Body & Frame (3)

-€27.90

DRAG SPECIALTIES 6" Front Fender — 6" width, front mount, unfinished

Raw stamped-steel front fender; measures approximately 6" W (inside). Mounts with OE hardware. Sold each.

€78.85 €106.75

-€8.51

DRAG SPECIALTIES Oil Tank Bracket Set — Chrome

Replaces front and rear oil tank brackets on late-model Softail motorcycles for improved fit and appearance.

€24.06 €32.57

$Oil Plug Temperature Gauge — 70 mm (2-3/4\"), chrome$

-€7.24

DRAG SPECIALTIES Oil Plug Temperature Gauge — 70 mm (2-3/4\"), chrome

Monitors oil temperature up to 350°F. Installs in the oil plug for direct readings and quick response.

€20.44 €27.68

Heavy-Duty Front Fender — Unfinished, front

-€43.16

DRAG SPECIALTIES Heavy-Duty Front Fender — Unfinished, front

Heavy-duty construction, raw finish, pre-drilled for OEM hardware, smooth style without trim holes.

€121.99 €165.15

-€5.09

DRAG SPECIALTIES Lower Fitting Seals — 10 Pack, Black

Seals for lower fittings used on oil feed and return lines; replace worn seals to prevent leaks.

€14.40 €19.49

-€12.52

DRAG SPECIALTIES Screw-In Locking Skull Gas Cap — Chrome

Hidden key slot under the skull keeps dirt out of the lock; two keys included.

€35.40 €47.92

-€3.30

DRAG SPECIALTIES Vibration Mount — 5 Pack, Black

Reduces vibration to protect electrical enclosures, fluid reservoirs and custom parts. Meets or exceeds OEM specifications.

€9.33 €12.63

Heavy-Duty Front Fender — Front, Unfinished steel

-€37.56

DRAG SPECIALTIES Heavy-Duty Front Fender — Front, Unfinished steel

Rugged, pre-drilled front fender with a smooth profile—no holes for trim, fender tip, or skirt. Raw finish and straightforward OEM installation.

€106.16 €143.72

-€6.32

DRAG SPECIALTIES Lower Fitting Seals — 10 pack, brown

Seals for lower fittings on oil feed and return lines; replace when worn to prevent leaks.

€17.86 €24.18

-€1.95

DRAG SPECIALTIES Replacement Oil Filler Plug — Chrome

Replacement filler plug for oil tanks; secure seal and easy installation.

€5.50 €7.45

-€27.90

DRAG SPECIALTIES 6" Front Fender — front mount, 7-1/2" inside mounting width

Raw stamped steel front fender; measures approx. 6" W (inside). Mounts with OE hardware. Requires lower fender skirt if trim holes are present.

€78.85 €106.75

Screw-In Locking Skull Gas Cap — Black, vented

-€12.14

DRAG SPECIALTIES Screw-In Locking Skull Gas Cap — Black, vented

Screw-In Locking Skull Gas Cap with hidden key slot and two keys included. Screw-in installation for easy replacement.

€34.28 €46.42

-€7.26

KURYAKYN Easy-turn Dipstick Cover — Chrome

Uses factory dipstick internals; ergonomic cap makes turning and checking oil levels easy.

€28.25 €35.51

6" Front Fender — 6" inside width, front mount, with trim holes, unfinished

-€27.90

DRAG SPECIALTIES 6" Front Fender — 6" inside width, front mount, with trim...

Raw stamped steel front fender; mounts with OE hardware. Fenders with trim holes require lower fender skirt.

€78.85 €106.75

-€8.88

S&S CYCLE Oil Pump Compression Return Fitting — 50-8120, Chrome

Precision compression return fitting for oil pump installations. Made in the USA. Easy to install.

€25.05 €33.93

-€14.93

DRAG SPECIALTIES OEM Rear Fender — 7-1/4" (18.5 cm), Unfinished

Direct OEM replacement rear fender; pre-drilled, accepts OE components and taillight assembly, and fits original fender struts and mounting hardware.

€42.22 €57.15

-€19.12

S&S CYCLE Supply/Return Line Elbow — 90° return line, Black

Precision elbow fitting for fluid routing. Made in the USA. Easy to install.

€24.02 €43.14

Vented Gas Cap with Weld-On Bung — 1-5/8" diameter, Aluminum

-€27.76

LA CHOPPERS Vented Gas Cap with Weld-On Bung — 1-5/8" diameter, Aluminum

Easy weld-in vented gas cap with knurled aluminum cap, right-hand thread, and included weld-on bung.

€41.07 €68.83

-€19.72

DRAG SPECIALTIES Custom Rear Fender — 77 cm L x 18 cm W, Unfinished

Raw steel rear fender; not pre-drilled and no taillight or license plate mount. Measures approx 30" L x 7-1/8" W. Each.

€55.73 €75.45

-€25.47

DRAG SPECIALTIES Rear Fender — Unfinished, raw steel

Predrilled for OEM fender struts and license plate mount. Raw steel finish ready for customization.

€71.95 €97.42

-€1.65

S&S CYCLE Fitting 1/8-27 — 1/8" NPT female, silver

Easy-to-assemble, high-quality fitting for reliable connections.

€6.52 €8.17

-€12.45

DRAG SPECIALTIES Split Skull Gas Cap — Chrome, vented

Distinctive Split Skull styling for the fuel area; easy installation and secure closure.

€35.18 €47.63

-€3.00

S&S CYCLE Fitting 1/8-27 — 1/8" NPT male, brass

Easy-to-assemble high-quality fitting for reliable hose connections.

€11.66 €14.66

-€26.56

DRAG SPECIALTIES Rear Fender — Raw finish, rear mount

Raw steel finish; predrilled for OEM fender struts and license plate mount. Sold each.

€75.07 €101.63

-€35.34

ARLEN NESS Wrapper Front Fender — 26" Black

Race-inspired, lightweight composite fender with direct bolt-on fitment. Made in the U.S.A.

€138.75 €174.09

Benchmark Front Fender for Dresser — 6.5" fender, 21" wheel fit, non-raked frame, black

-€82.92

KLOCK WERKS Benchmark Front Fender for Dresser — 6.5" fender, 21" wheel...

Durable front fender stamped from heavy U.S. steel with chrome mounting blocks; suitable for Dresser-style applications and custom builds. Made in the U.S.A.

€322.47 €405.39

Benchmark Front Fender for Dresser — 6-1/2" Fender, 26" wheel fit, raked frame, Black

-€64.12

KLOCK WERKS Benchmark Front Fender for Dresser — 6-1/2" Fender, 26" wheel...

Stamped 14-gauge steel front fender, E-coated for corrosion resistance, includes chrome mounting blocks. Made in the U.S.A.

€249.36 €313.48

-€18.51

KURYAKYN Oil Cooler Cover — Chrome

Direct-fit oil cooler cover that installs like the stock factory cover for a quick bolt-on upgrade.

€71.98 €90.49

-€9.92

KURYAKYN Push-Button Fuel Door Latch — Black

Direct replacement for the key-lock fuel door latch; opens the cap with a simple push of the button.

€38.57 €48.49

Tire Hugger Front Fender for Dresser — 16" ,17" ,18" ,19" wheels, 39-1/2" contour, Black E-Coating

-€82.92

KLOCK WERKS Tire Hugger Front Fender for Dresser — 16" ,17" ,18" ,19"...

Stamped 14-gauge steel front fender with 13-step E-coated finish; laser cut and pre-drilled for precise fit. Includes mounting blocks and hardware.

€322.47 €405.39

shop by category

Body & Frame

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Contact us

Products

Our company

shop by category

Body & Frame  

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Body & Frame