Body & Frame (4)

-€85.47
Out of Stock

PAUL YAFFE BAGGER NATION DEI Front Fender — 21", E-coated, Unfinished

Complete redesign of the classic Yaffe fender — one-piece 14-gauge steel, pre-drilled, E-coated. Satin and black adapters included.

€332.35 €417.82

-€6.89
Out of Stock

DRAG SPECIALTIES [object Object]

Low-profile extension that improves access to hard-to-reach kickstands; includes mounting hardware. Drilling required.

€19.49 €26.38

-€96.44
Out of Stock

PAUL YAFFE BAGGER NATION DEI Front Fender — 23", Unfinished

Redesigned DEI front fender: one-piece 14-gauge steel, pre-drilled, E-coated; satin and black adapters included. Made in USA.

€375.06 €471.50

-€6.89
Out of Stock

DRAG SPECIALTIES [object Object]

Extension plate that makes hard-to-reach kickstands easier to operate. Includes mounting hardware; drilling required.

€19.49 €26.38

-€96.44
Out of Stock

PAUL YAFFE BAGGER NATION DEI Front Fender — 26", unfinished, E-coating

Complete Yaffe redesign with lengthened front/rear, thickened sidewalls, single-piece 14-gauge construction; pre-drilled and includes satin and black adapters.

€375.06 €471.50

-€91.34
Out of Stock

PAUL YAFFE BAGGER NATION Talon Front Fender — 21" wheel, e-coating

Radically styled Talon front fender with pre-drilled mounting and included satin-finish spacer. Made in the USA.

€355.26 €446.60

Talon Front Fender — 23", black, e-coated

-€96.44
Out of Stock

PAUL YAFFE BAGGER NATION Talon Front Fender — 23", black, e-coated

Radical claw-shaped front fender; 14-gauge steel, pre-drilled for installation; e-coated finish; satin spacer included; made in USA.

€375.06 €471.50

-€62.24
Out of Stock

DRAG SPECIALTIES [object Object]

Lifts the motorcycle upright for easier cleaning and maintenance; bolt-on design preserves lean angle.

€175.92 €238.16

Talon Front Fender — 26" wheel, front, e-coating

-€96.44
Out of Stock

PAUL YAFFE BAGGER NATION Talon Front Fender — 26" wheel, front, e-coating

Radically styled front fender with 14-gauge steel construction, pre-drilled for installation, e-coated finish and satin-finish spacer included. Made in the USA.

€375.06 €471.50

-€96.44
Out of Stock

PAUL YAFFE BAGGER NATION Thicky Front Fender — 23", Natural

Redesigned one-piece 14-gauge steel front fender with squared ends and thicker sidewalls; pre-drilled, direct bolt-on, comes in natural finish with satin spacers included.

€375.06 €471.50

-€96.44
Out of Stock

PAUL YAFFE BAGGER NATION Thicky Front Fender — 26" wheel, front, natural finish

Lengthened, one-piece 14-gauge steel front fender with pre-drilled direct bolt-on fit; includes satin spacers and arrives ready for primer and paint.

€375.06 €471.50

-€21.39
Out of Stock

DRAG SPECIALTIES [object Object]

High-strength steel kickstand, 1" over stock length. Measurements denote the center portion between the foot and the upper pivot centerline.

€60.47 €81.86

Hugger Series Front Fender — Black, 19" fit, 40-3/8" contour

-€75.46
Out of Stock

KLOCK WERKS Hugger Series Front Fender — Black, 19" fit, 40-3/8" contour

Pre-drilled, stamped front fender that adds rigidity and can be trimmed for a kustom look. Protective coating resists corrosion. Requires separate Tire Hugger mounting blocks.

€293.45 €368.91

-€20.20
Out of Stock

DRAG SPECIALTIES [object Object]

High-strength steel kickstand with 1” over stock length. Measurements refer to the center portion between the foot and the centerline of the upper pivot.

€57.08 €77.28

-€21.39
Out of Stock

DRAG SPECIALTIES [object Object]

High-strength steel kickstand, 1" over stock length. Measurements refer to the center portion between the foot and the centerline of the upper pivot.

€60.47 €81.86

Hugger Series Front Fender — 19", 40-1/4" contour, 4-1/2" width, Black

-€75.46
Out of Stock

KLOCK WERKS Hugger Series Front Fender — 19", 40-1/4" contour, 4-1/2"...

Stamped steel front fender, pre-drilled and e-coated to resist corrosion. Made in the USA. Requires Klock Werks Tire Hugger mounting blocks (sold separately).

€293.45 €368.91

-€20.20
Out of Stock

DRAG SPECIALTIES [object Object]

High-strength steel kickstand, 1” over stock length. Measurements taken between the foot and the centerline of the upper pivot.

€57.08 €77.28

Hugger Series Front Fender — 19" wheel, 31" contour, Black

-€75.46
Out of Stock

KLOCK WERKS Hugger Series Front Fender — 19" wheel, 31" contour, Black

Thick, kustom-style front fender—pre-drilled and stamped for a consistent finish, e-coated to resist corrosion, made in the USA. Requires Klock Werks Tire Hugger mounting blocks (sold separately).

€293.45 €368.91

-€21.39
Out of Stock

DRAG SPECIALTIES Kickstand — Extended 25,4 mm (1")

High-strength steel kickstand with a 1" over stock length for enhanced support.

€60.47 €81.86

Hugger Series Front Fender — 21-7/8" contour, 4-1/2" width, 19" wheel, Black

-€75.46
Out of Stock

KLOCK WERKS Hugger Series Front Fender — 21-7/8" contour, 4-1/2" width,...

Stamped steel front fender that adds front-end rigidity, pre-drilled for consistent fit and e-coated to resist rust. Requires Klock Werks Tire Hugger mounting blocks (sold separately).

€293.45 €368.91

-€20.70
Out of Stock

DRAG SPECIALTIES [object Object]

High-strength steel kickstand, 1” over stock length. Measurements refer to the center portion between the foot and the centerline of the upper pivot.

€58.51 €79.21

-€22.00
Out of Stock

DRAG SPECIALTIES Kickstand — Extended 25,4 mm (1")

High-strength steel kickstand with 1” over stock length for added support.

€62.22 €84.22

Hugger Series Front Fender — 19" wheel, 26-3/8" contour

-€75.46
Out of Stock

KLOCK WERKS Hugger Series Front Fender — 19" wheel, 26-3/8" contour

Thick, rigid fender that can be trimmed for a custom look; pre-drilled and stamped; factory corrosion protection; made in USA. Mounting blocks required (sold separately).

€293.45 €368.91

-€21.39
Out of Stock

DRAG SPECIALTIES [object Object]

High-strength steel kickstand, 1" over stock length. Measurements refer to the center portion between the foot and the centerline of the upper pivot.

€60.47 €81.86

Hugger Series Front Fender with Mounting Blocks for Softail/Dyna — 19" wheel, 40-3/8" contour length, Black

-€103.01
Out of Stock

KLOCK WERKS Hugger Series Front Fender with Mounting Blocks for...

Stamped 14-gauge steel Hugger front fender with satin mounting blocks; laser-cut and pre-drilled for a precise fit on Softail/Dyna.

€400.63 €503.64

Hugger Series Front Fender with Mounting Blocks for Softail/Dyna — 19" wheel, 31" contour, Black E-coating

-€103.01
Out of Stock

KLOCK WERKS Hugger Series Front Fender with Mounting Blocks for...

Stamped 14-gauge steel front fender with 13-step e-coated finish; laser cut, pre-drilled, includes zinc-plated mounting hardware. Made in the USA.

€400.63 €503.64

-€84.09
Out of Stock

DRAG SPECIALTIES [object Object]

Center Stand lifts the motorcycle upright for easier cleaning and servicing. Adjustable feet allow the rear tire to be lifted; bolt-on design preserves lean angle. Compatible with OE and Profile rear suspension. Not for use with adjustable passenger floorboard mount kit OEM# 50768-07.

€237.66 €321.75

Hugger Series Front Fender with Mounting Blocks for Softail/Dyna — Front, 19" wheel, Black, E-coated

-€103.01
Out of Stock

KLOCK WERKS Hugger Series Front Fender with Mounting Blocks for...

Stamped 14-gauge steel front fender with 13-step E-coated finish. Laser cut and pre-drilled; includes zinc-plated mounting hardware. Made in the USA.

€400.63 €503.64

-€1.47
Out of Stock

DRAG SPECIALTIES [object Object]

Durable kickstand spring measured hook-to-hook for precise fit and reliable support.

€4.15 €5.62

Hugger Series Front Fender with Mounting Blocks for Softail/Dyna — 19" wheel, 26-3/8" contour, black

-€103.01
Out of Stock

KLOCK WERKS Hugger Series Front Fender with Mounting Blocks for...

Stamped steel front fender with E-coated finish, laser-cut and pre-drilled; includes zinc-plated mounting hardware. Fits Softail/Dyna.

€400.63 €503.64

shop by category

Body & Frame

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Contact us

Products

Our company

shop by category

Body & Frame  

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Body & Frame