Body & Frame (3)

DRAG SPECIALTIES [object Object]

High-strength steel kickstand that replaces OEM units. Under-stock lengths fit bikes with lowered suspension. Measure Big Twin, Softail, FLT and XL from the first top bend to the first bottom bend.

€42.93

DRAG SPECIALTIES OEM Rear Fender — 24 cm (9-1/2"), unfinished

Direct replacement OEM rear fender, pre-drilled for OE components and taillight; accepts OEM struts and mounting hardware.

€135.08

DRAG SPECIALTIES [object Object]

High-strength steel kickstand that replaces OEM units, with under-stock length available for lowered suspension and model-specific measurement guidance.

€40.47

DRAG SPECIALTIES Pop-Up Dipstick — Black

Easy-to-use pop-up dipstick for quick oil level checks. Sold each.

€16.42

DRAG SPECIALTIES [object Object]

High-strength steel kickstand — direct OEM replacement; under-stock lengths for lowered suspension. Measured per model (Big Twin, Softail, FLT, XL).

€38.37

DRAG SPECIALTIES Bezel Dipstick — Black

Restores a clean finish around the dipstick opening; includes replacement push nut for installation.

€8.77

DRAG SPECIALTIES Bezel Dipstick — 81028, Chrome

Bezel-style dipstick with included replacement push nut for easy installation and reliable oil checks.

€9.39

EMGO Replacement Gas Cap — Vented, Chrome

OE-style flat vented gas cap for direct replacement. Helps prevent leaks and reduces tank vacuum. Easy, tool-friendly installation.

€5.45

DRAG SPECIALTIES [object Object]

Durable high-strength steel kickstand. Direct OEM replacement. Shorter lengths suited for lowered-suspension bikes. Measured from the first top bend to the first bottom bend.

€43.67

EMGO Replacement Gas Cap Gaskets — 63.5 mm (2.5 in), 10 pack, cork

Durable replacement gaskets to restore a secure seal on gas caps. Easy to install.

€8.33

DRAG SPECIALTIES [object Object]

High-strength steel kickstand that replaces OEM units, fits lowered suspension setups, and should be measured per model for proper fit.

€46.30

DRAG SPECIALTIES Oil Tank — 3.0 qt, Chrome

Replacement oil tank with filler cap and about 3.0 quart capacity.

€124.18

DRAG SPECIALTIES Rear Fender — Unfinished

Raw steel finish; predrilled for OEM fender struts and license plate mount.

€108.08

DRAG SPECIALTIES Push-Button Fuel Door Latch Kit — Chrome

Push-button latch kit replaces the key latch and includes the door spring hinge plate for secure, easy installation.

€21.78

DRAG SPECIALTIES [object Object]

High-strength steel kickstand. Direct OEM replacement. Under-stock options for lowered suspension. Measured from first top bend to first bottom bend for Big Twin, Softail, FLT and XL.

€46.18

DRAG SPECIALTIES Push-Button Fuel Door Latch Kit — Black, P/N 77388BS2

Replaces a keyed fuel door latch with a push-button mechanism and includes a door spring hinge plate for secure operation.

€21.78

DRAG SPECIALTIES [object Object]

High-strength steel kickstand; direct OEM replacement; under-stock lengths available for lowered suspension; measured from the first bend to the first bend for Big Twin, Softail, FLT and XL.

€46.18

DRAG SPECIALTIES [object Object]

High-strength steel kickstand — direct OEM replacement; under-stock lengths available for lowered suspension.

€37.54

DRAG SPECIALTIES 6" Front Fender — 6" width, front mount, unfinished

Raw stamped-steel front fender; measures approximately 6" W (inside). Mounts with OE hardware. Sold each.

€76.33

DRAG SPECIALTIES [object Object]

High-strength steel kickstand that replaces OEM units and is available in under-stock length for lowered suspension. Measurement: Big Twin, Softail, FLT and XL kickstands are measured from the first bend at the top to the first bend at the bottom.

€46.18

DRAG SPECIALTIES Oil Tank Bracket Set — Chrome

Replaces front and rear oil tank brackets on late-model Softail motorcycles for improved fit and appearance.

€23.29

DRAG SPECIALTIES [object Object]

High-strength steel kickstand that replaces OEM units for a precise fit; under-stock length suitable for lowered suspension. Measured for Big Twin, Softail, FLT and XL from the first bend at the top to the first bend at the bottom.

€46.18

$Oil Plug Temperature Gauge — 70 mm (2-3/4\"), chrome$

DRAG SPECIALTIES Oil Plug Temperature Gauge — 70 mm (2-3/4\"), chrome

Monitors oil temperature up to 350°F. Installs in the oil plug for direct readings and quick response.

€19.79

DRAG SPECIALTIES Heavy-Duty Front Fender — Unfinished, front

Heavy-duty construction, raw finish, pre-drilled for OEM hardware, smooth style without trim holes.

€118.08

DRAG SPECIALTIES Screw-In Locking Skull Gas Cap — Chrome

Hidden key slot under the skull keeps dirt out of the lock; two keys included.

€34.27

TECMATE [object Object]

Heat-resistant ABS puck that spreads the load and stabilizes the side stand on soft or hot surfaces. Oval shape with splash-guard rim and 5 mm tether hole. 14 x 12 cm.

€6.33

DRAG SPECIALTIES Vibration Mount — 5 Pack, Black

Reduces vibration to protect electrical enclosures, fluid reservoirs and custom parts. Meets or exceeds OEM specifications.

€9.03

DRAG SPECIALTIES Heavy-Duty Front Fender — Front, Unfinished steel

Rugged, pre-drilled front fender with a smooth profile—no holes for trim, fender tip, or skirt. Raw finish and straightforward OEM installation.

€102.76

DRAG SPECIALTIES [object Object]

Durable kickstand spring; measured from hook to hook to ensure correct fit.

€3.14

DRAG SPECIALTIES 6" Front Fender — front mount, 7-1/2" inside mounting width

Raw stamped steel front fender; measures approx. 6" W (inside). Mounts with OE hardware. Requires lower fender skirt if trim holes are present.

€76.33

shop by category

Body & Frame

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Contact us

Products

Our company

shop by category

Body & Frame  

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Body & Frame