Body & Frame (6)

Extended Smooth-Top QuickBob™ Rubber-Mount Gas Tank — 3.9 US gal, 22 mm outlet, raw finish

Out of Stock

DRAG SPECIALTIES Extended Smooth-Top QuickBob™ Rubber-Mount Gas Tank — 3.9 US...

Extended QuickBob™ smooth-top rubber-mount fuel tank with a flowing profile, rear seat cutout and included mounting brackets. Ships unpainted; caps not included.

€237.57

Tire Hugger Series Front Fenders for Dressers — 6.5" width, 26" wheel

Out of Stock

KLOCK WERKS Tire Hugger Series Front Fenders for Dressers — 6.5" width,...

Durable steel front fender for dressers, pre-drilled and e-coated to resist rust; includes zinc-plated mounting hardware.

€312.47

Out of Stock

JAGG OIL COOLERS Oil Filter Adapter Service Kit — Black

Includes two replacement O-rings and clear instructions. Made in the USA. Ideal for routine oil filter adapter maintenance.

€8.57

Out of Stock

DRAG SPECIALTIES Custom Bolt Kit for Flat Side Tanks — Chrome, Aluminum, Flatside

Replaces front OEM gas tank mounting bolts. Includes four 5/16"-18 x 3/4" flathead Allen bolts with recessed washers.

€13.51

Out of Stock

JAGG OIL COOLERS Manual By-pass Valve Service Kit — Black, Silver

Complete manual by-pass valve service kit with two O-rings, a snap-ring retaining clip, and a spare decal. Made in the USA.

€4.83

Out of Stock

ARLEN NESS [object Object]

Extension that increases stock kickstand reach to clear custom floorboards. CNC-machined 6061 aluminum with dual setscrew fasteners.

€37.21

Out of Stock

DRAG SPECIALTIES Custom One-Piece Gas Tank Mounting Kit — Black, Chrome, Bolt-On

Complete kit with front and rear tank mounts, rubber grommets and all necessary hardware for installation.

€37.72

Tire Hugger Series Front Fenders for Dressers — 6.5" width, fits 23" wheel, Black, E-Coating

Out of Stock

KLOCK WERKS Tire Hugger Series Front Fenders for Dressers — 6.5" width,...

Heavy-gauge steel front fenders for Dressers — pre-drilled and stamped, e-coated, includes zinc-plated mounting hardware, made in USA.

€378.76

Out of Stock

JAGG OIL COOLERS Automatic By-Pass Valve — SK4050-T, Black

Automatic valve that bypasses the oil cooler for faster warm-ups and reliable cold-weather performance.

€24.45

Out of Stock

DRAG SPECIALTIES [object Object]

Improves reach and leverage for hard-to-reach kickstands. Includes mounting hardware; drilling required.

€20.59

Out of Stock

DRAG SPECIALTIES [object Object]

Direct-fit replacement kickstand; measurements specified from the foot to the upper pivot center. Shorter versions suit lowered suspension.

€42.45

Tire Hugger Series Front Fenders for Dressers — 6.5" width, 26" wheel, raked frame fit, Black

Out of Stock

KLOCK WERKS Tire Hugger Series Front Fenders for Dressers — 6.5" width,...

Steel Tire Hugger front fenders for Dressers — pre-drilled and stamped, E-coated, includes zinc-plated mounting hardware. Made in the U.S.A.

€378.76

Out of Stock

JAGG OIL COOLERS Thermal Switch — 190°F, Black

Miniature thermal switch for 12V accessories; normally open, NPT 1/8" probe, automatic activation, made in the USA.

€21.97

Out of Stock

DRAG SPECIALTIES [object Object]

Direct OEM-fit replacement kickstand. Under-stock lengths suit lowered suspension. Measurements refer to the center portion between the foot and the upper pivot centerline.

€42.45

Tire Hugger Series Front Fenders for Dressers — 6.5" width, 26" wheel, raked frame, Black

Out of Stock

KLOCK WERKS Tire Hugger Series Front Fenders for Dressers — 6.5" width,...

Thick stamped steel front fenders — pre-drilled, e-coated to resist rust, 6.5" outside width. Includes zinc-plated mounting hardware. Made in the U.S.A.

€378.76

Out of Stock

JAGG OIL COOLERS Miniature Thermal Switch — 200°F, Brass

Switches 12V accessories at a preset temperature. Normally open design, NPT 1/8" probe for oil-source mounting, easy wiring, made in USA.

€21.97

Out of Stock

DRAG SPECIALTIES [object Object]

Direct-replacement kickstand. Under-stock length versions available for lowered suspension. Measurements refer to the center portion between the foot and upper pivot centerline.

€47.11

Out of Stock

JAGG OIL COOLERS Hose Finishers — Black anodized, 4-pack

Finish push-on single-barbed hose ends with integrated worm-drive clamps. Fits 3/8" (-06) push-on hose; not compatible with AN-style fittings.

€20.60

Out of Stock

DRAG SPECIALTIES [object Object]

Direct-fit replacement kickstand. Suitable for lowered suspension when selecting under-stock lengths. Measurements refer to the center section between the foot and the upper pivot centerline.

€47.11

Hose Finishers — 4 Pack, Silver Anodized

Out of Stock

JAGG OIL COOLERS Hose Finishers — 4 Pack, Silver Anodized

Integrated worm-drive hose finishers for push-on single-barbed hose ends; 7/8" clamps fit 3/8" (-06) hose. Not compatible with AN-style or Jagg/Susa AN-PushLock fittings.

€20.60

Out of Stock

PAUL YAFFE BAGGER NATION DEI Front Fender — 21", steel, e-coated

Modern redesign of the classic Yaffe fender
Lengthened front and rear, thicker sidewalls
Single-piece 14-gauge steel, no welds
Pre-drilled; satin and black adapters included
E-coated finish; made in the USA

€321.72

Out of Stock

JAGG OIL COOLERS Hose Separator — black anodized

Keeps oil lines organized and neat with a quick snap-in installation.

€8.30

$DEI Front Fender — 23\", steel, E-Coating$

Out of Stock

PAUL YAFFE BAGGER NATION DEI Front Fender — 23\", steel, E-Coating

Redesigned Yaffe-style front fender with extended coverage, pre-drilled mounting, and satin and black adapters included.

€363.06

Out of Stock

JAGG OIL COOLERS Hose Separator — Bolt-On, Chrome

Organizes and protects oil lines; fits 3/8" (-06) hoses; quick snap installation.

€8.30

Out of Stock

DRAG SPECIALTIES [object Object]

Replaces OEM kickstands perfectly. Under-stock length kickstands are for bikes with lowered suspension. Measurements are taken from the center portion between the foot and the centerline of the upper pivot.

€47.11

Out of Stock

PAUL YAFFE BAGGER NATION DEI Front Fender — 26", E-coating

Complete redesign of the classic Yaffe front fender; lengthened front and rear, thickened sidewalls, 14-gauge steel, pre-drilled, e-coated finish; includes satin and black adapters.

€363.06

Out of Stock

JAGG OIL COOLERS Frame Clamp — 1" frame tubing, black

Securely mounts Jagg oil coolers and other accessories on tubular frames while isolating from vibration. Made in the USA.

€7.46

Out of Stock

DRAG SPECIALTIES [object Object]

Direct-fit replacement kickstand. Suitable for lowered suspension when under-stock length is required. Measurements refer to the center portion between the foot and the upper pivot centerline.

€47.11

Frame Clamp — For 1-1/8 in frame tubing, Black

Out of Stock

JAGG OIL COOLERS Frame Clamp — For 1-1/8 in frame tubing, Black

Mounts universal and custom oil coolers and other components to tubular frames; isolates from vibration. Made in the USA.

€7.46

Out of Stock

DRAG SPECIALTIES [object Object]

Direct-fit replacement kickstand. Under-stock length available for lowered suspension. Measurements refer to the center section between the foot and the upper pivot centerline.

€47.11

shop by category

Body & Frame

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Contact us

Products

Our company

shop by category

Body & Frame  

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Body & Frame