Body & Frame (4)

Miniature Thermal Switch — 12V, 180°F, NPT 1/8"

-€5.69

JAGG OIL COOLERS Miniature Thermal Switch — 12V, 180°F, NPT 1/8"

Compact automatic thermal switch. Normally open; activates 12V accessories at preset temperature. NPT 1/8" probe, easy wire connections, made in USA.

€22.14 €27.83

-€16.71

MOTION PRO Auxiliary Fuel Tank — 1.9 L (0.5 US gal)

Portable auxiliary tank for tuning or refilling; includes 4' of 1/4" fuel line and a 1/4" in-line barb. Holds about 2,000 cc (0.5 gal).

€47.24 €63.95

-€46.96

ARLEN NESS Bagger-Tail Rear Fender Kit — ARLEN NESS, Rear, 06-479

Extended composite rear fender kit fills gap between fender and saddlebags; fits up to 200 mm rear tire; primed and ready to paint.

€183.41 €230.37

-€9.80

ARLEN NESS Front Fender Relocation Brackets — 21" front, Black powder-coated

Relocates the front fender to prevent tire contact; jig-drilled for simple bolt-on installation.

€38.14 €47.94

Talon Front Fender — 21", E-coating, Black

-€85.47

PAUL YAFFE BAGGER NATION Talon Front Fender — 21", E-coating, Black

Radically styled front fender with a swooping claw-like shape. Pre-drilled for installation; satin-finish spacer included. Made in the USA.

€332.35 €417.82

Thicky Front Fender — 21" wheel, natural finish

-€85.47

PAUL YAFFE BAGGER NATION Thicky Front Fender — 21" wheel, natural finish

Redesigned lengthened front fender with squared ends and thicker sidewalls. One-piece 14-gauge metal construction, pre-drilled and direct bolt-on replacement. Includes satin spacers; arrives ready for scuff, prime and paint. Made in USA.

€332.35 €417.82

Custom Dresser Front Fender — 109 cm (43"), 21" wheel, 14 cm (5-1/2") wide, LS-2, Unfinished

-€72.90

RUSS WERNIMONT DESIGNS Custom Dresser Front Fender — 109 cm (43"), 21" wheel, 14 cm...

Handmade 14-gauge stamped steel front fender for Custom Dresser models. Inspected individually and pre-drilled for easy installation.

€206.05 €278.95

Custom Dresser Front Fender — 55" contour, 30" wheel, 6.5" width, LS-2, Unfinished

-€103.07

RUSS WERNIMONT DESIGNS Custom Dresser Front Fender — 55" contour, 30" wheel, 6.5"...

14-gauge stamped steel front fender, inspected for straightness and finish. Pre-drilled for easy installation. Available in LS-2, LS-3 and OCF styles. Handmade in the USA.

€400.88 €503.95

-€11.51

KLOCK WERKS Oil Cooler Guard — Black

Enhances the center of the oil cooler trim with a stylish guard. Easy to install and built in the USA.

€44.80 €56.31

-€11.51

KLOCK WERKS Oil Cooler Guard — Chrome

Dresses up the oil cooler area with matching vent‑screen material; easy to install. Made in the USA.

€44.80 €56.31

-€11.51

KLOCK WERKS Oil Cooler Guard — Chrome

Finishes the oil cooler area, adds visual pop, easy to install, made in the USA.

€44.80 €56.31

Thicky Front Fender — 21" wheel, front mount, Natural

-€85.47

PAUL YAFFE BAGGER NATION Thicky Front Fender — 21" wheel, front mount, Natural

Lengthened one-piece front fender with squared ends and thicker sidewalls; pre-drilled and direct bolt-on. Arrives raw for primer and paint; includes satin spacers or optional black/chrome upgrades.

€332.35 €417.82

Hugger Series Front Fender — 19" wheel, 41-7/8" contour, Black

-€75.46

KLOCK WERKS Hugger Series Front Fender — 19" wheel, 41-7/8" contour, Black

Stamped front fender that adds rigidity like a fork brace. Pre-drilled and e-coated for corrosion resistance. Requires Klock Werks Tire Hugger mounting blocks (sold separately).

€293.45 €368.91

Vertical Frame-Mount Fan Assisted Oil Cooler Kit — 10-row, Black, Silver, Orange

-€123.31

JAGG OIL COOLERS Vertical Frame-Mount Fan Assisted Oil Cooler Kit — 10-row,...

High-efficiency vertical, frame-mounted oil cooler kit with automatic fan; ideal for low-speed and highway use. Includes fan, hose, hardware, thermal switch wiring harness, and filter adapter. Made in the USA.

€479.53 €602.84

-€10.05

S&S CYCLE Oil Control Valve — 310-1150, Black, Silver

Helps regulate oil flow to the cooler and heads. Durable billet aluminum construction, steel check ball retainer, easy to install. Made in the USA.

€39.08 €49.13

-€5.05

DRAG SPECIALTIES SEATS Oil Cooler Cover — 8" L x 2-1/4" W x 1-1/4" D, Slimline, Black

Quality black vinyl cover with hook-and-loop fasteners. Fits OEM and Jagg Slimline oil coolers. Dimensions: 8" L x 2-1/4" W x 1-1/4" D. Made in the USA.

€14.30 €19.35

-€2.22

JAGG OIL COOLERS Replacement Gasket Service Kit — JAGG OIL COOLERS, GK4600, Black

Service kit with replacement gasket for oil filter adapter; made in the USA.

€8.64 €10.86

$Stainless Steel Braided Hose — 6.4 mm (1/4\"), 91 cm (3'), Stainless steel$

-€5.26

DRAG SPECIALTIES Stainless Steel Braided Hose — 6.4 mm (1/4\"), 91 cm (3'),...

Suitable for oil and gas applications. Not for use with fuel over 10% alcohol. Inspect regularly and replace if worn.

€14.85 €20.11

-€5.53

DRAG SPECIALTIES Stainless Steel Braided Hose — 7.9 mm (5/16"), 91 cm (3')

Hose for oil and gas applications. Not for use with fuel over 10% alcohol.

€15.65 €21.18

Black Braided Hose — 7.9 mm (5/16"), 183 cm (6'), -5 hose, Fuel/Oil

-€9.74

DRAG SPECIALTIES Black Braided Hose — 7.9 mm (5/16"), 183 cm (6'), -5 hose,...

Nylon braided hose with abrasion-resistant covering; suitable for fuel and oil applications.

€27.55 €37.29

-€7.24

DRAG SPECIALTIES Black Braided Hose — 1/2" ID, 3' length

Durable braided hose suitable for fuel and oil applications. Sold each.

€20.45 €27.69

Stainless Steel Mini-Clamps — For 3/8" oil/fuel lines, 10 pack

-€5.79

DRAG SPECIALTIES Stainless Steel Mini-Clamps — For 3/8" oil/fuel lines, 10 pack

Compact clamps for small-diameter hoses and tubing. Designed for use on oil and gas lines up to 3/8" in diameter. Made in the USA.

€16.36 €22.15

-€29.00

DRAG SPECIALTIES 6" Front Fender — 6" width, front mount, unfinished

Raw stamped steel front fender measuring approximately 6" W (inside). Mounts with OE hardware. Fenders with trim holes require a lower fender skirt. Sold each.

€81.98 €110.98

-€5.78

DRAG SPECIALTIES Chrome Rocker Oil Lines — Chrome

Overhead oil line set with crossover and crankcase-to-rocker box line; includes fittings and seals.

€16.34 €22.12

-€26.23

DRAG SPECIALTIES 6" Front Fender — 15.24 cm (6"), Unfinished

Raw stamped steel front fender; measures approximately 6" W (inside). Mounts with OE hardware. Fenders with trim holes require a lower fender skirt.

€74.14 €100.37

Front Fender — Fits 19", 18", 17", 16" wheels, Unfinished

-€26.23

DRAG SPECIALTIES Front Fender — Fits 19", 18", 17", 16" wheels, Unfinished

Smooth steel construction. Pre-drilled for mounting with existing hardware.

€74.14 €100.37

-€11.75

GOODRIDGE Hose — Oil line, Chrome

Replacement hose for repair or upgrade.

€45.55 €57.30

Custom Softail Front Fender — 21" wheel, 44-1/2" contour length, OCF, unfinished

-€73.62

RUSS WERNIMONT DESIGNS Custom Softail Front Fender — 21" wheel, 44-1/2" contour...

14-gauge steel, raw easy-to-paint finish, simple bolt-on installation. Fits LS-2 or OCF styles; made in the USA.

€286.33 €359.95

-€82.57

RUSS WERNIMONT DESIGNS Custom Softail Front Fender — 21", 5-1/2" width, Unfinished

14-gauge steel front fender with raw, easy-to-paint finish. Direct bolt-on installation; fender spacers included. Available in LS-2 and OCF lower-edge styles.

€233.38 €315.95

Custom Dresser Front Fender — 105 cm (41-1/4") contour, 19" wheel, unfinished

-€72.90

RUSS WERNIMONT DESIGNS Custom Dresser Front Fender — 105 cm (41-1/4") contour, 19"...

Handmade 14-gauge stamped steel front fender, pre-drilled for easy installation; LS-3 style.

€206.05 €278.95

shop by category

Body & Frame

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Contact us

Products

Our company

shop by category

Body & Frame  

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Body & Frame