

Fender Spacers for Hot/Bagger Legs — Fender width 6-3/8", spacer width 7/8", Chrome

-€31.96

ACCUTRONIX Fender Spacers for Hot/Bagger Legs — Fender width 6-3/8",...

For Arlen Ness "Hot Legs", American Suspension "Bagger Legs" and stock lower legs. Made in the USA.

€124.31 €156.27

-€23.80

ACCUTRONIX Custom Fender Spacers — 5/8" width, black anodized

Precision CNC-machined spacers with a smooth 2-bolt pattern; fits FLH 49 mm legs with 3-1/4" bolt spacing; Made in the U.S.A.

€92.57 €116.37

-€20.63

ACCUTRONIX Economy Fender Spacers — 1" width, front mount, black

Mounts a narrow glide fender to Mid Glide or Wide Glide 41mm fronts; accepts 5/16" bolts.

€80.22 €100.85

Fender Spacers for Hot/Bagger Legs — 6-3/8" fender width, 7/16" spacer

-€32.19

ACCUTRONIX Fender Spacers for Hot/Bagger Legs — 6-3/8" fender width,...

Fits Arlen Ness "Hot Legs", American Suspension "Bagger Legs" and stock lower legs. Measure custom fenders before ordering. Made in the USA. 41 mm legs use 3" bolt spacing; 49 mm use 3-1/4".

€125.19 €157.38

Fender Spacers for Hot/Bagger Legs — Fits 6-3/8" fenders, 7/16" width

-€32.19

ACCUTRONIX Fender Spacers for Hot/Bagger Legs — Fits 6-3/8" fenders,...

Fender spacers for Hot/Bagger Legs. Measure your fender for custom fits. Made in USA.

€125.19 €157.38

Fender Spacers for Hot/Bagger Legs — 6" fender width, 5/8" mount, Black anodized

-€32.19

ACCUTRONIX Fender Spacers for Hot/Bagger Legs — 6" fender width, 5/8"...

Spacers for Hot/Bagger Legs to adapt fender fitment; measure your fender before installation.

€125.19 €157.38

shop by category

Body & Frame

Body & Frame

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Contact us

Products

Our company

shop by category

Body & Frame  

Body & Frame

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Body & Frame