Body & Frame (5)

-€16.71

MOTION PRO Auxiliary Fuel Tank — 1.9 L (0.5 US gal)

Portable auxiliary tank for tuning or refilling; includes 4' of 1/4" fuel line and a 1/4" in-line barb. Holds about 2,000 cc (0.5 gal).

€47.24 €63.95

-€46.96

ARLEN NESS Bagger-Tail Rear Fender Kit — ARLEN NESS, Rear, 06-479

Extended composite rear fender kit fills gap between fender and saddlebags; fits up to 200 mm rear tire; primed and ready to paint.

€183.41 €230.37

-€9.80

ARLEN NESS Front Fender Relocation Brackets — 21" front, Black powder-coated

Relocates the front fender to prevent tire contact; jig-drilled for simple bolt-on installation.

€38.14 €47.94

-€15.14

DRAG SPECIALTIES [object Object]

Direct replacement for OEM kickstands — measurements refer to the center between foot and upper pivot centerline.

€42.78 €57.92

-€15.14

DRAG SPECIALTIES [object Object]

Direct-fit replacement kickstand. Suitable for lowered suspension when listed. Measurements refer to the center section between foot and upper pivot centerline.

€42.78 €57.92

Talon Front Fender — 21", E-coating, Black

-€85.47

PAUL YAFFE BAGGER NATION Talon Front Fender — 21", E-coating, Black

Radically styled front fender with a swooping claw-like shape. Pre-drilled for installation; satin-finish spacer included. Made in the USA.

€332.35 €417.82

Thicky Front Fender — 21" wheel, natural finish

-€85.47

PAUL YAFFE BAGGER NATION Thicky Front Fender — 21" wheel, natural finish

Redesigned lengthened front fender with squared ends and thicker sidewalls. One-piece 14-gauge metal construction, pre-drilled and direct bolt-on replacement. Includes satin spacers; arrives ready for scuff, prime and paint. Made in USA.

€332.35 €417.82

Custom Dresser Front Fender — 109 cm (43"), 21" wheel, 14 cm (5-1/2") wide, LS-2, Unfinished

-€72.90

RUSS WERNIMONT DESIGNS Custom Dresser Front Fender — 109 cm (43"), 21" wheel, 14 cm...

Handmade 14-gauge stamped steel front fender for Custom Dresser models. Inspected individually and pre-drilled for easy installation.

€206.05 €278.95

Custom Dresser Front Fender — 55" contour, 30" wheel, 6.5" width, LS-2, Unfinished

-€103.07

RUSS WERNIMONT DESIGNS Custom Dresser Front Fender — 55" contour, 30" wheel, 6.5"...

14-gauge stamped steel front fender, inspected for straightness and finish. Pre-drilled for easy installation. Available in LS-2, LS-3 and OCF styles. Handmade in the USA.

€400.88 €503.95

-€4.57

DRAG SPECIALTIES [object Object]

Increases kickstand surface for easier operation. Includes mounting hardware; drilling required.

€12.92 €17.49

-€7.04

DRAG SPECIALTIES [object Object]

Kickstand extension that increases foot surface for easier deployment and greater stability. Includes mounting hardware; drilling required.

€19.91 €26.95

-€9.07

ARLEN NESS [object Object]

Billet aluminum kickstand extension tab that installs over the factory kickstand tab to improve access when using extended floorboards.

€35.26 €44.33

-€60.72

DRAG SPECIALTIES [object Object]

Bolt-on center stand lifts the bike upright for easier cleaning and servicing, saves parking space and features adjustable feet to raise the rear tire. Not compatible with models using adjustable passenger floorboard mount kit OEM# 50768-07.

€171.63 €232.35

-€9.46

SW-MOTECH [object Object]

Increases side stand stability with a large, bike-specific contact plate; CNC-milled aluminum with corrosion‑resistant stainless steel fasteners.

€36.76 €46.22

Thicky Front Fender — 21" wheel, front mount, Natural

-€85.47

PAUL YAFFE BAGGER NATION Thicky Front Fender — 21" wheel, front mount, Natural

Lengthened one-piece front fender with squared ends and thicker sidewalls; pre-drilled and direct bolt-on. Arrives raw for primer and paint; includes satin spacers or optional black/chrome upgrades.

€332.35 €417.82

-€42.97

SW-MOTECH [object Object]

Robust steel centerstand with lightweight tube construction, high ground clearance and improved corrosion resistance. Includes mounting instructions and hardware.

€167.11 €210.08

-€12.29

DYNOJET-HARLEY [object Object]

Durable 6061-T6 aluminum guard that protects the side stand switch. Hardware included. Made in the U.S.A.

€47.82 €60.11

-€25.08

PAUL YAFFE BAGGER NATION [object Object]

Quick-install angle block that fixes kickstand digging and non-locking, increases lean angle, and protects the spring. Hardware and instructions included.

€97.55 €122.63

Hugger Series Front Fender — 19" wheel, 41-7/8" contour, Black

-€75.46

KLOCK WERKS Hugger Series Front Fender — 19" wheel, 41-7/8" contour, Black

Stamped front fender that adds rigidity like a fork brace. Pre-drilled and e-coated for corrosion resistance. Requires Klock Werks Tire Hugger mounting blocks (sold separately).

€293.45 €368.91

-€18.62

DRAG SPECIALTIES [object Object]

High-strength steel kickstand that replaces OEM units; under-stock length fits lowered suspension. Measured for Big Twin, Softail, FLT and XL from the first top bend to the first bottom bend.

€52.63 €71.25

-€18.62

DRAG SPECIALTIES [object Object]

High-strength steel kickstand that replaces OEM units; under-stock lengths available for lowered suspension. Measured first bend to first bend for Big Twin, Softail, FLT and XL.

€52.63 €71.25

-€1.43

DRAG SPECIALTIES [object Object]

Replacement kickstand spring. Springs are measured from hook to hook.

€4.05 €5.48

-€42.97

SW-MOTECH [object Object]

Durable steel centerstand with high ground clearance, easy mounting, optimal leverage and superior corrosion resistance. Includes mounting material and instructions. German Vehicle Type Approval available.

€167.11 €210.08

-€22.07

DRAG SPECIALTIES Chrome Kickstand Kit — Stock length, Chrome

Complete kickstand kit with mount, kickstand, spring and hardware; mounting repair parts sold separately.

€62.39 €84.46

Kickstand Spring — 94.0 mm (3.7"), Chrome

-€1.26

DRAG SPECIALTIES Kickstand Spring — 94.0 mm (3.7"), Chrome

Replacement kickstand spring. Springs are measured from hook to hook. Easy to install with basic hand tools.

€3.57 €4.83

$Kickstand Spring — 99.1 mm (3.9\"), Chrome$

-€1.18

DRAG SPECIALTIES Kickstand Spring — 99.1 mm (3.9\"), Chrome

Replacement kickstand spring. Springs are measured from hook to hook.

€3.34 €4.52

-€12.97

DRAG SPECIALTIES Kickstand — 178 mm (7"), shortens 25.4 mm (1"), Chrome

Direct replacement designed for lowered bikes; measured to OEM bend points for precise fitment.

€36.66 €49.63

-€15.54

DRAG SPECIALTIES Kickstand — 210 mm, Chrome

High-strength construction replacement kickstand; replaces OEM units exactly. Under-stock lengths available for lowered suspension. Measured from the first bend for Big Twin, Softail, FLT and XL.

€43.92 €59.46

-€29.00

DRAG SPECIALTIES 6" Front Fender — 6" width, front mount, unfinished

Raw stamped steel front fender measuring approximately 6" W (inside). Mounts with OE hardware. Fenders with trim holes require a lower fender skirt. Sold each.

€81.98 €110.98

-€26.23

DRAG SPECIALTIES 6" Front Fender — 15.24 cm (6"), Unfinished

Raw stamped steel front fender; measures approximately 6" W (inside). Mounts with OE hardware. Fenders with trim holes require a lower fender skirt.

€74.14 €100.37

shop by category

Body & Frame

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Contact us

Products

Our company

shop by category

Body & Frame  

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Body & Frame