Body & Frame (4)

S&S CYCLE Oil Control Valve — 310-1150, Black, Silver

Helps regulate oil flow to the cooler and heads. Durable billet aluminum construction, steel check ball retainer, easy to install. Made in the USA.

€37.83

DRAG SPECIALTIES SEATS Oil Cooler Cover — 8" L x 2-1/4" W x 1-1/4" D, Slimline, Black

Quality black vinyl cover with hook-and-loop fasteners. Fits OEM and Jagg Slimline oil coolers. Dimensions: 8" L x 2-1/4" W x 1-1/4" D. Made in the USA.

€13.84

JAGG OIL COOLERS Replacement Gasket Service Kit — JAGG OIL COOLERS, GK4600, Black

Service kit with replacement gasket for oil filter adapter; made in the USA.

€8.36

$Stainless Steel Braided Hose — 6.4 mm (1/4\"), 91 cm (3'), Stainless steel$

DRAG SPECIALTIES Stainless Steel Braided Hose — 6.4 mm (1/4\"), 91 cm (3'),...

Suitable for oil and gas applications. Not for use with fuel over 10% alcohol. Inspect regularly and replace if worn.

€14.38

DRAG SPECIALTIES Stainless Steel Braided Hose — 7.9 mm (5/16"), 91 cm (3')

Hose for oil and gas applications. Not for use with fuel over 10% alcohol.

€15.15

Stainless Steel Braided Hose — 9.5 mm (3/8"), 91 cm (3'), Fuel, Oil

DRAG SPECIALTIES Stainless Steel Braided Hose — 9.5 mm (3/8"), 91 cm (3'),...

Braided hose for oil and gas applications. Do not use with fuels over 10% alcohol.

€15.62

DRAG SPECIALTIES Stainless Steel Mini-Clamps — For 3/8" oil/fuel lines, 10 pack

Compact clamps for small-diameter hoses and tubing. Designed for use on oil and gas lines up to 3/8" in diameter. Made in the USA.

€15.84

DRAG SPECIALTIES 6" Front Fender — 6" width, front mount, unfinished

Raw stamped steel front fender measuring approximately 6" W (inside). Mounts with OE hardware. Fenders with trim holes require a lower fender skirt. Sold each.

€79.35

DRAG SPECIALTIES 6" Front Fender — 15.24 cm (6"), Unfinished

Raw stamped steel front fender; measures approximately 6" W (inside). Mounts with OE hardware. Fenders with trim holes require a lower fender skirt.

€71.76

DRAG SPECIALTIES Front Fender — Fits 19", 18", 17", 16" wheels, Unfinished

Smooth steel construction. Pre-drilled for mounting with existing hardware.

€71.76

GOODRIDGE Hose — Oil line, Chrome

Replacement hose for repair or upgrade.

€44.09

Custom Softail Front Fender — 21" wheel, 44-1/2" contour length, OCF, unfinished

RUSS WERNIMONT DESIGNS Custom Softail Front Fender — 21" wheel, 44-1/2" contour...

14-gauge steel, raw easy-to-paint finish, simple bolt-on installation. Fits LS-2 or OCF styles; made in the USA.

€277.17

RUSS WERNIMONT DESIGNS Custom Softail Front Fender — 21", 5-1/2" width, Unfinished

14-gauge steel front fender with raw, easy-to-paint finish. Direct bolt-on installation; fender spacers included. Available in LS-2 and OCF lower-edge styles.

€225.91

Custom Dresser Front Fender — 105 cm (41-1/4") contour, 19" wheel, unfinished

RUSS WERNIMONT DESIGNS Custom Dresser Front Fender — 105 cm (41-1/4") contour, 19"...

Handmade 14-gauge stamped steel front fender, pre-drilled for easy installation; LS-3 style.

€199.45

DRAG SPECIALTIES 6" Front Fender — 6" W, front mount

Raw stamped steel front fender measuring approximately 6" W (inside). Mounts with OE hardware. Fenders with trim holes require lower fender skirt.

€74.24

Custom Dresser Front Fender — 108 cm contour, 21" wheel fit, 14 cm width, Unfinished

RUSS WERNIMONT DESIGNS Custom Dresser Front Fender — 108 cm contour, 21" wheel fit,...

14-gauge stamped steel front fender, pre-drilled with raw spacer, handmade in the USA. Available in LS-2, LS-3 and OCF styles; finish-ready.

€214.03

RUSS WERNIMONT DESIGNS Custom Dresser Front Fender

Durable heavy-gauge steel construction with individual inspections for quality assurance.

€214.03

DRAG SPECIALTIES Front Fender — 19", 18", 17", 16"

Smooth profile, pre-drilled for quick installation. Durable and ready for finishing.

€77.14

DRAG SPECIALTIES 6" Front Fender — 7-1/4" inside mounting width, Unfinished

Stamped front fender; mounts with OE hardware. Use a lower fender skirt if trim holes are present.

€85.45

DRAG SPECIALTIES M-8 Softail/Dyna Glide Front Fender — 21", front, Unfinished

Direct-fit front fender with predrilled mounting holes and OEM-compatible brackets for straightforward installation.

€56.33

DRAG SPECIALTIES M-8 Softail/Dyna Glide Front Fender — 21", unfinished

Steel front fender, predrilled for easy installation; mounts with OEM hardware.

€55.42

DRAG SPECIALTIES Rear Fender — Unfinished, rear mount

Raw, unfinished rear fender predrilled for OEM fender struts and license plate mount.

€68.88

$XL Front Fender — 16\", 17\", unfinished$

DRAG SPECIALTIES XL Front Fender — 16\", 17\", unfinished

Steel front fender with a raw finish. Pre-drilled and mounts with OEM hardware for easy installation.

€45.39

Custom Dresser Front Fender — 49" contour length, 26" wheel, 6" width, LS-2, Unfinished

RUSS WERNIMONT DESIGNS Custom Dresser Front Fender — 49" contour length, 26" wheel,...

14-gauge stamped steel front fender, hand inspected and pre-drilled for easy installation. Available in LS and OCF styles. Length is contour length; measurements are approximate.

€267.93

Flat Back Dresser Front Fender — 55-3/4" contour, 30" wheel, 6-1/2" width, 19-1/4" height, 47° rake, Unfinished

RUSS WERNIMONT DESIGNS Flat Back Dresser Front Fender — 55-3/4" contour, 30" wheel,...

Heavy-gauge one-piece raw steel front fender, laser trimmed and ready to paint. Raw aluminum spacers included. Made in the U.S.A.

€419.62

Pro Short Front Fender — 15 cm (5.9"), 14.30 cm inside mount (5.63"), front mount, unfinished

ARLEN NESS Pro Short Front Fender — 15 cm (5.9"), 14.30 cm inside mount...

Performance-inspired one-piece steel short front fender with direct bolt-on fit and included hardware.

€271.26

Real Steel Rapper Front Fender — inside mount 5-3/4", contour length 41-3/8"

ARLEN NESS Real Steel Rapper Front Fender — inside mount 5-3/4", contour...

Curvaceous full-length profile that wraps the tire; stamped one-piece 14-gauge steel; direct bolt-on; includes black anodized billet brackets and installation hardware; made in the USA.

€283.59

Benchmark Rear Fender — 4" stretch, 7-1/8" inside mount, 14" height, black

KLOCK WERKS Benchmark Rear Fender — 4" stretch, 7-1/8" inside mount, 14"...

Stamped 14-gauge U.S. steel rear fender with E-coat, 4" stretched tail for a lower, flowing profile; retains stock mounts.

€390.20

RUSS WERNIMONT DESIGNS Rear Fender

This Rear Fender is made from 14-gauge steel, features pre-drilled fender mounting holes, and a direct bolt-on design for easy installation.

€402.96

Flat Back Dresser Front Fender — 42.5" contour, 8" width, 18" wheel, 30° rake, raw steel

RUSS WERNIMONT DESIGNS Flat Back Dresser Front Fender — 42.5" contour, 8" width, 18"...

Heavy-gauge one-piece raw steel front fender, laser trimmed and ready to paint. Includes raw aluminum spacers. Made in the U.S.A.

€422.84

shop by category

Body & Frame

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Contact us

Products

Our company