Body & Frame (7)

-€2.96
Out of Stock

DRAG SPECIALTIES Fuel Tank Outlet Plug — Chrome

Plugs fuel-tank outlets for tanks using a fuel-injection or petcock adapter; includes O‑ring seal.

€8.39 €11.35

-€96.44
Out of Stock

PAUL YAFFE BAGGER NATION Thicky Front Fender — 26" wheel, front, natural finish

Lengthened, one-piece 14-gauge steel front fender with pre-drilled direct bolt-on fit; includes satin spacers and arrives ready for primer and paint.

€375.06 €471.50

The Guzzler® Fuel Valve — 3/8" NPT outlet, -6 AN male connector, Aluminum, Polished

-€54.08
Out of Stock

PINGEL The Guzzler® Fuel Valve — 3/8" NPT outlet, -6 AN male...

Hardcoat anodized billet aluminum and stainless steel construction. Spring-loaded detents for positive on/off positioning; no reserve. Flows up to 211 oz/min. Made in the USA.

€210.31 €264.39

-€47.02
Out of Stock

PINGEL The Guzzler® Fuel Valve — 5/16" outlet, polished aluminum

Inline fuel valve with spring-loaded detents; flows up to 211 oz/min (6.24 L/min). Made in the USA. No reserve available.

€182.82 €229.84

-€21.39
Out of Stock

DRAG SPECIALTIES [object Object]

High-strength steel kickstand, 1" over stock length. Measurements denote the center portion between the foot and the upper pivot centerline.

€60.47 €81.86

Hugger Series Front Fender — Black, 19" fit, 40-3/8" contour

-€75.46
Out of Stock

KLOCK WERKS Hugger Series Front Fender — Black, 19" fit, 40-3/8" contour

Pre-drilled, stamped front fender that adds rigidity and can be trimmed for a kustom look. Protective coating resists corrosion. Requires separate Tire Hugger mounting blocks.

€293.45 €368.91

-€45.61
Out of Stock

PINGEL Power-Flo™ -6AN Fuel Valve — -6 AN, 3/8" NPT, Chrome

High-quality fuel valve for S&S E and G series carburetors. Made in the USA. Fitting sold separately.

€177.39 €223.00

-€20.20
Out of Stock

DRAG SPECIALTIES [object Object]

High-strength steel kickstand with 1” over stock length. Measurements refer to the center portion between the foot and the centerline of the upper pivot.

€57.08 €77.28

-€21.39
Out of Stock

DRAG SPECIALTIES [object Object]

High-strength steel kickstand, 1" over stock length. Measurements refer to the center portion between the foot and the centerline of the upper pivot.

€60.47 €81.86

Hugger Series Front Fender — 19", 40-1/4" contour, 4-1/2" width, Black

-€75.46
Out of Stock

KLOCK WERKS Hugger Series Front Fender — 19", 40-1/4" contour, 4-1/2"...

Stamped steel front fender, pre-drilled and e-coated to resist corrosion. Made in the USA. Requires Klock Werks Tire Hugger mounting blocks (sold separately).

€293.45 €368.91

-€20.20
Out of Stock

DRAG SPECIALTIES [object Object]

High-strength steel kickstand, 1” over stock length. Measurements taken between the foot and the centerline of the upper pivot.

€57.08 €77.28

Hugger Series Front Fender — 19" wheel, 31" contour, Black

-€75.46
Out of Stock

KLOCK WERKS Hugger Series Front Fender — 19" wheel, 31" contour, Black

Thick, kustom-style front fender—pre-drilled and stamped for a consistent finish, e-coated to resist corrosion, made in the USA. Requires Klock Werks Tire Hugger mounting blocks (sold separately).

€293.45 €368.91

Vacuum Fuel Valve — 22 mm thread, 7.9 mm (5/16") hose barb, Chrome

-€68.71
Out of Stock

PINGEL Vacuum Fuel Valve — 22 mm thread, 7.9 mm (5/16") hose barb,...

OEM-style vacuum fuel valve that shuts off fuel when left "on" with the engine off.

Single 5/16" hose barb outlet
Fitment for '75-'93, works for '94-'99 with 22 mm thread, options for '66-'74 internally threaded tanks
Made in the USA

€267.24 €335.95

-€21.39
Out of Stock

DRAG SPECIALTIES Kickstand — Extended 25,4 mm (1")

High-strength steel kickstand with a 1" over stock length for enhanced support.

€60.47 €81.86

Hugger Series Front Fender — 21-7/8" contour, 4-1/2" width, 19" wheel, Black

-€75.46
Out of Stock

KLOCK WERKS Hugger Series Front Fender — 21-7/8" contour, 4-1/2" width,...

Stamped steel front fender that adds front-end rigidity, pre-drilled for consistent fit and e-coated to resist rust. Requires Klock Werks Tire Hugger mounting blocks (sold separately).

€293.45 €368.91

$Vacuum Fuel Valve — 22 mm outlet, 5/16\" hose barb, Chrome$

-€68.71
Out of Stock

PINGEL Vacuum Fuel Valve — 22 mm outlet, 5/16\" hose barb, Chrome

Vacuum-operated fuel valve with automatic shutoff, single outlet for stock vacuum line, fits multiple model years. Made in USA.

€267.24 €335.95

-€20.70
Out of Stock

DRAG SPECIALTIES [object Object]

High-strength steel kickstand, 1” over stock length. Measurements refer to the center portion between the foot and the centerline of the upper pivot.

€58.51 €79.21

Power-Flo Fuel Valve — 3/8" NPT outlet, 5/16" (7.9 mm) hose barb, Gold

-€32.80
Out of Stock

PINGEL Power-Flo Fuel Valve — 3/8" NPT outlet, 5/16" (7.9 mm) hose...

Substantially higher fuel flow than OEM or aftermarket valves; necessary for adequate delivery on stock and high-performance motorcycles. Made in the USA. Not legal for use in CA.

€127.58 €160.38

-€22.00
Out of Stock

DRAG SPECIALTIES Kickstand — Extended 25,4 mm (1")

High-strength steel kickstand with 1” over stock length for added support.

€62.22 €84.22

Hugger Series Front Fender — 19" wheel, 26-3/8" contour

-€75.46
Out of Stock

KLOCK WERKS Hugger Series Front Fender — 19" wheel, 26-3/8" contour

Thick, rigid fender that can be trimmed for a custom look; pre-drilled and stamped; factory corrosion protection; made in USA. Mounting blocks required (sold separately).

€293.45 €368.91

$Power-Flo Fuel Valve — 22 mm outlet, 7.9 mm (5/16\") hose barb, gold$

-€37.92
Out of Stock

PINGEL Power-Flo Fuel Valve — 22 mm outlet, 7.9 mm (5/16\") hose...

Substantially higher fuel flow for improved performance and reliability. Made in the USA. Not legal for use in CA.

€147.50 €185.42

-€21.39
Out of Stock

DRAG SPECIALTIES [object Object]

High-strength steel kickstand, 1" over stock length. Measurements refer to the center portion between the foot and the centerline of the upper pivot.

€60.47 €81.86

Power-Flo Fuel Valve — 3/8" NPT outlet, 7.9 mm (5/16") hose barb, Gold

-€32.80
Out of Stock

PINGEL Power-Flo Fuel Valve — 3/8" NPT outlet, 7.9 mm (5/16") hose...

Higher fuel flow than OEM and most aftermarket valves. Required for reliable delivery on stock and high-performance motorcycles. Made in the USA. Not legal for use in CA.

€127.58 €160.38

Hugger Series Front Fender with Mounting Blocks for Softail/Dyna — 19" wheel, 40-3/8" contour length, Black

-€103.01
Out of Stock

KLOCK WERKS Hugger Series Front Fender with Mounting Blocks for...

Stamped 14-gauge steel Hugger front fender with satin mounting blocks; laser-cut and pre-drilled for a precise fit on Softail/Dyna.

€400.63 €503.64

$Power-Flo Fuel Valve — 22 mm outlet, 7.9 mm (5/16\") hose barb, Gold$

-€37.92
Out of Stock

PINGEL Power-Flo Fuel Valve — 22 mm outlet, 7.9 mm (5/16\") hose...

Delivers substantially higher fuel flow than OEM or aftermarket valves. Necessary for adequate fuel delivery on stock and high-performance motorcycles. Made in the USA. Not legal for use in CA.

€147.50 €185.42

Hugger Series Front Fender with Mounting Blocks for Softail/Dyna — 19" wheel, 31" contour, Black E-coating

-€103.01
Out of Stock

KLOCK WERKS Hugger Series Front Fender with Mounting Blocks for...

Stamped 14-gauge steel front fender with 13-step e-coated finish; laser cut, pre-drilled, includes zinc-plated mounting hardware. Made in the USA.

€400.63 €503.64

-€84.09
Out of Stock

DRAG SPECIALTIES [object Object]

Center Stand lifts the motorcycle upright for easier cleaning and servicing. Adjustable feet allow the rear tire to be lifted; bolt-on design preserves lean angle. Compatible with OE and Profile rear suspension. Not for use with adjustable passenger floorboard mount kit OEM# 50768-07.

€237.66 €321.75

Hugger Series Front Fender with Mounting Blocks for Softail/Dyna — Front, 19" wheel, Black, E-coated

-€103.01
Out of Stock

KLOCK WERKS Hugger Series Front Fender with Mounting Blocks for...

Stamped 14-gauge steel front fender with 13-step E-coated finish. Laser cut and pre-drilled; includes zinc-plated mounting hardware. Made in the USA.

€400.63 €503.64

-€1.47
Out of Stock

DRAG SPECIALTIES [object Object]

Durable kickstand spring measured hook-to-hook for precise fit and reliable support.

€4.15 €5.62

Hugger Series Front Fender with Mounting Blocks for Softail/Dyna — 19" wheel, 26-3/8" contour, black

-€103.01
Out of Stock

KLOCK WERKS Hugger Series Front Fender with Mounting Blocks for...

Stamped steel front fender with E-coated finish, laser-cut and pre-drilled; includes zinc-plated mounting hardware. Fits Softail/Dyna.

€400.63 €503.64

shop by category

Body & Frame

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Contact us

Products

Our company

shop by category

Body & Frame  

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Body & Frame