Body & Frame (4)

-€25.47

DRAG SPECIALTIES Rear Fender — Unfinished, raw steel

Predrilled for OEM fender struts and license plate mount. Raw steel finish ready for customization.

€71.95 €97.42

-€1.65

S&S CYCLE Fitting 1/8-27 — 1/8" NPT female, silver

Easy-to-assemble, high-quality fitting for reliable connections.

€6.52 €8.17

-€3.00

S&S CYCLE Fitting 1/8-27 — 1/8" NPT male, brass

Easy-to-assemble high-quality fitting for reliable hose connections.

€11.66 €14.66

-€6.76

DRAG SPECIALTIES [object Object]

Kickstand extension that makes hard-to-reach kickstands easier to operate. Includes mounting hardware. Drilling required.

€19.10 €25.86

-€16.21

DRAG SPECIALTIES Gas Valve Kit — Shut-off, left-side reserve

Shut-off rod and seat assembly with left-side reserve; easy installation and durable construction.

€45.82 €62.03

-€26.56

DRAG SPECIALTIES Rear Fender — Raw finish, rear mount

Raw steel finish; predrilled for OEM fender struts and license plate mount. Sold each.

€75.07 €101.63

-€6.76

DRAG SPECIALTIES [object Object]

Extension plate that makes hard-to-reach kickstands easier to operate; includes mounting hardware; drilling required.

€19.10 €25.86

Gas Tank — 22 mm outlet, raw finish, bolt-on

-€60.91

DRAG SPECIALTIES Gas Tank — 22 mm outlet, raw finish, bolt-on

Heavy-gauge construction with reinforced seams; includes mounting tabs and hardware. Caps not included. Ships unpainted.

€172.15 €233.06

Gas Tank — 22 mm outlet, Carbureted, Raw

-€50.25

DRAG SPECIALTIES Gas Tank — 22 mm outlet, Carbureted, Raw

Made of heavy-gauge steel with reinforced seams. Includes extra-strong mounting tabs and hardware. Ships unpainted; caps not included. Must be pressure-tested and sealed before painting.

€142.00 €192.25

-€35.34

ARLEN NESS Wrapper Front Fender — 26" Black

Race-inspired, lightweight composite fender with direct bolt-on fitment. Made in the U.S.A.

€138.75 €174.09

-€2.14

DRAG SPECIALTIES [object Object]

Rubber bumper that clips to the round frame tube under the primary cover — ideal for custom applications.

€6.03 €8.17

-€60.91

DRAG SPECIALTIES Gas Tank — 22 mm outlet, carbureted, steel, raw finish, bolt-on

Heavy-gauge construction with reinforced seams. Includes extra-strong mounting tabs and mounting hardware. Shipped unpainted; caps not included.

€172.15 €233.06

Benchmark Front Fender for Dresser — 6.5" fender, 21" wheel fit, non-raked frame, black

-€82.92

KLOCK WERKS Benchmark Front Fender for Dresser — 6.5" fender, 21" wheel...

Durable front fender stamped from heavy U.S. steel with chrome mounting blocks; suitable for Dresser-style applications and custom builds. Made in the U.S.A.

€322.47 €405.39

-€1.84

DRAG SPECIALTIES [object Object]

Replacement brass bushings for kickstand — durable, corrosion‑resistant and easy to install.

€5.22 €7.06

Benchmark Front Fender for Dresser — 6-1/2" Fender, 26" wheel fit, raked frame, Black

-€64.12

KLOCK WERKS Benchmark Front Fender for Dresser — 6-1/2" Fender, 26" wheel...

Stamped 14-gauge steel front fender, E-coated for corrosion resistance, includes chrome mounting blocks. Made in the U.S.A.

€249.36 €313.48

-€18.51

KURYAKYN Oil Cooler Cover — Chrome

Direct-fit oil cooler cover that installs like the stock factory cover for a quick bolt-on upgrade.

€71.98 €90.49

Tire Hugger Front Fender for Dresser — 16" ,17" ,18" ,19" wheels, 39-1/2" contour, Black E-Coating

-€82.92

KLOCK WERKS Tire Hugger Front Fender for Dresser — 16" ,17" ,18" ,19"...

Stamped 14-gauge steel front fender with 13-step E-coated finish; laser cut and pre-drilled for precise fit. Includes mounting blocks and hardware.

€322.47 €405.39

$Tire Hugger Front Fender for Dresser — Fits 16\", 17\", 18\", 19\" wheels, Black E-Coating$

-€82.92

KLOCK WERKS Tire Hugger Front Fender for Dresser — Fits 16\", 17\", 18\",...

Stamped 14‑gauge steel front tire hugger with 13‑step e‑coated finish; laser cut and pre‑drilled. Includes mounting blocks and hardware. Made in the USA.

€322.47 €405.39

Tire Hugger Front Fender for Dresser — 16", 17", 18", 19" fit, Black E-coating

-€82.92

KLOCK WERKS Tire Hugger Front Fender for Dresser — 16", 17", 18", 19" fit,...

Stamped 14-gauge steel front Tire Hugger fender for Dresser with a factory-style, corrosion-resistant finish. Includes mounting blocks and hardware. Made in the USA.

€322.47 €405.39

-€18.22

DRAG SPECIALTIES [object Object]

High-strength steel kickstand that replaces OEM units; under-stock lengths for lowered suspension. Fits Big Twin, Softail, FLT and XL measured from the first bend to the first bend.

€51.49 €69.71

Tire Hugger Front Fender for Dresser — fits 16",17",18",19" wheels, 115 cm (45-1/4") contour, black E-Coating

-€82.92

KLOCK WERKS Tire Hugger Front Fender for Dresser — fits 16",17",18",19"...

Stamped 14-gauge steel front fender with a 13-step e-coated finish. Laser cut, pre-drilled, includes mounting blocks and hardware. Made in the USA.

€322.47 €405.39

-€27.35

DRAG SPECIALTIES [object Object]

Complete kickstand kit with standard-length kickstand, welded brackets, bumper, spring, pivot pin with bushings and retainer clip for secure, long-lasting operation.

€77.28 €104.63

Fat Bob-Style Gas Tanks — 18.9 L (5 US gal), Raw

-€70.90

DRAG SPECIALTIES Fat Bob-Style Gas Tanks — 18.9 L (5 US gal), Raw

Distinctive reproduction gas tanks constructed of drawn steel. Use with '84-E '96 screw-in caps (sold separately). Stock dash may need to be shimmed. '96-'99 models require pre-'95 gas caps and petcock.

€200.35 €271.25

Tire Hugger Front Fender for Dresser — 21" wheel, 5-7/8" fender width, E-Coating

-€82.92

KLOCK WERKS Tire Hugger Front Fender for Dresser — 21" wheel, 5-7/8"...

Stamped 14-gauge steel front hugger with a multi-step e-coated finish; laser cut, pre-drilled, and supplied with mounting blocks and hardware.

€322.47 €405.39

Universal Oil Cooler — 6-row, 90°, bolt-on bottom mount, black powder-coated

-€39.69

JAGG OIL COOLERS Universal Oil Cooler — 6-row, 90°, bolt-on bottom mount, black...

High-quality universal oil cooler with fully-brazed construction. Ideal for custom builds and racing; mounting hardware sold separately.

€154.34 €194.03

Tire Hugger Front Fender for Dresser — 5-7/8 in, 21" wheel, Black, E-coating

-€82.92

KLOCK WERKS Tire Hugger Front Fender for Dresser — 5-7/8 in, 21" wheel,...

Stamped 14-gauge steel front fender with 13-step e-coated finish. Laser cut, pre-drilled and includes mounting blocks and hardware. Made in the USA.

€322.47 €405.39

-€16.90

DRAG SPECIALTIES [object Object]

High-strength steel kickstand that replaces OEM units; under-stock lengths for lowered suspension. Measured for Big Twin, Softail, FLT and XL from the first top bend to the first bottom bend.

€47.75 €64.65

$Tire Hugger Front Fender for Dresser — 21\", 5-7/8\", E-coating black$

-€82.92

KLOCK WERKS Tire Hugger Front Fender for Dresser — 21\", 5-7/8\",...

Stamped 14-gauge hugger fender with 13-step e-coating; laser cut, pre-drilled, includes satin mounting blocks and hardware. Made in the USA.

€322.47 €405.39

-€20.65

DRAG SPECIALTIES Replacement Rubber-Mounting Kit — QuickBob® fitment

Replacement rubber-mounting kit for QuickBob® gas tanks; compatible with EU one-piece 13,63 L Harley Fat Bob replicas.

€58.35 €79.00

Tire Hugger Front Fender for Dresser — 21", 5-7/8", Black

-€57.69

KLOCK WERKS Tire Hugger Front Fender for Dresser — 21", 5-7/8", Black

Stamped 14-gauge construction with a 13-step e-coated finish; laser cut and pre-drilled for a precise fit.

€224.36 €282.05

shop by category

Body & Frame

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Contact us

Products

Our company

shop by category

Body & Frame  

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Body & Frame