Body & Frame

Billet Rear Frame Tail Section — 6061 billet aluminum, full race, kit, fits Trask Assault Glides

-€840.37

TRASK Billet Rear Frame Tail Section — 6061 billet aluminum, full...

Race-inspired, lightweight rear tail section that drops over 8 lb from stock. Direct replacement for stock applications. Hardware included; seat not included.

€3,268.09 €4,108.46

-€37.08

PRO-ONE PERF.MFG. Fuel Door — Chrome

Precision CNC-machined fuel access cover that adds a clean accent to the dash. Easy installation with included mounting hardware.

€104.80 €141.88

-€33.23

PRO-ONE PERF.MFG. Fuel Door — Black

Adds a machined accent to the dash with a precise, refined finish.

€74.85 €108.08

-€96.07

TRASK Chin Spoiler — Stock Rake, Unfinished

Hand-laid construction with a gel coat finish; fills the gap between wheel and frame on Baggers; includes hardware and grille insert. Made in the USA.

€373.60 €469.67

-€96.07

TRASK Chin Spoiler — Stock Rake, Unfinished

Hand-laid composite construction with gel coat finish. Fills the gap between the wheel and front frame for a custom look. Includes hardware and grille insert. Made in the USA.

€373.60 €469.67

-€96.07

TRASK Chin Spoiler — Raked, Unfinished

Hand-laid fiberglass chin spoiler with gel coat finish; fills the gap on Bagger front ends and includes hardware and grille insert. Made in the USA.

€373.60 €469.67

-€96.07

TRASK Chin Spoiler — Stock rake, Unfinished

Hand-laid construction with gel coat finish; includes hardware and grille insert; made in USA.

€373.60 €469.67

-€96.07

TRASK Chin Spoiler — Unfinished

Hand-laid construction with gel coat finish; includes hardware and grille insert; made in the USA.

€373.60 €469.67

-€96.07

TRASK V-Line Chin Spoiler — 19.5" H x 11" L x 6" D, unfinished gray

Hand-laid fiberglass chin spoiler measuring 19.5" H x 11" L x 6" D. Fits with stock oil cooler; includes hardware and grille insert. Requires painting before final installation.

€373.60 €469.67

-€96.07

TRASK Chin Spoiler — Stock Rake

Fills the gap between wheel and frame for a clean bagger look; includes hardware and grille insert; supplied unfinished for custom paint.

€373.60 €469.67

-€7.88

PRO-ONE PERF.MFG. Kickstand Wedge — Aluminum, Silver, Kit

Changes the kickstand angle so it does not have to be bent. For lowered models only.

€22.27 €30.15

Fender Spacers for Hot/Bagger Legs — 1-1/4" width, 5-1/2" fender, Black

-€31.19

ACCUTRONIX Fender Spacers for Hot/Bagger Legs — 1-1/4" width, 5-1/2"...

Pair of fender spacers for Hot and Bagger lower legs; measure custom fenders for proper fit.

€121.27 €152.46

Fender Spacers — 1-1/4" spacers, fits 5-1/2" fenders, 3" bolt spacing, black anodized

-€22.55

ACCUTRONIX Fender Spacers — 1-1/4" spacers, fits 5-1/2" fenders, 3" bolt...

Billet spacers accept 5/16" bolts with 3" on-center holes; made in the USA.

€87.72 €110.27

-€8.07

PRO-ONE PERF.MFG. Oil Tank Mount Stud Covers — Chrome

Fits the rubber mounts on Softail oil tanks. High-shine plated finish.

€22.83 €30.90

-€96.07

TRASK Chin Spoiler — Unfinished

Hand-laid fiberglass chin spoiler that helps fill the gap between the wheel and the front of the frame; includes hardware and grille insert. Made in the USA.

€373.60 €469.67

-€107.90
Out of Stock

PRO-ONE PERF.MFG. Oil Cooler Kit — For 1"-1-1/4" frame tubing, 305 mm (12"), Chrome

Complete oil cooler kit with AN #6 fittings, frame-mount clamps and reducers, CNC-machined billet aluminum construction.

€304.91 €412.81

-€94.39

PRO-ONE PERF.MFG. Oil Cooler Kit — For 1"–1-1/4" frame tubing, 305 mm (12")

Compact oil cooler kit with AN #6 fittings, supplied clamps and reducers, and precision-machined components for durable, easy installation.

€266.80 €361.19

Assault Armor Carbon Fiber Chin Spoiler — Front, Air Cooled, Black

-€263.40
Out of Stock

TRASK Assault Armor Carbon Fiber Chin Spoiler — Front, Air Cooled,...

Lightweight spoiler pre-fit to install; includes stainless mesh, brackets and hardware. May require oil cooler cover modification. Not for CVO models.

€1,024.35 €1,287.75

Oil Cooler Kit — For 1"–1-1/4" frame tubing, 305 mm (12 in), 57.2 mm OD (2-1/4 in), Chrome

-€94.39

PRO-ONE PERF.MFG. Oil Cooler Kit — For 1"–1-1/4" frame tubing, 305 mm (12 in),...

Complete oil cooler kit with AN #6 fittings and frame-mount clamps.

CNC-machined billet aluminum construction for precise fit.

€266.80 €361.19

-€791.33

TRASK Swing Arm — Assault, Raw, TM-3200

Race-inspired billet swing arm — stock length with optional 2–4" stretch; ships raw and unassembled. Kits include chain guides, carbon cover plates, bearings and stainless hardware. Made in USA.

€3,077.36 €3,868.69

-€791.33
Out of Stock

TRASK Swing Arm — Assault, Raw

Race-inspired modular swing arm, lighter than stock, supplied unfinished and unassembled; kits include chain guides, carbon covers, bearings and hardware.

€3,077.36 €3,868.69

-€675.95

TRASK Swing Arm — Assault, Raw

Precision-machined, race-inspired swing arm; pocketed joints, bolt-on replacement, titanium axle and new spherical bearings. Ships unassembled for custom finishing.

€2,624.88 €3,300.83

-€30.37

ACCUTRONIX Swingarm Pivot Blocks — Swingarm, Chrome

Precision CNC‑machined T‑6 billet pivot blocks with included mounting hardware. Made in the USA; designed for reliable alignment and long service life.

€118.14 €148.51

-€30.37

ACCUTRONIX Swingarm Pivot Blocks — Pair, Anodized Black, Aluminum

CNC-machined T-6 billet aluminum. Includes mounting hardware. Made in the USA.

€118.14 €148.51

-€30.33

ACCUTRONIX Swingarm Pivot Blocks — Chrome

CNC-machined T-6 billet aluminum; includes mounting hardware; made in the USA.

€117.92 €148.25

-€20.63

ACCUTRONIX Economy Fender Spacers — 1" width, front fitment, Chrome

Precision components for narrow glide installations that accept 5/16" bolts. Made in the United States.

€80.22 €100.85

-€23.12

ACCUTRONIX Fender Spacers — 1-1/4" width, fits 5-1/2" fenders, Chrome

Billet fender spacers for mounting wide Glide-style front fenders; accept 5/16" bolts with 3" on-center holes; made in the USA.

€89.91 €113.03

Fender Spacers for Hot/Bagger Legs — 1" width, fits 6" fenders, Black anodized

-€31.96

ACCUTRONIX Fender Spacers for Hot/Bagger Legs — 1" width, fits 6"...

Compatible with Arlen Ness "Hot Legs", American Suspension "Bagger Legs" and stock lower legs. Measure custom fenders for proper fit.

€124.31 €156.27

Fender Spacers for Hot/Bagger Legs — 6" fender width, 1" spacer, front mount, chrome

-€31.96

ACCUTRONIX Fender Spacers for Hot/Bagger Legs — 6" fender width, 1"...

Designed for Arlen Ness "Hot Legs", American Suspension "Bagger Legs" and stock lower legs. Measure the fender for fit. Made in the USA. 41 mm FLH = 3" bolt spacing; 49 mm FLH = 3-1/4".

€124.31 €156.27

Fender Spacers for Hot/Bagger Legs — 1-1/4" width, fits 5-1/2" fender, Chrome, for Bagger Legs

-€31.96

ACCUTRONIX Fender Spacers for Hot/Bagger Legs — 1-1/4" width, fits 5-1/2"...

Designed for Hot Legs and compatible lower legs; measure fender width for custom fits. Made in the USA.

€124.31 €156.27

shop by category

Body & Frame

Body & Frame

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Contact us

Products

Our company

shop by category

Body & Frame  

Body & Frame

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Body & Frame