Body & Frame (5)

-€16.54
Out of Stock

ARLEN NESS Vented Gas Cap — CNC billet aluminum, Chrome

Precision-machined cap with exclusive ratchet design for consistent torque and a secure fit.

€64.32 €80.86

-€17.29
Out of Stock

DRAG SPECIALTIES [object Object]

High-strength steel kickstand — direct OEM replacement. Under-stock lengths available for lowered suspension. Measured from the first bend to the first bend on Big Twin, Softail, FLT and XL.

€48.89 €66.18

Tire Hugger Series Front Fenders for Dressers — 6.5" width, 26" wheel

-€83.00
Out of Stock

KLOCK WERKS Tire Hugger Series Front Fenders for Dressers — 6.5" width,...

Durable steel front fender for dressers, pre-drilled and e-coated to resist rust; includes zinc-plated mounting hardware.

€322.80 €405.80

-€9.88
Out of Stock

ARLEN NESS [object Object]

Extension that increases stock kickstand reach to clear custom floorboards. CNC-machined 6061 aluminum with dual setscrew fasteners.

€38.44 €48.32

Tire Hugger Series Front Fenders for Dressers — 6.5" width, fits 23" wheel, Black, E-Coating

-€100.62
Out of Stock

KLOCK WERKS Tire Hugger Series Front Fenders for Dressers — 6.5" width,...

Heavy-gauge steel front fenders for Dressers — pre-drilled and stamped, e-coated, includes zinc-plated mounting hardware, made in USA.

€391.28 €491.90

-€16.37
Out of Stock

PERFORMANCE MACHINE (PM) Fuel Door — Apex, Black

Adds a custom look to your tank with billet aluminum construction and made in the USA.

€73.66 €90.03

-€7.52
Out of Stock

DRAG SPECIALTIES [object Object]

Improves reach and leverage for hard-to-reach kickstands. Includes mounting hardware; drilling required.

€21.27 €28.79

Flush-Mount Gas Cap — Right-hand thread, Chrome

-€17.15
Out of Stock

KURYAKYN Flush-Mount Gas Cap — Right-hand thread, Chrome

Low-profile flush-mount gas cap that screws into stock openings for screw-in tanks '83 and later; keyed entry and chip-resistant outer rings.

€66.69 €83.84

-€15.52
Out of Stock

DRAG SPECIALTIES [object Object]

Direct-fit replacement kickstand; measurements specified from the foot to the upper pivot center. Shorter versions suit lowered suspension.

€43.85 €59.37

Tire Hugger Series Front Fenders for Dressers — 6.5" width, 26" wheel, raked frame fit, Black

-€100.62
Out of Stock

KLOCK WERKS Tire Hugger Series Front Fenders for Dressers — 6.5" width,...

Steel Tire Hugger front fenders for Dressers — pre-drilled and stamped, E-coated, includes zinc-plated mounting hardware. Made in the U.S.A.

€391.28 €491.90

-€15.52
Out of Stock

DRAG SPECIALTIES [object Object]

Direct OEM-fit replacement kickstand. Under-stock lengths suit lowered suspension. Measurements refer to the center portion between the foot and the upper pivot centerline.

€43.85 €59.37

Tire Hugger Series Front Fenders for Dressers — 6.5" width, 26" wheel, raked frame, Black

-€100.62
Out of Stock

KLOCK WERKS Tire Hugger Series Front Fenders for Dressers — 6.5" width,...

Thick stamped steel front fenders — pre-drilled, e-coated to resist rust, 6.5" outside width. Includes zinc-plated mounting hardware. Made in the U.S.A.

€391.28 €491.90

-€17.23
Out of Stock

DRAG SPECIALTIES [object Object]

Direct-replacement kickstand. Under-stock length versions available for lowered suspension. Measurements refer to the center portion between the foot and upper pivot centerline.

€48.67 €65.90

-€17.83
Out of Stock

PERFORMANCE MACHINE (PM) Custom Gas Cap — Screw On, Vented, Black

CNC-machined vented screw-in gas cap, made in the USA.

€69.19 €87.02

-€17.23
Out of Stock

DRAG SPECIALTIES [object Object]

Direct-fit replacement kickstand. Suitable for lowered suspension when selecting under-stock lengths. Measurements refer to the center section between the foot and the upper pivot centerline.

€48.67 €65.90

-€17.83
Out of Stock

PERFORMANCE MACHINE (PM) Custom Gas Cap — Apex, Screw On, Chrome

Precision CNC-machined vented screw-in fuel cap. Made in the USA.

€69.19 €87.02

-€85.47
Out of Stock

PAUL YAFFE BAGGER NATION DEI Front Fender — 21", steel, e-coated

Modern redesign of the classic Yaffe fender
Lengthened front and rear, thicker sidewalls
Single-piece 14-gauge steel, no welds
Pre-drilled; satin and black adapters included
E-coated finish; made in the USA

€332.35 €417.82

-€17.83
Out of Stock

PERFORMANCE MACHINE (PM) Custom Gas Cap — Black Ops™, screw-on, vented

CNC machined aircraft-grade aluminum; vented screw-in design; made in the USA.

€69.19 €87.02

-€15.14
Out of Stock

DRAG SPECIALTIES [object Object]

Direct-fit replacement kickstand. Suitable for lowered suspension when listed. Measurements refer to the center section between foot and upper pivot centerline.

€42.78 €57.92

$DEI Front Fender — 23\", steel, E-Coating$

-€96.44
Out of Stock

PAUL YAFFE BAGGER NATION DEI Front Fender — 23\", steel, E-Coating

Redesigned Yaffe-style front fender with extended coverage, pre-drilled mounting, and satin and black adapters included.

€375.06 €471.50

-€17.83
Out of Stock

PERFORMANCE MACHINE (PM) Custom Gas Cap — Array, Screw On, Black

Precision cnc-machined vented screw-in gas cap. Made in the United States.

€69.19 €87.02

-€17.23
Out of Stock

DRAG SPECIALTIES [object Object]

Replaces OEM kickstands perfectly. Under-stock length kickstands are for bikes with lowered suspension. Measurements are taken from the center portion between the foot and the centerline of the upper pivot.

€48.67 €65.90

-€96.44
Out of Stock

PAUL YAFFE BAGGER NATION DEI Front Fender — 26", E-coating

Complete redesign of the classic Yaffe front fender; lengthened front and rear, thickened sidewalls, 14-gauge steel, pre-drilled, e-coated finish; includes satin and black adapters.

€375.06 €471.50

-€17.83
Out of Stock

PERFORMANCE MACHINE (PM) Custom Gas Cap — Screw-on, vented, chrome

Precision CNC-machined vented screw-in gas cap, durable finish and made in the USA.

€69.19 €87.02

-€17.23
Out of Stock

DRAG SPECIALTIES [object Object]

Direct-fit replacement kickstand. Suitable for lowered suspension when under-stock length is required. Measurements refer to the center portion between the foot and the upper pivot centerline.

€48.67 €65.90

-€20.27
Out of Stock

PERFORMANCE MACHINE (PM) Custom Gas Cap — Black Ops™, vented, screw-on

CNC machined aircraft‑grade aluminum, vented screw‑in cap. Made in the USA.

€78.78 €99.05

-€17.23
Out of Stock

DRAG SPECIALTIES [object Object]

Direct-fit replacement kickstand. Under-stock length available for lowered suspension. Measurements refer to the center section between the foot and the upper pivot centerline.

€48.67 €65.90

-€96.44
Out of Stock

PAUL YAFFE BAGGER NATION Talon Front Fender — 26" wheel, raw finish

Radical claw-shaped front fender in 14-gauge steel with e-coated protection. Pre-drilled for easy installation; satin-finish spacer included. Made in the USA.

€375.06 €471.50

-€17.23
Out of Stock

DRAG SPECIALTIES [object Object]

Direct OEM replacement kickstand; under-stock length fits lowered suspension. Measurements refer to the center portion between the foot and the upper pivot centerline.

€48.67 €65.90

-€17.83
Out of Stock

PERFORMANCE MACHINE (PM) Custom Gas Cap — Vented, Screw On, Chrome

Precision CNC machining for a reliable fit. Vented screw-in design for proper tank ventilation. Made in the USA.

€69.19 €87.02

shop by category

Body & Frame

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Contact us

Products

Our company

shop by category

Body & Frame  

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Body & Frame