Body & Frame (3)

$Oil Plug Temperature Gauge — 70 mm (2-3/4\"), chrome$

DRAG SPECIALTIES Oil Plug Temperature Gauge — 70 mm (2-3/4\"), chrome

Monitors oil temperature up to 350°F. Installs in the oil plug for direct readings and quick response.

€19.79

DRAG SPECIALTIES Heavy-Duty Front Fender — Unfinished, front

Heavy-duty construction, raw finish, pre-drilled for OEM hardware, smooth style without trim holes.

€118.08

DRAG SPECIALTIES Lower Fitting Seals — 10 Pack, Black

Seals for lower fittings used on oil feed and return lines; replace worn seals to prevent leaks.

€13.94

CULT WERK Tank Lifter — Black

Height-adjustable tank lifter (35–50 mm) that raises the front of the fuel tank to improve clearance and highlight the "Peanut" shape; allows wiring to be routed under the tank without altering cables.

€55.69

DRAG SPECIALTIES Vibration Mount — 5 Pack, Black

Reduces vibration to protect electrical enclosures, fluid reservoirs and custom parts. Meets or exceeds OEM specifications.

€9.03

DRAG SPECIALTIES Heavy-Duty Front Fender — Front, Unfinished steel

Rugged, pre-drilled front fender with a smooth profile—no holes for trim, fender tip, or skirt. Raw finish and straightforward OEM installation.

€102.76

DRAG SPECIALTIES Lower Fitting Seals — 10 pack, brown

Seals for lower fittings on oil feed and return lines; replace when worn to prevent leaks.

€17.29

CULT WERK Tank Lifter — height 35–50 mm, Black

Height-adjustable tank lift (35–50 mm) raises the front attachment for improved 'Peanut' shaping and allows the wiring harness to be routed without modifying cables.

€44.69

DRAG SPECIALTIES 6" Front Fender — front mount, 7-1/2" inside mounting width

Raw stamped steel front fender; measures approx. 6" W (inside). Mounts with OE hardware. Requires lower fender skirt if trim holes are present.

€76.33

KURYAKYN Easy-turn Dipstick Cover — Chrome

Uses factory dipstick internals; ergonomic cap makes turning and checking oil levels easy.

€27.35

6" Front Fender — 6" inside width, front mount, with trim holes, unfinished

DRAG SPECIALTIES 6" Front Fender — 6" inside width, front mount, with trim...

Raw stamped steel front fender; mounts with OE hardware. Fenders with trim holes require lower fender skirt.

€76.33

S&S CYCLE Oil Pump Compression Return Fitting — 50-8120, Chrome

Precision compression return fitting for oil pump installations. Made in the USA. Easy to install.

€24.24

DRAG SPECIALTIES Replacement Gas Tank Bung — Weld-In, Chrome

Designed to be welded into fuel tanks for custom filler-hole mounting; accepts screw-in gas caps from 1984–1996.

€4.93

DRAG SPECIALTIES OEM Rear Fender — 7-1/4" (18.5 cm), Unfinished

Direct OEM replacement rear fender; pre-drilled, accepts OE components and taillight assembly, and fits original fender struts and mounting hardware.

€40.86

S&S CYCLE Supply/Return Line Elbow — 90° return line, Black

Precision elbow fitting for fluid routing. Made in the USA. Easy to install.

€23.25

DRAG SPECIALTIES Custom Rear Fender — 77 cm L x 18 cm W, Unfinished

Raw steel rear fender; not pre-drilled and no taillight or license plate mount. Measures approx 30" L x 7-1/8" W. Each.

€53.94

DRAG SPECIALTIES Rear Fender — Unfinished, raw steel

Predrilled for OEM fender struts and license plate mount. Raw steel finish ready for customization.

€69.65

S&S CYCLE Fitting 1/8-27 — 1/8" NPT female, silver

Easy-to-assemble, high-quality fitting for reliable connections.

€6.31

S&S CYCLE Fitting 1/8-27 — 1/8" NPT male, brass

Easy-to-assemble high-quality fitting for reliable hose connections.

€11.29

DRAG SPECIALTIES Gas Valve Kit — Shut-off, left-side reserve

Shut-off rod and seat assembly with left-side reserve; easy installation and durable construction.

€44.35

DRAG SPECIALTIES Rear Fender — Raw finish, rear mount

Raw steel finish; predrilled for OEM fender struts and license plate mount. Sold each.

€72.67

DRAG SPECIALTIES Gas Tank — 22 mm outlet, raw finish, bolt-on

Heavy-gauge construction with reinforced seams; includes mounting tabs and hardware. Caps not included. Ships unpainted.

€166.64

DRAG SPECIALTIES Gas Tank — 22 mm outlet, Carbureted, Raw

Made of heavy-gauge steel with reinforced seams. Includes extra-strong mounting tabs and hardware. Ships unpainted; caps not included. Must be pressure-tested and sealed before painting.

€137.46

ARLEN NESS Wrapper Front Fender — 26" Black

Race-inspired, lightweight composite fender with direct bolt-on fitment. Made in the U.S.A.

€134.31

JAGG OIL COOLERS Hose Clamp — 3/8" (9.5 mm), 10-pack, Black

Worm-drive clamp for secure, adjustable connections in custom oil cooler installations.

€11.00

DRAG SPECIALTIES Gas Tank — 22 mm outlet, carbureted, steel, raw finish, bolt-on

Heavy-gauge construction with reinforced seams. Includes extra-strong mounting tabs and mounting hardware. Shipped unpainted; caps not included.

€166.64

Benchmark Front Fender for Dresser — 6.5" fender, 21" wheel fit, non-raked frame, black

KLOCK WERKS Benchmark Front Fender for Dresser — 6.5" fender, 21" wheel...

Durable front fender stamped from heavy U.S. steel with chrome mounting blocks; suitable for Dresser-style applications and custom builds. Made in the U.S.A.

€312.15

Benchmark Front Fender for Dresser — 6-1/2" Fender, 26" wheel fit, raked frame, Black

KLOCK WERKS Benchmark Front Fender for Dresser — 6-1/2" Fender, 26" wheel...

Stamped 14-gauge steel front fender, E-coated for corrosion resistance, includes chrome mounting blocks. Made in the U.S.A.

€241.38

KURYAKYN Oil Cooler Cover — Chrome

Direct-fit oil cooler cover that installs like the stock factory cover for a quick bolt-on upgrade.

€69.67

Tire Hugger Front Fender for Dresser — 16" ,17" ,18" ,19" wheels, 39-1/2" contour, Black E-Coating

KLOCK WERKS Tire Hugger Front Fender for Dresser — 16" ,17" ,18" ,19"...

Stamped 14-gauge steel front fender with 13-step E-coated finish; laser cut and pre-drilled for precise fit. Includes mounting blocks and hardware.

€312.15

shop by category

Body & Frame

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Contact us

Products

Our company