Body & Frame (6)

-€5.45
Out of Stock

PINGEL Petcock Bung — 3/8" NPT, aluminum, Silver

Weld-on bung for installing a petcock on custom or stock fuel tanks. Made in the USA.

€21.20 €26.65

-€6.89
Out of Stock

DRAG SPECIALTIES [object Object]

Low-profile extension that improves access to hard-to-reach kickstands; includes mounting hardware. Drilling required.

€19.49 €26.38

-€96.44
Out of Stock

PAUL YAFFE BAGGER NATION DEI Front Fender — 23", Unfinished

Redesigned DEI front fender: one-piece 14-gauge steel, pre-drilled, E-coated; satin and black adapters included. Made in USA.

€375.06 €471.50

-€6.89
Out of Stock

DRAG SPECIALTIES [object Object]

Extension plate that makes hard-to-reach kickstands easier to operate. Includes mounting hardware; drilling required.

€19.49 €26.38

-€96.44
Out of Stock

PAUL YAFFE BAGGER NATION DEI Front Fender — 26", unfinished, E-coating

Complete Yaffe redesign with lengthened front/rear, thickened sidewalls, single-piece 14-gauge construction; pre-drilled and includes satin and black adapters.

€375.06 €471.50

-€15.42
Out of Stock

PINGEL Weldless Tank Bung — Black, Stainless steel, CNC billet aluminum

Leak-resistant weldless bung with 1/8" NPT internal thread, Viton O-ring, stainless hardware and 80 micron filter.

€59.95 €75.37

-€91.34
Out of Stock

PAUL YAFFE BAGGER NATION Talon Front Fender — 21" wheel, e-coating

Radically styled Talon front fender with pre-drilled mounting and included satin-finish spacer. Made in the USA.

€355.26 €446.60

The Guzzler® Fuel Valve — 3/8 in NPT, 5/16 in hose barb, Polished aluminum

-€50.67
Out of Stock

PINGEL The Guzzler® Fuel Valve — 3/8 in NPT, 5/16 in hose barb,...

Spring-loaded detents for positive on-off positioning; flows up to 211 oz/min (≈6.24 L/min); made in the USA.

€197.03 €247.70

Talon Front Fender — 23", black, e-coated

-€96.44
Out of Stock

PAUL YAFFE BAGGER NATION Talon Front Fender — 23", black, e-coated

Radical claw-shaped front fender; 14-gauge steel, pre-drilled for installation; e-coated finish; satin spacer included; made in USA.

€375.06 €471.50

-€62.24
Out of Stock

DRAG SPECIALTIES [object Object]

Lifts the motorcycle upright for easier cleaning and maintenance; bolt-on design preserves lean angle.

€175.92 €238.16

Talon Front Fender — 26" wheel, front, e-coating

-€96.44
Out of Stock

PAUL YAFFE BAGGER NATION Talon Front Fender — 26" wheel, front, e-coating

Radically styled front fender with 14-gauge steel construction, pre-drilled for installation, e-coated finish and satin-finish spacer included. Made in the USA.

€375.06 €471.50

The Guzzler® Fuel Valve — 22 mm outlet, 9.5 mm (3/8") hose barb, polished aluminum

-€54.62
Out of Stock

PINGEL The Guzzler® Fuel Valve — 22 mm outlet, 9.5 mm (3/8") hose...

High-flow fuel valve with spring-loaded detents for positive on-off positioning. Flows up to 211 oz/min. Made in the USA.

€212.43 €267.05

-€16.68
Out of Stock

PINGEL Fuel Valve Adapter — 22 mm, Silver

Improves fuel flow and retains the stock crossover connection on '35-'65 style Harley-Davidson split fuel tanks; installs inline with a threaded aftermarket valve (sold separately).

€64.84 €81.52

-€96.44
Out of Stock

PAUL YAFFE BAGGER NATION Thicky Front Fender — 23", Natural

Redesigned one-piece 14-gauge steel front fender with squared ends and thicker sidewalls; pre-drilled, direct bolt-on, comes in natural finish with satin spacers included.

€375.06 €471.50

-€96.44
Out of Stock

PAUL YAFFE BAGGER NATION Thicky Front Fender — 26" wheel, front, natural finish

Lengthened, one-piece 14-gauge steel front fender with pre-drilled direct bolt-on fit; includes satin spacers and arrives ready for primer and paint.

€375.06 €471.50

The Guzzler® Fuel Valve — 3/8" NPT outlet, -6 AN male connector, Aluminum, Polished

-€54.08
Out of Stock

PINGEL The Guzzler® Fuel Valve — 3/8" NPT outlet, -6 AN male...

Hardcoat anodized billet aluminum and stainless steel construction. Spring-loaded detents for positive on/off positioning; no reserve. Flows up to 211 oz/min. Made in the USA.

€210.31 €264.39

-€47.02
Out of Stock

PINGEL The Guzzler® Fuel Valve — 5/16" outlet, polished aluminum

Inline fuel valve with spring-loaded detents; flows up to 211 oz/min (6.24 L/min). Made in the USA. No reserve available.

€182.82 €229.84

-€21.39
Out of Stock

DRAG SPECIALTIES [object Object]

High-strength steel kickstand, 1" over stock length. Measurements denote the center portion between the foot and the upper pivot centerline.

€60.47 €81.86

Hugger Series Front Fender — Black, 19" fit, 40-3/8" contour

-€75.46
Out of Stock

KLOCK WERKS Hugger Series Front Fender — Black, 19" fit, 40-3/8" contour

Pre-drilled, stamped front fender that adds rigidity and can be trimmed for a kustom look. Protective coating resists corrosion. Requires separate Tire Hugger mounting blocks.

€293.45 €368.91

-€45.61
Out of Stock

PINGEL Power-Flo™ -6AN Fuel Valve — -6 AN, 3/8" NPT, Chrome

High-quality fuel valve for S&S E and G series carburetors. Made in the USA. Fitting sold separately.

€177.39 €223.00

-€20.20
Out of Stock

DRAG SPECIALTIES [object Object]

High-strength steel kickstand with 1” over stock length. Measurements refer to the center portion between the foot and the centerline of the upper pivot.

€57.08 €77.28

-€21.39
Out of Stock

DRAG SPECIALTIES [object Object]

High-strength steel kickstand, 1" over stock length. Measurements refer to the center portion between the foot and the centerline of the upper pivot.

€60.47 €81.86

Hugger Series Front Fender — 19", 40-1/4" contour, 4-1/2" width, Black

-€75.46
Out of Stock

KLOCK WERKS Hugger Series Front Fender — 19", 40-1/4" contour, 4-1/2"...

Stamped steel front fender, pre-drilled and e-coated to resist corrosion. Made in the USA. Requires Klock Werks Tire Hugger mounting blocks (sold separately).

€293.45 €368.91

-€20.20
Out of Stock

DRAG SPECIALTIES [object Object]

High-strength steel kickstand, 1” over stock length. Measurements taken between the foot and the centerline of the upper pivot.

€57.08 €77.28

Hugger Series Front Fender — 19" wheel, 31" contour, Black

-€75.46
Out of Stock

KLOCK WERKS Hugger Series Front Fender — 19" wheel, 31" contour, Black

Thick, kustom-style front fender—pre-drilled and stamped for a consistent finish, e-coated to resist corrosion, made in the USA. Requires Klock Werks Tire Hugger mounting blocks (sold separately).

€293.45 €368.91

Vacuum Fuel Valve — 22 mm thread, 7.9 mm (5/16") hose barb, Chrome

-€68.71
Out of Stock

PINGEL Vacuum Fuel Valve — 22 mm thread, 7.9 mm (5/16") hose barb,...

OEM-style vacuum fuel valve that shuts off fuel when left "on" with the engine off.

Single 5/16" hose barb outlet
Fitment for '75-'93, works for '94-'99 with 22 mm thread, options for '66-'74 internally threaded tanks
Made in the USA

€267.24 €335.95

-€21.39
Out of Stock

DRAG SPECIALTIES Kickstand — Extended 25,4 mm (1")

High-strength steel kickstand with a 1" over stock length for enhanced support.

€60.47 €81.86

Hugger Series Front Fender — 21-7/8" contour, 4-1/2" width, 19" wheel, Black

-€75.46
Out of Stock

KLOCK WERKS Hugger Series Front Fender — 21-7/8" contour, 4-1/2" width,...

Stamped steel front fender that adds front-end rigidity, pre-drilled for consistent fit and e-coated to resist rust. Requires Klock Werks Tire Hugger mounting blocks (sold separately).

€293.45 €368.91

$Vacuum Fuel Valve — 22 mm outlet, 5/16\" hose barb, Chrome$

-€68.71
Out of Stock

PINGEL Vacuum Fuel Valve — 22 mm outlet, 5/16\" hose barb, Chrome

Vacuum-operated fuel valve with automatic shutoff, single outlet for stock vacuum line, fits multiple model years. Made in USA.

€267.24 €335.95

-€20.70
Out of Stock

DRAG SPECIALTIES [object Object]

High-strength steel kickstand, 1” over stock length. Measurements refer to the center portion between the foot and the centerline of the upper pivot.

€58.51 €79.21

shop by category

Body & Frame

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Contact us

Products

Our company

shop by category

Body & Frame  

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Body & Frame