Body & Frame (8)

-€18.32
Out of Stock

DRAG SPECIALTIES [object Object]

High-strength steel kickstand; direct OEM replacement; under-stock length for lowered suspension; measurement guidance for Big Twin, Softail, FLT and XL.

€51.77 €70.09

-€15.61
Out of Stock

DRAG SPECIALTIES [object Object]

High-strength steel kickstand; direct OEM replacement. Under-stock lengths for lowered suspension. Measure Big Twin, Softail, FLT and XL from first top bend to first bottom bend.

€44.14 €59.75

-€17.64
Out of Stock

ARLEN NESS Vented Gas Cap — Red anodized, 10 Gauge

Vented gas cap with CNC-machined billet aluminum construction and an exclusive ratchet for correct torque and alignment.

€68.60 €86.24

-€13.47
Out of Stock

DRAG SPECIALTIES [object Object]

High-strength steel kickstand that replaces OEM units for a precise fit. Under-stock length is for bikes with lowered suspension. Measured from the first bend at the top to the first bend at the bottom on Big Twin, Softail, FLT and XL models.

€38.07 €51.54

-€12.78
Out of Stock

DRAG SPECIALTIES [object Object]

High-strength steel kickstand. Direct-fit OEM replacement. Under-stock length available for lowered suspension. Measurement: from first top bend to first bottom bend.

€36.16 €48.94

-€16.54
Out of Stock

ARLEN NESS Vented Gas Cap — CNC billet aluminum, Chrome

Precision-machined cap with exclusive ratchet design for consistent torque and a secure fit.

€64.32 €80.86

-€17.29
Out of Stock

DRAG SPECIALTIES [object Object]

High-strength steel kickstand — direct OEM replacement. Under-stock lengths available for lowered suspension. Measured from the first bend to the first bend on Big Twin, Softail, FLT and XL.

€48.89 €66.18

-€9.88
Out of Stock

ARLEN NESS [object Object]

Extension that increases stock kickstand reach to clear custom floorboards. CNC-machined 6061 aluminum with dual setscrew fasteners.

€38.44 €48.32

-€16.37
Out of Stock

PERFORMANCE MACHINE (PM) Fuel Door — Apex, Black

Adds a custom look to your tank with billet aluminum construction and made in the USA.

€73.66 €90.03

-€7.52
Out of Stock

DRAG SPECIALTIES [object Object]

Improves reach and leverage for hard-to-reach kickstands. Includes mounting hardware; drilling required.

€21.27 €28.79

Flush-Mount Gas Cap — Right-hand thread, Chrome

-€17.15
Out of Stock

KURYAKYN Flush-Mount Gas Cap — Right-hand thread, Chrome

Low-profile flush-mount gas cap that screws into stock openings for screw-in tanks '83 and later; keyed entry and chip-resistant outer rings.

€66.69 €83.84

-€15.52
Out of Stock

DRAG SPECIALTIES [object Object]

Direct-fit replacement kickstand; measurements specified from the foot to the upper pivot center. Shorter versions suit lowered suspension.

€43.85 €59.37

-€15.52
Out of Stock

DRAG SPECIALTIES [object Object]

Direct OEM-fit replacement kickstand. Under-stock lengths suit lowered suspension. Measurements refer to the center portion between the foot and the upper pivot centerline.

€43.85 €59.37

-€17.23
Out of Stock

DRAG SPECIALTIES [object Object]

Direct-replacement kickstand. Under-stock length versions available for lowered suspension. Measurements refer to the center portion between the foot and upper pivot centerline.

€48.67 €65.90

-€17.83
Out of Stock

PERFORMANCE MACHINE (PM) Custom Gas Cap — Screw On, Vented, Black

CNC-machined vented screw-in gas cap, made in the USA.

€69.19 €87.02

-€17.23
Out of Stock

DRAG SPECIALTIES [object Object]

Direct-fit replacement kickstand. Suitable for lowered suspension when selecting under-stock lengths. Measurements refer to the center section between the foot and the upper pivot centerline.

€48.67 €65.90

-€17.83
Out of Stock

PERFORMANCE MACHINE (PM) Custom Gas Cap — Apex, Screw On, Chrome

Precision CNC-machined vented screw-in fuel cap. Made in the USA.

€69.19 €87.02

-€17.83
Out of Stock

PERFORMANCE MACHINE (PM) Custom Gas Cap — Black Ops™, screw-on, vented

CNC machined aircraft-grade aluminum; vented screw-in design; made in the USA.

€69.19 €87.02

-€15.14
Out of Stock

DRAG SPECIALTIES [object Object]

Direct-fit replacement kickstand. Suitable for lowered suspension when listed. Measurements refer to the center section between foot and upper pivot centerline.

€42.78 €57.92

-€17.83
Out of Stock

PERFORMANCE MACHINE (PM) Custom Gas Cap — Array, Screw On, Black

Precision cnc-machined vented screw-in gas cap. Made in the United States.

€69.19 €87.02

-€17.23
Out of Stock

DRAG SPECIALTIES [object Object]

Replaces OEM kickstands perfectly. Under-stock length kickstands are for bikes with lowered suspension. Measurements are taken from the center portion between the foot and the centerline of the upper pivot.

€48.67 €65.90

-€17.83
Out of Stock

PERFORMANCE MACHINE (PM) Custom Gas Cap — Screw-on, vented, chrome

Precision CNC-machined vented screw-in gas cap, durable finish and made in the USA.

€69.19 €87.02

-€17.23
Out of Stock

DRAG SPECIALTIES [object Object]

Direct-fit replacement kickstand. Suitable for lowered suspension when under-stock length is required. Measurements refer to the center portion between the foot and the upper pivot centerline.

€48.67 €65.90

-€20.27
Out of Stock

PERFORMANCE MACHINE (PM) Custom Gas Cap — Black Ops™, vented, screw-on

CNC machined aircraft‑grade aluminum, vented screw‑in cap. Made in the USA.

€78.78 €99.05

-€17.23
Out of Stock

DRAG SPECIALTIES [object Object]

Direct-fit replacement kickstand. Under-stock length available for lowered suspension. Measurements refer to the center section between the foot and the upper pivot centerline.

€48.67 €65.90

-€17.23
Out of Stock

DRAG SPECIALTIES [object Object]

Direct OEM replacement kickstand; under-stock length fits lowered suspension. Measurements refer to the center portion between the foot and the upper pivot centerline.

€48.67 €65.90

-€17.83
Out of Stock

PERFORMANCE MACHINE (PM) Custom Gas Cap — Vented, Screw On, Chrome

Precision CNC machining for a reliable fit. Vented screw-in design for proper tank ventilation. Made in the USA.

€69.19 €87.02

-€19.00
Out of Stock

DRAG SPECIALTIES [object Object]

Direct replacement for OEM kickstands. Under-stock length is intended for bikes with lowered suspension. Measurements refer to the center portion between the foot and the centerline of the upper pivot.

€53.68 €72.68

-€19.00
Out of Stock

DRAG SPECIALTIES [object Object]

Direct replacement for OEM kickstands. Stock-length kickstands suit lowered suspension. Measurements refer to the center section between the foot and the upper pivot centerline.

€53.68 €72.68

-€15.52
Out of Stock

DRAG SPECIALTIES [object Object]

Direct-fit replacement kickstand. Available in under-stock length for lowered suspension. Measurements indicate the center portion between the foot and the upper pivot centerline.

€43.85 €59.37

shop by category

Body & Frame

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Contact us

Products

Our company

shop by category

Body & Frame  

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Body & Frame