Body & Frame (4)

Oil Hose Upgrade Kit — 91 cm (3'), stainless steel

-€15.41
Out of Stock

JAGG OIL COOLERS Oil Hose Upgrade Kit — 91 cm (3'), stainless steel

Braided performance oil hoses and easy-install finishers for a racy, track-ready upgrade. Includes hose separators and clamp-integrated finishers. Made in the USA.

€59.94 €75.35

One-Piece 2" Extended Gas Tank — 4.2 US gal, 22 mm outlet, Raw

-€104.79
Out of Stock

DRAG SPECIALTIES One-Piece 2" Extended Gas Tank — 4.2 US gal, 22 mm outlet, Raw

One-piece, bolt-on 2" extended gas tank. Approximately 4.2 gallons; accepts late-style 22 mm petcock. Seat nose may require modification; custom gauge mounting required.

€296.17 €400.96

OEM Rear Fender — 18.5 cm (7-1/4") width, unfinished

-€31.07
Out of Stock

DRAG SPECIALTIES OEM Rear Fender — 18.5 cm (7-1/4") width, unfinished

Direct OEM replacement rear fender; raw stamped-steel, pre-drilled to accept OE components and taillight assembly.

€87.80 €118.87

-€1.88
Out of Stock

DRAG SPECIALTIES Replacement Gas Tank Bung — Weld-In, Chrome

Weld-in bung for custom fuel-tank filler mounting; accepts '84-E'96 screw-in gas caps.

€5.32 €7.20

-€25.69
Out of Stock

DRAG SPECIALTIES FXR Rear Fender — Unfinished, steel

Raw steel rear fender, pre-drilled for OEM fender struts, license plate mounts and taillight.

€72.60 €98.29

-€6.94
Out of Stock

S&S CYCLE Oil Filter Fitting — Steel, Straight fitting

Compact connector for oil filter installation; provides reliable sealing and easy maintenance.

€19.66 €26.60

-€8.71
Out of Stock

DRAG SPECIALTIES Tank Trim — Chrome, Black, Bolt-On

Polished center panel for split tanks; replaces the stock center panel.

€24.65 €33.36

Oil Hose Upgrade Kit — 15 cm (6 in), Black

-€19.82
Out of Stock

JAGG OIL COOLERS Oil Hose Upgrade Kit — 15 cm (6 in), Black

Braided, track-ready oil hoses that deliver a racy look and simple installation; kit includes two hose separators and four hose finishers with clamps.

€77.03 €96.85

One-Piece Smooth-Top Style Extended Gas Tank — 22-1/2" L × 16" W, 15.1 L (4 US gal), Raw

-€85.48
Out of Stock

DRAG SPECIALTIES One-Piece Smooth-Top Style Extended Gas Tank — 22-1/2" L × 16"...

One-piece smooth-top extended gas tank that eliminates the dash and adds approximately 4 gallons of capacity. Includes necessary mounting hardware; '96-'99 require pre-'96 petcock.

€241.55 €327.03

Oil Hose Upgrade Kit — 15 cm (6") stainless steel

-€19.82
Out of Stock

JAGG OIL COOLERS Oil Hose Upgrade Kit — 15 cm (6") stainless steel

Enhances appearance and oil routing with an easy-install kit; includes hose separators and finishers with worm-drive clamps.

€77.03 €96.85

Screw-In Gas Cap — Vented, Early style, Chrome

-€4.64
Out of Stock

DRAG SPECIALTIES Screw-In Gas Cap — Vented, Early style, Chrome

Provides a screw-in closure with a provision for evaporative emissions control equipment to support reliable fuel system operation.

€13.13 €17.77

-€30.18
Out of Stock

DRAG SPECIALTIES Rear Fender — Unfinished steel

Predrilled rear fender for OEM fender struts and license plate mount; ships ready for custom finishing.

€85.30 €115.48

-€4.64
Out of Stock

DRAG SPECIALTIES Screw-In Gas Cap — Non-vented, Chrome

Screw-In Gas Cap with provision for evaporative emissions control equipment; screw-in installation provides a secure fuel-tank seal.

€13.13 €17.77

-€30.18
Out of Stock

DRAG SPECIALTIES Rear Fender — Unfinished steel

Pre-drilled for OEM fender struts and license plate mount. Ready for custom finishing.

€85.30 €115.48

-€7.36
Out of Stock

DRAG SPECIALTIES Chrome Oil Line — Chrome

OEM-style oil feed line that accepts all OEM connectors and retainers.

€20.81 €28.17

Gas Tank with Chrome Aero-Style Gas Cap — 3.3 gal (12.5 L), 22 mm outlet, chrome

-€85.48
Out of Stock

DRAG SPECIALTIES Gas Tank with Chrome Aero-Style Gas Cap — 3.3 gal (12.5 L), 22...

Rubber-mounted bolt-on flat-bottom tank with locking aero-style cap; ships unpainted and should be pressure tested and sealed before painting.

€241.55 €327.03

-€18.74
Out of Stock

DRAG SPECIALTIES Chrome Oil Line — Oil return line

OEM-style replacement; accepts all OEM connectors and retainers.

€52.98 €71.72

-€19.30
Out of Stock

DRAG SPECIALTIES Chrome Oil Line — Chrome

OEM-style replacement component that accepts all OEM connectors and retainers for a secure fit.

€54.55 €73.85

-€47.44
Out of Stock

DRAG SPECIALTIES Gas Tank — 3/8" NPT outlet, Carbureted, Raw

Durable replacement gas tank with reinforced seams, extra-strong mounting tabs and included hardware. Ships unpainted; caps not included.

€134.08 €181.52

WFB™ Benchmark Front Fender — 6-1/2" width, 26" wheel, Black, E-Coating

-€83.00
Out of Stock

KLOCK WERKS WFB™ Benchmark Front Fender — 6-1/2" width, 26" wheel, Black,...

Rivetless, pre-drilled front fender with an extended 1.5" rear tail; pairs with WFB™ rear fender. Made in USA.

€322.80 €405.80

-€15.64
Out of Stock

DRAG SPECIALTIES Chrome Oil Line — T03-0163

OEM-style replacement that accepts all OEM connectors and retainers for a direct fit.

€44.19 €59.83

-€1.03
Out of Stock

DRAG SPECIALTIES Oil Drain Elbow — Black, Rubber

Directs used oil cleanly into a drain pan to minimize spills during oil changes.

€2.91 €3.94

-€107.90
Out of Stock

PRO-ONE PERF.MFG. Oil Cooler Kit — For 1"-1-1/4" frame tubing, 305 mm (12"), Chrome

Complete oil cooler kit with AN #6 fittings, frame-mount clamps and reducers, CNC-machined billet aluminum construction.

€304.91 €412.81

-€50.25
Out of Stock

DRAG SPECIALTIES Gas Tank — 22 mm outlet, bolt-on mount, raw finish

Heavy-gauge construction with reinforced seams. Includes strong mounting tabs and hardware. Shipped unpainted; caps not included. Must be fitted, pressure-tested and sealed before painting.

€142.00 €192.25

Benchmark Front Fender for Dresser — 6-1/2" wide, fits 16–19" wheels, black e-coating

-€90.55
Out of Stock

KLOCK WERKS Benchmark Front Fender for Dresser — 6-1/2" wide, fits 16–19"...

Durable stamped steel front fender with e-coating and chrome mounting blocks. Adaptable for custom applications. Made in the U.S.A.

€352.15 €442.70

Hose Clamp — 3/8" (9.5 mm), 10-pack, Black

-€2.93
Out of Stock

JAGG OIL COOLERS Hose Clamp — 3/8" (9.5 mm), 10-pack, Black

Worm-drive clamp for secure, adjustable connections in custom oil cooler installations.

€11.36 €14.29

-€94.39
Out of Stock

PRO-ONE PERF.MFG. Oil Cooler Kit — For 1"–1-1/4" frame tubing, 305 mm (12")

Compact oil cooler kit with AN #6 fittings, supplied clamps and reducers, and precision-machined components for durable, easy installation.

€266.80 €361.19

Fat Bob-Style Gas Tank — 13.2 L (3.5 US gal), 22 mm outlet, Raw

-€63.90
Out of Stock

DRAG SPECIALTIES Fat Bob-Style Gas Tank — 13.2 L (3.5 US gal), 22 mm outlet, Raw

Fat Bob-style tank accepts stock dash and speedo equipment and fits standard late-model Harley petcocks.

€180.64 €244.54

-€71.96
Out of Stock

DRAG SPECIALTIES Fat Bob-Style Gas Tank — 18.9 L (5 US gal), 22 mm outlet, Raw

Classic Fat Bob styling with direct-fit compatibility for stock instrumentation and late-model Harley petcocks.

€203.38 €275.34

-€17.37
Out of Stock

KURYAKYN Oil Cooler Cover — Chrome

Bolt-on oil cooler cover installs like the stock factory cover. Durable, lightweight design for a refined appearance.

€67.56 €84.93

shop by category

Body & Frame

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Contact us

Products

Our company