Body & Frame (4)

Vented Gas Cap — 10 Gauge, Titanium anodized

-€18.08

ARLEN NESS Vented Gas Cap — 10 Gauge, Titanium anodized

Vented gas cap with ratchet-design for secure torque and easy installation.

€70.32 €88.40

-€16.54

ARLEN NESS Vented Gas Cap — Vented, Black anodized

Precision vented gas cap with CNC-machined construction and an exclusive ratchet for correct torque and alignment.

€64.32 €80.86

-€8.00

JAGG OIL COOLERS Thermostat Service Kit — Black

Complete kit of seals and components for quick thermostat service and maintenance. Made in the USA.

€31.13 €39.13

-€16.54

ARLEN NESS Vented Gas Cap — Black, 12-point

Precision CNC-machined vented gas cap with ratchet design for accurate torque and alignment.

€64.32 €80.86

Benchmark Front Fender for Dresser — 6-1/2" fender, 23" wheel fit, raked frame, black e-coat

-€92.13

KLOCK WERKS Benchmark Front Fender for Dresser — 6-1/2" fender, 23" wheel...

Stamped 14-gauge U.S. steel front fender for Dresser. Treated to resist rust, includes chrome mounting blocks. Made in the U.S.A.

€358.31 €450.44

-€16.54

ARLEN NESS Vented Gas Cap — 701-011, Chrome

Precision vented gas cap with an exclusive ratchet design for correct torque and alignment.

€64.32 €80.86

Tire Hugger Series Front Fenders for Dressers — 6.5" width, 23" wheel, raked frame, black

-€92.13

KLOCK WERKS Tire Hugger Series Front Fenders for Dressers — 6.5" width,...

Thick, pre-drilled stamped front fenders that add rigidity and accept customization. Includes zinc-plated mounting hardware. Made in the U.S.A.

€358.31 €450.44

Miniature Thermal Switch — 12V, 180°F, NPT 1/8"

-€5.69

JAGG OIL COOLERS Miniature Thermal Switch — 12V, 180°F, NPT 1/8"

Compact automatic thermal switch. Normally open; activates 12V accessories at preset temperature. NPT 1/8" probe, easy wire connections, made in USA.

€22.14 €27.83

-€6.02

CULT WERK Lockable Tank Cap — Black

Lockable tank cap for V-Rod, Night Rod Special, Muscle & Street rod models. Made of black plastic; includes 2 keys.

€34.81 €40.83

-€8.00

CULT WERK Tank Cap PopUp Ultraflat — 60 mm Ø, thread Ø 45 mm, fits...

Ultra-flat pop-up tank cap with right-hand thread and ventilation; fits most Harley‑Davidson tanks from 1996. Easy pop-up knurled screw, compact profile.

€46.17 €54.17

-€46.96

ARLEN NESS Bagger-Tail Rear Fender Kit — ARLEN NESS, Rear, 06-479

Extended composite rear fender kit fills gap between fender and saddlebags; fits up to 200 mm rear tire; primed and ready to paint.

€183.41 €230.37

-€9.80

ARLEN NESS Front Fender Relocation Brackets — 21" front, Black powder-coated

Relocates the front fender to prevent tire contact; jig-drilled for simple bolt-on installation.

€38.14 €47.94

Talon Front Fender — 21", E-coating, Black

-€85.47

PAUL YAFFE BAGGER NATION Talon Front Fender — 21", E-coating, Black

Radically styled front fender with a swooping claw-like shape. Pre-drilled for installation; satin-finish spacer included. Made in the USA.

€332.35 €417.82

Thicky Front Fender — 21" wheel, natural finish

-€85.47

PAUL YAFFE BAGGER NATION Thicky Front Fender — 21" wheel, natural finish

Redesigned lengthened front fender with squared ends and thicker sidewalls. One-piece 14-gauge metal construction, pre-drilled and direct bolt-on replacement. Includes satin spacers; arrives ready for scuff, prime and paint. Made in USA.

€332.35 €417.82

-€3.01

DRAG SPECIALTIES Petcock Adapter — 22 mm outlet, Black, Chrome

Allows use of a 22 mm petcock in tanks designed for Delphi fuel injection. Includes O-ring for a leak-proof seal. Fits petcocks that install with a 22 mm nut.

€8.51 €11.52

Tank Fitting Kit for Fuel Injection to Carburetor Conversion — 22 mm outlet, silver

-€16.85

PINGEL Tank Fitting Kit for Fuel Injection to Carburetor Conversion —...

Replaces factory tank fittings to allow use of a high-flow fuel valve when converting from fuel injection to a carburetor. Made in the USA.

€65.51 €82.36

Custom Dresser Front Fender — 109 cm (43"), 21" wheel, 14 cm (5-1/2") wide, LS-2, Unfinished

-€72.90

RUSS WERNIMONT DESIGNS Custom Dresser Front Fender — 109 cm (43"), 21" wheel, 14 cm...

Handmade 14-gauge stamped steel front fender for Custom Dresser models. Inspected individually and pre-drilled for easy installation.

€206.05 €278.95

Custom Dresser Front Fender — 55" contour, 30" wheel, 6.5" width, LS-2, Unfinished

-€103.07

RUSS WERNIMONT DESIGNS Custom Dresser Front Fender — 55" contour, 30" wheel, 6.5"...

14-gauge stamped steel front fender, inspected for straightness and finish. Pre-drilled for easy installation. Available in LS-2, LS-3 and OCF styles. Handmade in the USA.

€400.88 €503.95

-€11.51

KLOCK WERKS Oil Cooler Guard — Black

Enhances the center of the oil cooler trim with a stylish guard. Easy to install and built in the USA.

€44.80 €56.31

-€11.51

KLOCK WERKS Oil Cooler Guard — Chrome

Dresses up the oil cooler area with matching vent‑screen material; easy to install. Made in the USA.

€44.80 €56.31

-€4.70

PINGEL Petcock Bung — 22 mm outlet, stainless steel, gray

Weld-on petcock bung for custom or repaired fuel tanks. Made in the USA.

€18.27 €22.97

-€11.51

KLOCK WERKS Oil Cooler Guard — Chrome

Finishes the oil cooler area, adds visual pop, easy to install, made in the USA.

€44.80 €56.31

Chopper Fuel Valve — 2" L x 1-1/2" H x 1-3/8" D, 3/8" NPT outlet, 5/16" hose, Chrome

-€52.33

PINGEL Chopper Fuel Valve — 2" L x 1-1/2" H x 1-3/8" D, 3/8" NPT...

Compact billet-brass fuel valve for high-mounted custom tanks; on/off/reserve selector, rear mounting, polished chrome finish.

€203.45 €255.78

Thicky Front Fender — 21" wheel, front mount, Natural

-€85.47

PAUL YAFFE BAGGER NATION Thicky Front Fender — 21" wheel, front mount, Natural

Lengthened one-piece front fender with squared ends and thicker sidewalls; pre-drilled and direct bolt-on. Arrives raw for primer and paint; includes satin spacers or optional black/chrome upgrades.

€332.35 €417.82

-€2.96

DRAG SPECIALTIES Fuel Tank Outlet Plug — Chrome

Plugs fuel-tank outlets for tanks using a fuel-injection or petcock adapter; includes O‑ring seal.

€8.39 €11.35

Hugger Series Front Fender — 19" wheel, 41-7/8" contour, Black

-€75.46

KLOCK WERKS Hugger Series Front Fender — 19" wheel, 41-7/8" contour, Black

Stamped front fender that adds rigidity like a fork brace. Pre-drilled and e-coated for corrosion resistance. Requires Klock Werks Tire Hugger mounting blocks (sold separately).

€293.45 €368.91

Fuel Valve Petcock — 22 mm outlet, 7.9 mm (5/16") hose barb, Chrome

-€26.86

SPYKE Fuel Valve Petcock — 22 mm outlet, 7.9 mm (5/16") hose barb,...

High-flow petcock with 360° swivel and audible detent for precise positioning. Fits stock and custom tanks; easy installation and reliable performance.

€104.48 €131.34

Vertical Frame-Mount Fan Assisted Oil Cooler Kit — 10-row, Black, Silver, Orange

-€123.31

JAGG OIL COOLERS Vertical Frame-Mount Fan Assisted Oil Cooler Kit — 10-row,...

High-efficiency vertical, frame-mounted oil cooler kit with automatic fan; ideal for low-speed and highway use. Includes fan, hose, hardware, thermal switch wiring harness, and filter adapter. Made in the USA.

€479.53 €602.84

-€10.05

S&S CYCLE Oil Control Valve — 310-1150, Black, Silver

Helps regulate oil flow to the cooler and heads. Durable billet aluminum construction, steel check ball retainer, easy to install. Made in the USA.

€39.08 €49.13

-€5.05

DRAG SPECIALTIES SEATS Oil Cooler Cover — 8" L x 2-1/4" W x 1-1/4" D, Slimline, Black

Quality black vinyl cover with hook-and-loop fasteners. Fits OEM and Jagg Slimline oil coolers. Dimensions: 8" L x 2-1/4" W x 1-1/4" D. Made in the USA.

€14.30 €19.35

shop by category

Body & Frame

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Contact us

Products

Our company

shop by category

Body & Frame  

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Body & Frame