Body & Frame (4)

-€17.64

ARLEN NESS Vented Gas Cap — Anodized orange, CNC billet aluminum

Precision-machined vented fuel cap with an exclusive ratchet design for proper torque and alignment.

€68.60 €86.24

-€14.02

DRAG SPECIALTIES [object Object]

High-strength steel kickstand that replaces OEM units and suits bikes with lowered suspension. Measured from first bend to first bend for Big Twin, Softail, FLT and XL.

€39.64 €53.66

Vented Gas Cap — 10 Gauge, Titanium anodized

-€18.08

ARLEN NESS Vented Gas Cap — 10 Gauge, Titanium anodized

Vented gas cap with ratchet-design for secure torque and easy installation.

€70.32 €88.40

-€16.54

ARLEN NESS Vented Gas Cap — Vented, Black anodized

Precision vented gas cap with CNC-machined construction and an exclusive ratchet for correct torque and alignment.

€64.32 €80.86

-€17.29

DRAG SPECIALTIES [object Object]

High-strength steel kickstand — direct OEM replacement. Under-stock lengths available for lowered suspension. Measured from the first bend to the first bend on Big Twin, Softail, FLT and XL.

€48.89 €66.18

-€16.54

ARLEN NESS Vented Gas Cap — Black, 12-point

Precision CNC-machined vented gas cap with ratchet design for accurate torque and alignment.

€64.32 €80.86

-€17.48

DRAG SPECIALTIES [object Object]

High-strength steel kickstand that replaces OEM units and fits bikes with lowered suspension. Measured from the first bend at the top to the first bend at the bottom on Big Twin, Softail, FLT and XL kickstands.

€49.41 €66.89

-€16.54

ARLEN NESS Vented Gas Cap — 701-011, Chrome

Precision vented gas cap with an exclusive ratchet design for correct torque and alignment.

€64.32 €80.86

-€6.02

CULT WERK Lockable Tank Cap — Black

Lockable tank cap for V-Rod, Night Rod Special, Muscle & Street rod models. Made of black plastic; includes 2 keys.

€34.81 €40.83

-€8.00

CULT WERK Tank Cap PopUp Ultraflat — 60 mm Ø, thread Ø 45 mm, fits...

Ultra-flat pop-up tank cap with right-hand thread and ventilation; fits most Harley‑Davidson tanks from 1996. Easy pop-up knurled screw, compact profile.

€46.17 €54.17

-€15.14

DRAG SPECIALTIES [object Object]

Direct replacement for OEM kickstands — measurements refer to the center between foot and upper pivot centerline.

€42.78 €57.92

-€15.14

DRAG SPECIALTIES [object Object]

Direct-fit replacement kickstand. Suitable for lowered suspension when listed. Measurements refer to the center section between foot and upper pivot centerline.

€42.78 €57.92

-€3.01

DRAG SPECIALTIES Petcock Adapter — 22 mm outlet, Black, Chrome

Allows use of a 22 mm petcock in tanks designed for Delphi fuel injection. Includes O-ring for a leak-proof seal. Fits petcocks that install with a 22 mm nut.

€8.51 €11.52

Tank Fitting Kit for Fuel Injection to Carburetor Conversion — 22 mm outlet, silver

-€16.85

PINGEL Tank Fitting Kit for Fuel Injection to Carburetor Conversion —...

Replaces factory tank fittings to allow use of a high-flow fuel valve when converting from fuel injection to a carburetor. Made in the USA.

€65.51 €82.36

-€4.70

PINGEL Petcock Bung — 22 mm outlet, stainless steel, gray

Weld-on petcock bung for custom or repaired fuel tanks. Made in the USA.

€18.27 €22.97

-€4.57

DRAG SPECIALTIES [object Object]

Increases kickstand surface for easier operation. Includes mounting hardware; drilling required.

€12.92 €17.49

-€7.04

DRAG SPECIALTIES [object Object]

Kickstand extension that increases foot surface for easier deployment and greater stability. Includes mounting hardware; drilling required.

€19.91 €26.95

Chopper Fuel Valve — 2" L x 1-1/2" H x 1-3/8" D, 3/8" NPT outlet, 5/16" hose, Chrome

-€52.33

PINGEL Chopper Fuel Valve — 2" L x 1-1/2" H x 1-3/8" D, 3/8" NPT...

Compact billet-brass fuel valve for high-mounted custom tanks; on/off/reserve selector, rear mounting, polished chrome finish.

€203.45 €255.78

-€9.07

ARLEN NESS [object Object]

Billet aluminum kickstand extension tab that installs over the factory kickstand tab to improve access when using extended floorboards.

€35.26 €44.33

-€60.72

DRAG SPECIALTIES [object Object]

Bolt-on center stand lifts the bike upright for easier cleaning and servicing, saves parking space and features adjustable feet to raise the rear tire. Not compatible with models using adjustable passenger floorboard mount kit OEM# 50768-07.

€171.63 €232.35

-€9.46

SW-MOTECH [object Object]

Increases side stand stability with a large, bike-specific contact plate; CNC-milled aluminum with corrosion‑resistant stainless steel fasteners.

€36.76 €46.22

-€42.97

SW-MOTECH [object Object]

Robust steel centerstand with lightweight tube construction, high ground clearance and improved corrosion resistance. Includes mounting instructions and hardware.

€167.11 €210.08

-€2.96

DRAG SPECIALTIES Fuel Tank Outlet Plug — Chrome

Plugs fuel-tank outlets for tanks using a fuel-injection or petcock adapter; includes O‑ring seal.

€8.39 €11.35

-€12.29

DYNOJET-HARLEY [object Object]

Durable 6061-T6 aluminum guard that protects the side stand switch. Hardware included. Made in the U.S.A.

€47.82 €60.11

-€25.08

PAUL YAFFE BAGGER NATION [object Object]

Quick-install angle block that fixes kickstand digging and non-locking, increases lean angle, and protects the spring. Hardware and instructions included.

€97.55 €122.63

Fuel Valve Petcock — 22 mm outlet, 7.9 mm (5/16") hose barb, Chrome

-€26.86

SPYKE Fuel Valve Petcock — 22 mm outlet, 7.9 mm (5/16") hose barb,...

High-flow petcock with 360° swivel and audible detent for precise positioning. Fits stock and custom tanks; easy installation and reliable performance.

€104.48 €131.34

-€18.62

DRAG SPECIALTIES [object Object]

High-strength steel kickstand that replaces OEM units; under-stock length fits lowered suspension. Measured for Big Twin, Softail, FLT and XL from the first top bend to the first bottom bend.

€52.63 €71.25

-€18.62

DRAG SPECIALTIES [object Object]

High-strength steel kickstand that replaces OEM units; under-stock lengths available for lowered suspension. Measured first bend to first bend for Big Twin, Softail, FLT and XL.

€52.63 €71.25

Tank Fitting Kit for Fuel Injection to Carburetor Conversion — 1/4" NPT, Silver

-€50.03

PINGEL Tank Fitting Kit for Fuel Injection to Carburetor Conversion —...

Replaces factory tank fittings so a carburetor can be supplied with adequate fuel on large-displacement engines. Designed for use with a Pingel fuel valve; made in the USA.

€62.88 €112.91

Power-Flo Fuel Valve — 1/4" NPT, 5/16" hose barb, polished aluminum

-€28.95

PINGEL Power-Flo Fuel Valve — 1/4" NPT, 5/16" hose barb, polished...

Universal-fit fuel valve with reversible hose barb orientation and dependable on/reserve/off control. Made in the USA.

€112.58 €141.53

shop by category

Body & Frame

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Contact us

Products

Our company

shop by category

Body & Frame  

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Body & Frame