Body & Frame (5)

Benchmark Front Fender for Dresser — 6-1/2" fender, 23" wheel fit, raked frame, black e-coat

-€92.13

KLOCK WERKS Benchmark Front Fender for Dresser — 6-1/2" fender, 23" wheel...

Stamped 14-gauge U.S. steel front fender for Dresser. Treated to resist rust, includes chrome mounting blocks. Made in the U.S.A.

€358.31 €450.44

Tire Hugger Series Front Fenders for Dressers — 6.5" width, 23" wheel, raked frame, black

-€92.13

KLOCK WERKS Tire Hugger Series Front Fenders for Dressers — 6.5" width,...

Thick, pre-drilled stamped front fenders that add rigidity and accept customization. Includes zinc-plated mounting hardware. Made in the U.S.A.

€358.31 €450.44

Miniature Thermal Switch — 12V, 180°F, NPT 1/8"

-€5.69

JAGG OIL COOLERS Miniature Thermal Switch — 12V, 180°F, NPT 1/8"

Compact automatic thermal switch. Normally open; activates 12V accessories at preset temperature. NPT 1/8" probe, easy wire connections, made in USA.

€22.14 €27.83

-€46.96

ARLEN NESS Bagger-Tail Rear Fender Kit — ARLEN NESS, Rear, 06-479

Extended composite rear fender kit fills gap between fender and saddlebags; fits up to 200 mm rear tire; primed and ready to paint.

€183.41 €230.37

-€9.80

ARLEN NESS Front Fender Relocation Brackets — 21" front, Black powder-coated

Relocates the front fender to prevent tire contact; jig-drilled for simple bolt-on installation.

€38.14 €47.94

-€15.14

DRAG SPECIALTIES [object Object]

Direct replacement for OEM kickstands — measurements refer to the center between foot and upper pivot centerline.

€42.78 €57.92

Talon Front Fender — 21", E-coating, Black

-€85.47

PAUL YAFFE BAGGER NATION Talon Front Fender — 21", E-coating, Black

Radically styled front fender with a swooping claw-like shape. Pre-drilled for installation; satin-finish spacer included. Made in the USA.

€332.35 €417.82

Thicky Front Fender — 21" wheel, natural finish

-€85.47

PAUL YAFFE BAGGER NATION Thicky Front Fender — 21" wheel, natural finish

Redesigned lengthened front fender with squared ends and thicker sidewalls. One-piece 14-gauge metal construction, pre-drilled and direct bolt-on replacement. Includes satin spacers; arrives ready for scuff, prime and paint. Made in USA.

€332.35 €417.82

Oil Cooler Fan — THUNDERMAX EA7000, Black

-€66.20

THUNDERMAX Oil Cooler Fan — THUNDERMAX EA7000, Black

Reduces oil temperatures using engine temperature and vehicle speed. Quick 15-minute install; no oil cooler removal. Plug-n-play on M8 models with compatible ECM. Made in the USA.

€257.47 €323.67

Custom Dresser Front Fender — 109 cm (43"), 21" wheel, 14 cm (5-1/2") wide, LS-2, Unfinished

-€72.90

RUSS WERNIMONT DESIGNS Custom Dresser Front Fender — 109 cm (43"), 21" wheel, 14 cm...

Handmade 14-gauge stamped steel front fender for Custom Dresser models. Inspected individually and pre-drilled for easy installation.

€206.05 €278.95

Custom Dresser Front Fender — 55" contour, 30" wheel, 6.5" width, LS-2, Unfinished

-€103.07

RUSS WERNIMONT DESIGNS Custom Dresser Front Fender — 55" contour, 30" wheel, 6.5"...

14-gauge stamped steel front fender, inspected for straightness and finish. Pre-drilled for easy installation. Available in LS-2, LS-3 and OCF styles. Handmade in the USA.

€400.88 €503.95

-€11.51

KLOCK WERKS Oil Cooler Guard — Black

Enhances the center of the oil cooler trim with a stylish guard. Easy to install and built in the USA.

€44.80 €56.31

-€11.51

KLOCK WERKS Oil Cooler Guard — Chrome

Dresses up the oil cooler area with matching vent‑screen material; easy to install. Made in the USA.

€44.80 €56.31

-€4.57

DRAG SPECIALTIES [object Object]

Increases kickstand surface for easier operation. Includes mounting hardware; drilling required.

€12.92 €17.49

-€7.04

DRAG SPECIALTIES [object Object]

Kickstand extension that increases foot surface for easier deployment and greater stability. Includes mounting hardware; drilling required.

€19.91 €26.95

-€11.51

KLOCK WERKS Oil Cooler Guard — Chrome

Finishes the oil cooler area, adds visual pop, easy to install, made in the USA.

€44.80 €56.31

-€9.07

ARLEN NESS [object Object]

Billet aluminum kickstand extension tab that installs over the factory kickstand tab to improve access when using extended floorboards.

€35.26 €44.33

-€60.72

DRAG SPECIALTIES [object Object]

Bolt-on center stand lifts the bike upright for easier cleaning and servicing, saves parking space and features adjustable feet to raise the rear tire. Not compatible with models using adjustable passenger floorboard mount kit OEM# 50768-07.

€171.63 €232.35

-€9.46

SW-MOTECH [object Object]

Increases side stand stability with a large, bike-specific contact plate; CNC-milled aluminum with corrosion‑resistant stainless steel fasteners.

€36.76 €46.22

Thicky Front Fender — 21" wheel, front mount, Natural

-€85.47

PAUL YAFFE BAGGER NATION Thicky Front Fender — 21" wheel, front mount, Natural

Lengthened one-piece front fender with squared ends and thicker sidewalls; pre-drilled and direct bolt-on. Arrives raw for primer and paint; includes satin spacers or optional black/chrome upgrades.

€332.35 €417.82

-€42.97

SW-MOTECH [object Object]

Robust steel centerstand with lightweight tube construction, high ground clearance and improved corrosion resistance. Includes mounting instructions and hardware.

€167.11 €210.08

-€12.29

DYNOJET-HARLEY [object Object]

Durable 6061-T6 aluminum guard that protects the side stand switch. Hardware included. Made in the U.S.A.

€47.82 €60.11

-€25.08

PAUL YAFFE BAGGER NATION [object Object]

Quick-install angle block that fixes kickstand digging and non-locking, increases lean angle, and protects the spring. Hardware and instructions included.

€97.55 €122.63

Hugger Series Front Fender — 19" wheel, 41-7/8" contour, Black

-€75.46

KLOCK WERKS Hugger Series Front Fender — 19" wheel, 41-7/8" contour, Black

Stamped front fender that adds rigidity like a fork brace. Pre-drilled and e-coated for corrosion resistance. Requires Klock Werks Tire Hugger mounting blocks (sold separately).

€293.45 €368.91

Vertical Frame-Mount Fan Assisted Oil Cooler Kit — 10-row, Black, Silver, Orange

-€123.31

JAGG OIL COOLERS Vertical Frame-Mount Fan Assisted Oil Cooler Kit — 10-row,...

High-efficiency vertical, frame-mounted oil cooler kit with automatic fan; ideal for low-speed and highway use. Includes fan, hose, hardware, thermal switch wiring harness, and filter adapter. Made in the USA.

€479.53 €602.84

-€10.05

S&S CYCLE Oil Control Valve — 310-1150, Black, Silver

Helps regulate oil flow to the cooler and heads. Durable billet aluminum construction, steel check ball retainer, easy to install. Made in the USA.

€39.08 €49.13

-€5.05

DRAG SPECIALTIES SEATS Oil Cooler Cover — 8" L x 2-1/4" W x 1-1/4" D, Slimline, Black

Quality black vinyl cover with hook-and-loop fasteners. Fits OEM and Jagg Slimline oil coolers. Dimensions: 8" L x 2-1/4" W x 1-1/4" D. Made in the USA.

€14.30 €19.35

-€2.22

JAGG OIL COOLERS Replacement Gasket Service Kit — JAGG OIL COOLERS, GK4600, Black

Service kit with replacement gasket for oil filter adapter; made in the USA.

€8.64 €10.86

$Stainless Steel Braided Hose — 6.4 mm (1/4\"), 91 cm (3'), Stainless steel$

-€5.26

DRAG SPECIALTIES Stainless Steel Braided Hose — 6.4 mm (1/4\"), 91 cm (3'),...

Suitable for oil and gas applications. Not for use with fuel over 10% alcohol. Inspect regularly and replace if worn.

€14.85 €20.11

-€5.53

DRAG SPECIALTIES Stainless Steel Braided Hose — 7.9 mm (5/16"), 91 cm (3')

Hose for oil and gas applications. Not for use with fuel over 10% alcohol.

€15.65 €21.18

shop by category

Body & Frame

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Contact us

Products

Our company

shop by category

Body & Frame  

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Body & Frame