Body & Frame (3)

-€19.81

DRAG SPECIALTIES [object Object]

High-strength steel kickstand that replaces OEM units, with under-stock length available for lowered suspension and model-specific measurement guidance.

€36.79 €56.60

-€5.94

DRAG SPECIALTIES Fuel/Oil Line — 12.7 mm (1/2"), 61 cm (24")

Reinforced, smooth-bore fuel- and oil-resistant line for reliable service.

€16.81 €22.75

-€18.78

DRAG SPECIALTIES [object Object]

High-strength steel kickstand — direct OEM replacement; under-stock lengths for lowered suspension. Measured per model (Big Twin, Softail, FLT, XL).

€34.88 €53.66

-€18.78

DRAG SPECIALTIES [object Object]

High-strength steel kickstand; direct OEM replacement. Under-stock length suited for lowered suspension. Measure Big Twin, Softail, FLT and XL from first bend to first bend.

€34.88 €53.66

-€21.38

DRAG SPECIALTIES [object Object]

Durable high-strength steel kickstand. Direct OEM replacement. Shorter lengths suited for lowered-suspension bikes. Measured from the first top bend to the first bottom bend.

€39.70 €61.08

$Colored Hose Clamps for Oil Lines — 3/8\" oil lines, 6-pack, Chrome$

-€11.16

NAMZ Colored Hose Clamps for Oil Lines — 3/8\" oil lines, 6-pack,...

Custom-colored hose clamps for oil lines that fit braided copper, stainless-steel and most braided rubber hoses. Ideal for custom builds; made in the USA.

€33.49 €44.65

-€22.66

DRAG SPECIALTIES [object Object]

High-strength steel kickstand that replaces OEM units, fits lowered suspension setups, and should be measured per model for proper fit.

€42.09 €64.75

-€39.50

DRAG SPECIALTIES Rear Fender — Unfinished

Raw steel finish; predrilled for OEM fender struts and license plate mount.

€111.65 €151.15

-€3.01

DRAG SPECIALTIES Oil Line Retainer Assembly — 3/8" retainer, black

Secures oil lines from the oil tank to the engine. Replacement recommended when lines are removed. O-rings included.

€8.51 €11.52

-€22.60

DRAG SPECIALTIES [object Object]

High-strength steel kickstand. Direct OEM replacement. Under-stock options for lowered suspension. Measured from first top bend to first bottom bend for Big Twin, Softail, FLT and XL.

€41.98 €64.58

-€3.01

DRAG SPECIALTIES Oil Line Retainer Assembly — 1/2" retainer, black

Secures oil lines from the oil tank to the engine. Replacement recommended when lines are removed. O-rings included.

€8.51 €11.52

-€22.60

DRAG SPECIALTIES [object Object]

High-strength steel kickstand; direct OEM replacement; under-stock lengths available for lowered suspension; measured from the first bend to the first bend for Big Twin, Softail, FLT and XL.

€41.98 €64.58

-€41.92

S&S CYCLE Oil Line Kit — fits '07–'16 Touring, Black, Silver, Gold

Complete oil line kit for S&S crankcase installs on '07–'16 Touring models. Includes formed adapter, oil lines, fittings and clamps. Made in the USA.

€163.02 €204.94

-€18.38

DRAG SPECIALTIES [object Object]

High-strength steel kickstand — direct OEM replacement; under-stock lengths available for lowered suspension.

€34.13 €52.51

-€27.90

DRAG SPECIALTIES 6" Front Fender — 6" width, front mount, unfinished

Raw stamped-steel front fender; measures approximately 6" W (inside). Mounts with OE hardware. Sold each.

€78.85 €106.75

-€22.60

DRAG SPECIALTIES [object Object]

High-strength steel kickstand that replaces OEM units and is available in under-stock length for lowered suspension. Measurement: Big Twin, Softail, FLT and XL kickstands are measured from the first bend at the top to the first bend at the bottom.

€41.98 €64.58

-€22.60

DRAG SPECIALTIES [object Object]

High-strength steel kickstand that replaces OEM units for a precise fit; under-stock length suitable for lowered suspension. Measured for Big Twin, Softail, FLT and XL from the first bend at the top to the first bend at the bottom.

€41.98 €64.58

Heavy-Duty Front Fender — Unfinished, front

-€43.16

DRAG SPECIALTIES Heavy-Duty Front Fender — Unfinished, front

Heavy-duty construction, raw finish, pre-drilled for OEM hardware, smooth style without trim holes.

€121.99 €165.15

-€5.09

DRAG SPECIALTIES Lower Fitting Seals — 10 Pack, Black

Seals for lower fittings used on oil feed and return lines; replace worn seals to prevent leaks.

€14.40 €19.49

-€1.15

TECMATE [object Object]

Heat-resistant ABS puck that spreads the load and stabilizes the side stand on soft or hot surfaces. Oval shape with splash-guard rim and 5 mm tether hole. 14 x 12 cm.

€5.75 €6.90

Heavy-Duty Front Fender — Front, Unfinished steel

-€37.56

DRAG SPECIALTIES Heavy-Duty Front Fender — Front, Unfinished steel

Rugged, pre-drilled front fender with a smooth profile—no holes for trim, fender tip, or skirt. Raw finish and straightforward OEM installation.

€106.16 €143.72

-€6.32

DRAG SPECIALTIES Lower Fitting Seals — 10 pack, brown

Seals for lower fittings on oil feed and return lines; replace when worn to prevent leaks.

€17.86 €24.18

-€8.00

CULT WERK Tank Lifter — height 35–50 mm, Black

Height-adjustable tank lift (35–50 mm) raises the front attachment for improved 'Peanut' shaping and allows the wiring harness to be routed without modifying cables.

€46.17 €54.17

-€1.53

DRAG SPECIALTIES [object Object]

Durable kickstand spring; measured from hook to hook to ensure correct fit.

€2.85 €4.38

-€27.90

DRAG SPECIALTIES 6" Front Fender — front mount, 7-1/2" inside mounting width

Raw stamped steel front fender; measures approx. 6" W (inside). Mounts with OE hardware. Requires lower fender skirt if trim holes are present.

€78.85 €106.75

-€1.42

DRAG SPECIALTIES [object Object]

Durable replacement kickstand spring measured hook-to-hook for accurate fit and reliable tension.

€2.64 €4.06

6" Front Fender — 6" inside width, front mount, with trim holes, unfinished

-€27.90

DRAG SPECIALTIES 6" Front Fender — 6" inside width, front mount, with trim...

Raw stamped steel front fender; mounts with OE hardware. Fenders with trim holes require lower fender skirt.

€78.85 €106.75

-€8.88

S&S CYCLE Oil Pump Compression Return Fitting — 50-8120, Chrome

Precision compression return fitting for oil pump installations. Made in the USA. Easy to install.

€25.05 €33.93

-€2.25

DRAG SPECIALTIES [object Object]

Direct-fit kickstand spring. Springs are measured from hook to hook.

€4.18 €6.43

-€1.80

DRAG SPECIALTIES Replacement Gas Tank Bung — Weld-In, Chrome

Designed to be welded into fuel tanks for custom filler-hole mounting; accepts screw-in gas caps from 1984–1996.

€5.09 €6.89

shop by category

Body & Frame

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Contact us

Products

Our company

shop by category

Body & Frame  

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Body & Frame