Body & Frame (5)

-€3.01

DRAG SPECIALTIES Petcock Adapter — 22 mm outlet, Black, Chrome

Allows use of a 22 mm petcock in tanks designed for Delphi fuel injection. Includes O-ring for a leak-proof seal. Fits petcocks that install with a 22 mm nut.

€8.51 €11.52

Tank Fitting Kit for Fuel Injection to Carburetor Conversion — 22 mm outlet, silver

-€16.85

PINGEL Tank Fitting Kit for Fuel Injection to Carburetor Conversion —...

Replaces factory tank fittings to allow use of a high-flow fuel valve when converting from fuel injection to a carburetor. Made in the USA.

€65.51 €82.36

Custom Dresser Front Fender — 109 cm (43"), 21" wheel, 14 cm (5-1/2") wide, LS-2, Unfinished

-€72.90

RUSS WERNIMONT DESIGNS Custom Dresser Front Fender — 109 cm (43"), 21" wheel, 14 cm...

Handmade 14-gauge stamped steel front fender for Custom Dresser models. Inspected individually and pre-drilled for easy installation.

€206.05 €278.95

Custom Dresser Front Fender — 55" contour, 30" wheel, 6.5" width, LS-2, Unfinished

-€103.07

RUSS WERNIMONT DESIGNS Custom Dresser Front Fender — 55" contour, 30" wheel, 6.5"...

14-gauge stamped steel front fender, inspected for straightness and finish. Pre-drilled for easy installation. Available in LS-2, LS-3 and OCF styles. Handmade in the USA.

€400.88 €503.95

-€4.70

PINGEL Petcock Bung — 22 mm outlet, stainless steel, gray

Weld-on petcock bung for custom or repaired fuel tanks. Made in the USA.

€18.27 €22.97

-€4.57

DRAG SPECIALTIES [object Object]

Increases kickstand surface for easier operation. Includes mounting hardware; drilling required.

€12.92 €17.49

-€7.04

DRAG SPECIALTIES [object Object]

Kickstand extension that increases foot surface for easier deployment and greater stability. Includes mounting hardware; drilling required.

€19.91 €26.95

Chopper Fuel Valve — 2" L x 1-1/2" H x 1-3/8" D, 3/8" NPT outlet, 5/16" hose, Chrome

-€52.33

PINGEL Chopper Fuel Valve — 2" L x 1-1/2" H x 1-3/8" D, 3/8" NPT...

Compact billet-brass fuel valve for high-mounted custom tanks; on/off/reserve selector, rear mounting, polished chrome finish.

€203.45 €255.78

-€9.07

ARLEN NESS [object Object]

Billet aluminum kickstand extension tab that installs over the factory kickstand tab to improve access when using extended floorboards.

€35.26 €44.33

-€60.72

DRAG SPECIALTIES [object Object]

Bolt-on center stand lifts the bike upright for easier cleaning and servicing, saves parking space and features adjustable feet to raise the rear tire. Not compatible with models using adjustable passenger floorboard mount kit OEM# 50768-07.

€171.63 €232.35

-€9.46

SW-MOTECH [object Object]

Increases side stand stability with a large, bike-specific contact plate; CNC-milled aluminum with corrosion‑resistant stainless steel fasteners.

€36.76 €46.22

Thicky Front Fender — 21" wheel, front mount, Natural

-€85.47

PAUL YAFFE BAGGER NATION Thicky Front Fender — 21" wheel, front mount, Natural

Lengthened one-piece front fender with squared ends and thicker sidewalls; pre-drilled and direct bolt-on. Arrives raw for primer and paint; includes satin spacers or optional black/chrome upgrades.

€332.35 €417.82

-€42.97

SW-MOTECH [object Object]

Robust steel centerstand with lightweight tube construction, high ground clearance and improved corrosion resistance. Includes mounting instructions and hardware.

€167.11 €210.08

-€12.29

DYNOJET-HARLEY [object Object]

Durable 6061-T6 aluminum guard that protects the side stand switch. Hardware included. Made in the U.S.A.

€47.82 €60.11

-€25.08

PAUL YAFFE BAGGER NATION [object Object]

Quick-install angle block that fixes kickstand digging and non-locking, increases lean angle, and protects the spring. Hardware and instructions included.

€97.55 €122.63

Hugger Series Front Fender — 19" wheel, 41-7/8" contour, Black

-€75.46

KLOCK WERKS Hugger Series Front Fender — 19" wheel, 41-7/8" contour, Black

Stamped front fender that adds rigidity like a fork brace. Pre-drilled and e-coated for corrosion resistance. Requires Klock Werks Tire Hugger mounting blocks (sold separately).

€293.45 €368.91

Fuel Valve Petcock — 22 mm outlet, 7.9 mm (5/16") hose barb, Chrome

-€26.86

SPYKE Fuel Valve Petcock — 22 mm outlet, 7.9 mm (5/16") hose barb,...

High-flow petcock with 360° swivel and audible detent for precise positioning. Fits stock and custom tanks; easy installation and reliable performance.

€104.48 €131.34

-€18.62

DRAG SPECIALTIES [object Object]

High-strength steel kickstand that replaces OEM units; under-stock length fits lowered suspension. Measured for Big Twin, Softail, FLT and XL from the first top bend to the first bottom bend.

€52.63 €71.25

-€18.62

DRAG SPECIALTIES [object Object]

High-strength steel kickstand that replaces OEM units; under-stock lengths available for lowered suspension. Measured first bend to first bend for Big Twin, Softail, FLT and XL.

€52.63 €71.25

Tank Fitting Kit for Fuel Injection to Carburetor Conversion — 1/4" NPT, Silver

-€50.03

PINGEL Tank Fitting Kit for Fuel Injection to Carburetor Conversion —...

Replaces factory tank fittings so a carburetor can be supplied with adequate fuel on large-displacement engines. Designed for use with a Pingel fuel valve; made in the USA.

€62.88 €112.91

Power-Flo Fuel Valve — 1/4" NPT, 5/16" hose barb, polished aluminum

-€28.95

PINGEL Power-Flo Fuel Valve — 1/4" NPT, 5/16" hose barb, polished...

Universal-fit fuel valve with reversible hose barb orientation and dependable on/reserve/off control. Made in the USA.

€112.58 €141.53

-€42.97

SW-MOTECH [object Object]

Durable steel centerstand with high ground clearance, easy mounting, optimal leverage and superior corrosion resistance. Includes mounting material and instructions. German Vehicle Type Approval available.

€167.11 €210.08

-€22.07

DRAG SPECIALTIES Chrome Kickstand Kit — Stock length, Chrome

Complete kickstand kit with mount, kickstand, spring and hardware; mounting repair parts sold separately.

€62.39 €84.46

Kickstand Spring — 94.0 mm (3.7"), Chrome

-€1.26

DRAG SPECIALTIES Kickstand Spring — 94.0 mm (3.7"), Chrome

Replacement kickstand spring. Springs are measured from hook to hook. Easy to install with basic hand tools.

€3.57 €4.83

$Kickstand Spring — 99.1 mm (3.9\"), Chrome$

-€1.18

DRAG SPECIALTIES Kickstand Spring — 99.1 mm (3.9\"), Chrome

Replacement kickstand spring. Springs are measured from hook to hook.

€3.34 €4.52

-€6.21

MOTION PRO Fuel Valve — 1/4" NPT outlet, 6.4 mm (1/4") hose barb

Inline fuel valve with 1/4" NPT thread and 1/4" hose barb. Steel construction with zinc plating and Viton® O-ring.

€17.53 €23.74

-€12.97

DRAG SPECIALTIES Kickstand — 178 mm (7"), shortens 25.4 mm (1"), Chrome

Direct replacement designed for lowered bikes; measured to OEM bend points for precise fitment.

€36.66 €49.63

-€29.00

DRAG SPECIALTIES 6" Front Fender — 6" width, front mount, unfinished

Raw stamped steel front fender measuring approximately 6" W (inside). Mounts with OE hardware. Fenders with trim holes require a lower fender skirt. Sold each.

€81.98 €110.98

-€26.23

DRAG SPECIALTIES 6" Front Fender — 15.24 cm (6"), Unfinished

Raw stamped steel front fender; measures approximately 6" W (inside). Mounts with OE hardware. Fenders with trim holes require a lower fender skirt.

€74.14 €100.37

-€4.41

EMGO British-Style Fuel Petcock — 1/4" BSP outlet, downward

Faithful British-style On/Off petcock; threads into standard tank fittings, includes lock nut and pickup tube.

€12.44 €16.85

shop by category

Body & Frame

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Contact us

Products

Our company

shop by category

Body & Frame  

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Body & Frame