Body & Frame (6)

-€28.60
Out of Stock

JAGG OIL COOLERS Oil Filter Adapter — Black anodized, billet aluminum

Installs between the oil filter landing and filter to provide full-time oil flow to an oil cooler. HyperFlow design, NPT port, ProLine swivel fittings for easy plumbing.

€111.24 €139.84

-€3.45
Out of Stock

JAGG OIL COOLERS Viscosity Regulated Flow Actuator Kit — VRF, Black

Replaces the thermostatic actuator element with a VRF plug that routes oil to bypass the cooler during cold starts and sends hot, filtered oil to the cooler at operating temperature. Kit includes plug, spring, button head, O-ring and gasket. Made in the USA.

€13.47 €16.92

-€11.51
Out of Stock

KLOCK WERKS Oil Cooler Guard — Black

Precision-cut oil cooler guard that adds visual pop to the center of the oil cooler trim. Easy to install and made in the USA.

€44.75 €56.26

-€85.47
Out of Stock

PAUL YAFFE BAGGER NATION DEI Front Fender — 21", E-coated, Unfinished

Complete redesign of the classic Yaffe fender — one-piece 14-gauge steel, pre-drilled, E-coated. Satin and black adapters included.

€332.35 €417.82

-€96.44
Out of Stock

PAUL YAFFE BAGGER NATION DEI Front Fender — 23", Unfinished

Redesigned DEI front fender: one-piece 14-gauge steel, pre-drilled, E-coated; satin and black adapters included. Made in USA.

€375.06 €471.50

Offset Oil Filter Adapter — Oil Filter, Black

-€36.48
Out of Stock

JAGG OIL COOLERS Offset Oil Filter Adapter — Oil Filter, Black

Automatic thermostatic bypass valve speeds warm-up; installs between engine and filter to accept an auxiliary oil cooler. Made in the USA.

€141.88 €178.36

-€96.44
Out of Stock

PAUL YAFFE BAGGER NATION DEI Front Fender — 26", unfinished, E-coating

Complete Yaffe redesign with lengthened front/rear, thickened sidewalls, single-piece 14-gauge construction; pre-drilled and includes satin and black adapters.

€375.06 €471.50

Vertical Frame-Mount Oil Cooler Kit — 6-row, frame-mount, black

-€96.53
Out of Stock

JAGG OIL COOLERS Vertical Frame-Mount Oil Cooler Kit — 6-row, frame-mount, black

Precision turbulators and mini-louvered fins maximize heat transfer to keep your engine cooler. Multipass flow and included installation components make for reliable performance and straightforward fitment. Made in the USA.

€375.41 €471.94

-€91.34
Out of Stock

PAUL YAFFE BAGGER NATION Talon Front Fender — 21" wheel, e-coating

Radically styled Talon front fender with pre-drilled mounting and included satin-finish spacer. Made in the USA.

€355.26 €446.60

-€85.79
Out of Stock

JAGG OIL COOLERS Vertical Frame-Mount Oil Cooler Kit — 6-row, frame-mount, black

High-performance oil cooler kit with advanced turbulators and mini-louvered fins for superior heat transfer and reliable installation components.

€333.61 €419.40

Talon Front Fender — 23", black, e-coated

-€96.44
Out of Stock

PAUL YAFFE BAGGER NATION Talon Front Fender — 23", black, e-coated

Radical claw-shaped front fender; 14-gauge steel, pre-drilled for installation; e-coated finish; satin spacer included; made in USA.

€375.06 €471.50

-€87.94
Out of Stock

JAGG OIL COOLERS Oil Cooler Kit — 6-row, low mount, Black

Advanced oil cooling with turbulators and mini-louvered fins for maximum heat transfer and minimal pressure loss. Includes installation components. Made in the USA.

€341.95 €429.89

Talon Front Fender — 26" wheel, front, e-coating

-€96.44
Out of Stock

PAUL YAFFE BAGGER NATION Talon Front Fender — 26" wheel, front, e-coating

Radically styled front fender with 14-gauge steel construction, pre-drilled for installation, e-coated finish and satin-finish spacer included. Made in the USA.

€375.06 €471.50

Vertical Frame-Mount Oil Cooler Kit — 10-row, Black

-€104.92
Out of Stock

JAGG OIL COOLERS Vertical Frame-Mount Oil Cooler Kit — 10-row, Black

Specially designed turbulators increase heat dissipation; mini-louvered fins and multipass flow optimize cooling. Includes installation components. Made in USA.

€408.05 €512.97

Oil Cooler Kit — 10-row, low-mount, Black

-€98.94
Out of Stock

JAGG OIL COOLERS Oil Cooler Kit — 10-row, low-mount, Black

Oil cooler kit that improves cooling with mini-louvered fins, multipass flow, and included installation hardware. Made in the USA.

€384.80 €483.74

-€96.44
Out of Stock

PAUL YAFFE BAGGER NATION Thicky Front Fender — 23", Natural

Redesigned one-piece 14-gauge steel front fender with squared ends and thicker sidewalls; pre-drilled, direct bolt-on, comes in natural finish with satin spacers included.

€375.06 €471.50

Low-Mount Fan-Assisted Oil Cooler Kit — 10-row, low-mount, black

-€126.39
Out of Stock

JAGG OIL COOLERS Low-Mount Fan-Assisted Oil Cooler Kit — 10-row, low-mount, black

High-performance low-mount oil cooler with automatic fan control for reliable cooling in stop-and-go and highway riding.

€491.52 €617.91

-€96.44
Out of Stock

PAUL YAFFE BAGGER NATION Thicky Front Fender — 26" wheel, front, natural finish

Lengthened, one-piece 14-gauge steel front fender with pre-drilled direct bolt-on fit; includes satin spacers and arrives ready for primer and paint.

€375.06 €471.50

Oil Cooler Kit — 10-row, low mount horizontal, Black

-€98.94
Out of Stock

JAGG OIL COOLERS Oil Cooler Kit — 10-row, low mount horizontal, Black

Multipass flow and mini-louvered fins for maximum cooling.
Specially designed turbulators enhance heat dissipation.
Includes installation components; made in the USA.

€384.80 €483.74

Low-Mount Fan-Assisted Oil Cooler Kit — 10-row, black

-€126.39
Out of Stock

JAGG OIL COOLERS Low-Mount Fan-Assisted Oil Cooler Kit — 10-row, black

Fan-assisted oil cooler kit optimized for low-speed and highway performance. Includes cooler, hoses, fan switch wiring, offset oil filter adaptor, and mounting hardware. Fan activates at ~205°F and delivers 150 cfm.

€491.52 €617.91

Hugger Series Front Fender — Black, 19" fit, 40-3/8" contour

-€75.46
Out of Stock

KLOCK WERKS Hugger Series Front Fender — Black, 19" fit, 40-3/8" contour

Pre-drilled, stamped front fender that adds rigidity and can be trimmed for a kustom look. Protective coating resists corrosion. Requires separate Tire Hugger mounting blocks.

€293.45 €368.91

-€96.53
Out of Stock

JAGG OIL COOLERS Oil Cooler Kit — 10-row, Low mount, Black

Specially designed turbulators and mini-louvered fins deliver efficient oil cooling and longer engine life; includes installation components.

€375.41 €471.94

Low-Mount Fan-Assisted Oil Cooler Kit — 10-row, horizontal, Black

-€126.39
Out of Stock

JAGG OIL COOLERS Low-Mount Fan-Assisted Oil Cooler Kit — 10-row, horizontal, Black

Fan-assisted low-mount oil cooler kit for stop-and-go and highway use. Automatic fan at ~205°F, 150 cfm; includes hoses and mounting hardware.

€491.52 €617.91

Hugger Series Front Fender — 19", 40-1/4" contour, 4-1/2" width, Black

-€75.46
Out of Stock

KLOCK WERKS Hugger Series Front Fender — 19", 40-1/4" contour, 4-1/2"...

Stamped steel front fender, pre-drilled and e-coated to resist corrosion. Made in the USA. Requires Klock Werks Tire Hugger mounting blocks (sold separately).

€293.45 €368.91

Hugger Series Front Fender — 19" wheel, 31" contour, Black

-€75.46
Out of Stock

KLOCK WERKS Hugger Series Front Fender — 19" wheel, 31" contour, Black

Thick, kustom-style front fender—pre-drilled and stamped for a consistent finish, e-coated to resist corrosion, made in the USA. Requires Klock Werks Tire Hugger mounting blocks (sold separately).

€293.45 €368.91

Hugger Series Front Fender — 21-7/8" contour, 4-1/2" width, 19" wheel, Black

-€75.46
Out of Stock

KLOCK WERKS Hugger Series Front Fender — 21-7/8" contour, 4-1/2" width,...

Stamped steel front fender that adds front-end rigidity, pre-drilled for consistent fit and e-coated to resist rust. Requires Klock Werks Tire Hugger mounting blocks (sold separately).

€293.45 €368.91

Hugger Series Front Fender — 19" wheel, 26-3/8" contour

-€75.46
Out of Stock

KLOCK WERKS Hugger Series Front Fender — 19" wheel, 26-3/8" contour

Thick, rigid fender that can be trimmed for a custom look; pre-drilled and stamped; factory corrosion protection; made in USA. Mounting blocks required (sold separately).

€293.45 €368.91

Hugger Series Front Fender with Mounting Blocks for Softail/Dyna — 19" wheel, 40-3/8" contour length, Black

-€103.01
Out of Stock

KLOCK WERKS Hugger Series Front Fender with Mounting Blocks for...

Stamped 14-gauge steel Hugger front fender with satin mounting blocks; laser-cut and pre-drilled for a precise fit on Softail/Dyna.

€400.63 €503.64

$Stainless Steel Braided Hose — 7.9 mm (5/16\"), 7.62 m (25')$

-€41.28
Out of Stock

DRAG SPECIALTIES Stainless Steel Braided Hose — 7.9 mm (5/16\"), 7.62 m (25')

For oil and gas applications; do not use with fuels over 10% alcohol.

€116.72 €158.00

Hugger Series Front Fender with Mounting Blocks for Softail/Dyna — 19" wheel, 31" contour, Black E-coating

-€103.01
Out of Stock

KLOCK WERKS Hugger Series Front Fender with Mounting Blocks for...

Stamped 14-gauge steel front fender with 13-step e-coated finish; laser cut, pre-drilled, includes zinc-plated mounting hardware. Made in the USA.

€400.63 €503.64

shop by category

Body & Frame

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Contact us

Products

Our company

shop by category

Body & Frame  

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Body & Frame