Body & Frame (7)

Custom Softail Front Fender — 21" wheel, 44-1/2" contour length, OCF, unfinished

-€73.62

RUSS WERNIMONT DESIGNS Custom Softail Front Fender — 21" wheel, 44-1/2" contour...

14-gauge steel, raw easy-to-paint finish, simple bolt-on installation. Fits LS-2 or OCF styles; made in the USA.

€286.33 €359.95

-€3.01

DRAG SPECIALTIES 1/4" NPT Petcock Rebuild Kit

Rebuild kit for petcock valves; includes replacement seals and internal components for a single unit.

€8.51 €11.52

-€10.13

DRAG SPECIALTIES Easy Find Kickstand Extension — Chrome

Makes hard-to-reach kickstands easier to operate; includes mounting hardware. Drilling required for installation.

€28.61 €38.74

-€82.57

RUSS WERNIMONT DESIGNS Custom Softail Front Fender — 21", 5-1/2" width, Unfinished

14-gauge steel front fender with raw, easy-to-paint finish. Direct bolt-on installation; fender spacers included. Available in LS-2 and OCF lower-edge styles.

€233.38 €315.95

Custom Dresser Front Fender — 105 cm (41-1/4") contour, 19" wheel, unfinished

-€72.90

RUSS WERNIMONT DESIGNS Custom Dresser Front Fender — 105 cm (41-1/4") contour, 19"...

Handmade 14-gauge stamped steel front fender, pre-drilled for easy installation; LS-3 style.

€206.05 €278.95

-€5.97

CIRO Fuel Line Fitting Cover — Chrome

Covers the tank-end fitting on EFI fuel lines. Quick, easy installation and removal for service. Clean, classic look.

€23.25 €29.22

$Kickstand — 267 mm (10-1/2\") , Chrome$

-€13.14

DRAG SPECIALTIES Kickstand — 267 mm (10-1/2\") , Chrome

High-strength replacement that fits OEM mounting points. Under-stock option for lowered suspension; measured per model bends.

€37.14 €50.28

-€27.14

DRAG SPECIALTIES 6" Front Fender — 6" W, front mount

Raw stamped steel front fender measuring approximately 6" W (inside). Mounts with OE hardware. Fenders with trim holes require lower fender skirt.

€76.69 €103.83

Custom Dresser Front Fender — 108 cm contour, 21" wheel fit, 14 cm width, Unfinished

-€56.85

RUSS WERNIMONT DESIGNS Custom Dresser Front Fender — 108 cm contour, 21" wheel fit,...

14-gauge stamped steel front fender, pre-drilled with raw spacer, handmade in the USA. Available in LS-2, LS-3 and OCF styles; finish-ready.

€221.10 €277.95

RUSS WERNIMONT DESIGNS Custom Dresser Front Fender

Durable heavy-gauge steel construction with individual inspections for quality assurance.

€214.03

$Fuel Petcock — 22 mm outlet, 7.9 mm (5/16\") hose barb, Black gloss$

-€8.08

DRAG SPECIALTIES Fuel Petcock — 22 mm outlet, 7.9 mm (5/16\") hose barb, Black...

Reliable three-position fuel valve with filter screen and high-flow design for consistent delivery. Threaded fittings ensure secure attachment.

€22.84 €30.92

-€28.20

DRAG SPECIALTIES Front Fender — 19", 18", 17", 16"

Smooth profile, pre-drilled for quick installation. Durable and ready for finishing.

€79.69 €107.89

-€7.88

PRO-ONE PERF.MFG. Kickstand Wedge — Silver

Designed for lowered models only
Prevents bending of the kickstand
Easy, reversible installation

€22.27 €30.15

-€31.24

DRAG SPECIALTIES 6" Front Fender — 7-1/4" inside mounting width, Unfinished

Stamped front fender; mounts with OE hardware. Use a lower fender skirt if trim holes are present.

€88.27 €119.51

M-8 Softail/Dyna Glide Front Fender — 21", front, Unfinished

-€20.59

DRAG SPECIALTIES M-8 Softail/Dyna Glide Front Fender — 21", front, Unfinished

Direct-fit front fender with predrilled mounting holes and OEM-compatible brackets for straightforward installation.

€58.19 €78.78

-€14.70

DRAG SPECIALTIES Fuel Petcock — 1/4" outlet, 5/16" (7.9 mm) hose barb, bronze

High-flow petcock with a three-position knob (on, off, reserve). Oriented for left-side tank installation with the lever in the off position.

€41.52 €56.22

Chrome Kickstand Components — 11-0122-BC101, Chrome

-€1.97

DRAG SPECIALTIES Chrome Kickstand Components — 11-0122-BC101, Chrome

Replacement component for support stands; restores stable operation and installs with common hand tools.

€5.58 €7.55

-€20.26

DRAG SPECIALTIES M-8 Softail/Dyna Glide Front Fender — 21", unfinished

Steel front fender, predrilled for easy installation; mounts with OEM hardware.

€57.25 €77.51

-€16.04

DRAG SPECIALTIES Fuel Petcock — 1/4" outlet, 5/16" hose barb, Bronze

High-flow petcock with round body and three-position knob (on, off, reserve). Mounts on left side; lever off determines orientation.

€45.33 €61.37

-€1.26

DRAG SPECIALTIES Kickstand Spring — 86.3 mm (3.4 in), Chrome

Durable kickstand spring. Springs are measured from hook to hook. Easy to install.

€3.57 €4.83

-€1.93

DRAG SPECIALTIES Kickstand Bumpers — 6-pack, Black

Protective pads that attach with included double-backed adhesive for fast, tool-free installation.

€5.44 €7.37

-€25.18

DRAG SPECIALTIES Rear Fender — Unfinished, rear mount

Raw, unfinished rear fender predrilled for OEM fender struts and license plate mount.

€71.16 €96.34

$XL Front Fender — 16\", 17\", unfinished$

-€16.59

DRAG SPECIALTIES XL Front Fender — 16\", 17\", unfinished

Steel front fender with a raw finish. Pre-drilled and mounts with OEM hardware for easy installation.

€46.89 €63.48

Custom Dresser Front Fender — 49" contour length, 26" wheel, 6" width, LS-2, Unfinished

-€71.17

RUSS WERNIMONT DESIGNS Custom Dresser Front Fender — 49" contour length, 26" wheel,...

14-gauge stamped steel front fender, hand inspected and pre-drilled for easy installation. Available in LS and OCF styles. Length is contour length; measurements are approximate.

€276.78 €347.95

Flush-Mount Locking Gas Cap — right-hand thread, chrome

-€9.06

DRAG SPECIALTIES Flush-Mount Locking Gas Cap — right-hand thread, chrome

Low-profile gas cap for use with Drag Specialties tanks that accept flush-mount caps.

€25.60 €34.66

-€5.86

DRAG SPECIALTIES Deluxe Gas Cap — Twist-on, left-hand thread, chrome

One-piece chrome-finished gas cap with Nytrel/cork seal; fits pre-82 twist-on tanks (not screw-in).

€16.56 €22.42

-€6.56

DRAG SPECIALTIES Live to Ride Gas Cap Covers — 73 mm (2-7/8"), Chrome

Two-piece gas cap covers with recessed eagle and banner and the "Live to Ride" script; installs with supplied adhesive tape.

€18.55 €25.11

Original-Style Gas Cap — Shovelhead, non-vented, Chrome

-€2.55

DRAG SPECIALTIES Original-Style Gas Cap — Shovelhead, non-vented, Chrome

Replacement gas cap for OEM and custom tanks. Will not fit screw-in type tanks.

€7.22 €9.77

$Live to Ride Gas Cap — 76.2 mm (3\"), right-hand thread$

-€8.92

DRAG SPECIALTIES Live to Ride Gas Cap — 76.2 mm (3\"), right-hand thread

Thread-in gas cap featuring the Live to Ride insignia and classic styling.

€25.19 €34.11

Original-Style Gas Cap — Big Twin, XL, Chrome

-€2.66

DRAG SPECIALTIES Original-Style Gas Cap — Big Twin, XL, Chrome

Replacement gas cap for OEM and custom tanks. Will not fit screw-in type tanks.

€7.52 €10.18

shop by category

Body & Frame

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Contact us

Products

Our company