Body & Frame (3)

-€9.26
Out of Stock

DRAG SPECIALTIES [object Object]

Kickstand extension that makes hard-to-reach kickstands easier to operate. Includes mounting hardware. Drilling required.

€26.16 €35.42

Screw-In Gas Cap — Vented, Early style, Chrome

-€4.64
Out of Stock

DRAG SPECIALTIES Screw-In Gas Cap — Vented, Early style, Chrome

Provides a screw-in closure with a provision for evaporative emissions control equipment to support reliable fuel system operation.

€13.13 €17.77

-€30.18
Out of Stock

DRAG SPECIALTIES Rear Fender — Unfinished steel

Predrilled rear fender for OEM fender struts and license plate mount; ships ready for custom finishing.

€85.30 €115.48

-€9.46
Out of Stock

DRAG SPECIALTIES [object Object]

Increases kickstand surface area for easier use and better stability. Includes mounting hardware; drilling required for installation.

€26.74 €36.20

-€4.64
Out of Stock

DRAG SPECIALTIES Screw-In Gas Cap — Non-vented, Chrome

Screw-In Gas Cap with provision for evaporative emissions control equipment; screw-in installation provides a secure fuel-tank seal.

€13.13 €17.77

-€30.18
Out of Stock

DRAG SPECIALTIES Rear Fender — Unfinished steel

Pre-drilled for OEM fender struts and license plate mount. Ready for custom finishing.

€85.30 €115.48

Gas Tank with Chrome Aero-Style Gas Cap — 3.3 gal (12.5 L), 22 mm outlet, chrome

-€85.48
Out of Stock

DRAG SPECIALTIES Gas Tank with Chrome Aero-Style Gas Cap — 3.3 gal (12.5 L), 22...

Rubber-mounted bolt-on flat-bottom tank with locking aero-style cap; ships unpainted and should be pressure tested and sealed before painting.

€241.55 €327.03

-€18.62
Out of Stock

DRAG SPECIALTIES [object Object]

Polished chrome kickstand kits with spring tab, leg stop and spring. Available in standard and undersize lengths.

€52.63 €71.25

-€17.41
Out of Stock

DRAG SPECIALTIES [object Object]

Polished chrome kickstand kits with spring tab, leg stop and spring; available in standard and undersize lengths.

€49.19 €66.60

-€47.44
Out of Stock

DRAG SPECIALTIES Gas Tank — 3/8" NPT outlet, Carbureted, Raw

Durable replacement gas tank with reinforced seams, extra-strong mounting tabs and included hardware. Ships unpainted; caps not included.

€134.08 €181.52

WFB™ Benchmark Front Fender — 6-1/2" width, 26" wheel, Black, E-Coating

-€83.00
Out of Stock

KLOCK WERKS WFB™ Benchmark Front Fender — 6-1/2" width, 26" wheel, Black,...

Rivetless, pre-drilled front fender with an extended 1.5" rear tail; pairs with WFB™ rear fender. Made in USA.

€322.80 €405.80

-€23.42
Out of Stock

DRAG SPECIALTIES [object Object]

Complete kickstand kit includes polished chrome kickstand with spring tab, leg stop and spring; available in standard and undersize lengths.

€66.17 €89.59

-€29.31
Out of Stock

DRAG SPECIALTIES [object Object]

Polished chrome kickstand kits with spring tab, leg stop and spring (unless noted). Available in standard and undersize lengths.

€82.83 €112.14

-€50.25
Out of Stock

DRAG SPECIALTIES Gas Tank — 22 mm outlet, bolt-on mount, raw finish

Heavy-gauge construction with reinforced seams. Includes strong mounting tabs and hardware. Shipped unpainted; caps not included. Must be fitted, pressure-tested and sealed before painting.

€142.00 €192.25

Benchmark Front Fender for Dresser — 6-1/2" wide, fits 16–19" wheels, black e-coating

-€90.55
Out of Stock

KLOCK WERKS Benchmark Front Fender for Dresser — 6-1/2" wide, fits 16–19"...

Durable stamped steel front fender with e-coating and chrome mounting blocks. Adaptable for custom applications. Made in the U.S.A.

€352.15 €442.70

-€2.14
Out of Stock

DRAG SPECIALTIES [object Object]

Durable rubber bumper that clips to the round frame tube under the primary cover; ideal for custom applications.

€6.03 €8.17

Fat Bob-Style Gas Tank — 13.2 L (3.5 US gal), 22 mm outlet, Raw

-€63.90
Out of Stock

DRAG SPECIALTIES Fat Bob-Style Gas Tank — 13.2 L (3.5 US gal), 22 mm outlet, Raw

Fat Bob-style tank accepts stock dash and speedo equipment and fits standard late-model Harley petcocks.

€180.64 €244.54

-€17.72
Out of Stock

DRAG SPECIALTIES [object Object]

High-strength steel kickstand; direct OEM replacement; under-stock lengths for lowered suspension; measurement guidance for Big Twin, Softail, FLT and XL.

€50.08 €67.80

-€71.96
Out of Stock

DRAG SPECIALTIES Fat Bob-Style Gas Tank — 18.9 L (5 US gal), 22 mm outlet, Raw

Classic Fat Bob styling with direct-fit compatibility for stock instrumentation and late-model Harley petcocks.

€203.38 €275.34

-€17.72
Out of Stock

DRAG SPECIALTIES [object Object]

Durable high-strength steel kickstand — direct OEM replacement. Under-stock lengths available for lowered suspension; measured from the first top bend to the first bottom bend for Big Twin, Softail, FLT and XL.

€50.08 €67.80

Fat Bob-Style Gas Tanks — 22.7 L (6 US gal.), Raw Silver

-€71.96
Out of Stock

DRAG SPECIALTIES Fat Bob-Style Gas Tanks — 22.7 L (6 US gal.), Raw Silver

Distinctive drawn-steel Fat Bob-style gas tanks; check cap compatibility for '84-E and '96-'99 fitments.

€203.38 €275.34

-€18.62
Out of Stock

DRAG SPECIALTIES [object Object]

High-strength steel kickstand that replaces OEM units with a precise fit. Suitable for bikes with lowered suspension when using under-stock length options. Measurement method applies to Big Twin, Softail, FLT and XL models.

€52.63 €71.25

-€72.31
Out of Stock

DRAG SPECIALTIES Fat Bob-Style Gas Tank — 18.9 L (5 US gal.), 22 mm outlet, Raw

Fat Bob-style tank accepts stock dash and speedo equipment and is compatible with late-model Harley petcocks. Clean styling suited for custom builds and restorations.

€204.36 €276.67

Fat Bob-Style Gas Tanks — 13.2 L (3.5 US gal.), Silver

-€73.82
Out of Stock

DRAG SPECIALTIES Fat Bob-Style Gas Tanks — 13.2 L (3.5 US gal.), Silver

Reproduction Fat Bob-style gas tanks offering classic looks; check fitment notes for cap and petcock compatibility.

€208.61 €282.43

-€25.50
Out of Stock

DRAG SPECIALTIES [object Object]

Complete Kickstand Kit with standard-length kickstand, welded brackets, bumper, spring, pivot pin with bushings, and retainer clip for easy replacement and stable parking.

€72.08 €97.58

Rubber-Mount Quickbob™ Gas Tank — 13.6 L (3.6 US gal), Fatbob, raw steel

-€93.48
Out of Stock

DRAG SPECIALTIES Rubber-Mount Quickbob™ Gas Tank — 13.6 L (3.6 US gal), Fatbob,...

One-piece 3.6-gallon replica of the Harley Fat Bob tank with rubber mount brackets; ships unpainted, caps not included.

€264.18 €357.66

-€18.59
Out of Stock

DRAG SPECIALTIES [object Object]

High-strength steel kickstand that replaces OEM units. Under-stock length available for lowered suspension. Measurement for Big Twin, Softail, FLT and XL is from the first bend at the top to the first bend at the bottom.

€52.52 €71.11

-€18.32
Out of Stock

DRAG SPECIALTIES [object Object]

High-strength steel kickstand; direct OEM replacement; under-stock length for lowered suspension; measurement guidance for Big Twin, Softail, FLT and XL.

€51.77 €70.09

2" Extended Two-Piece Flat-Side Gas Tank Set — 5.2 US gal, raw finish

-€105.89
Out of Stock

DRAG SPECIALTIES 2" Extended Two-Piece Flat-Side Gas Tank Set — 5.2 US gal, raw...

Fully functional 2" extended two-piece flatside gas tank. Unfinished surface; accepts stock-style speedometer and dash. 5.2-gallon style; caps sold separately. Contoured to fit most seats.

€299.25 €405.14

Tire Hugger Series Front Fenders for Dressers — 6.5" fender, 23" wheel, raked, black

-€83.00
Out of Stock

KLOCK WERKS Tire Hugger Series Front Fenders for Dressers — 6.5" fender,...

Steel construction adds rigidity; pre-drilled and stamped for consistent finish; e-coated for corrosion resistance; includes zinc-plated hardware; made in USA.

€322.80 €405.80

shop by category

Body & Frame

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Contact us

Products

Our company

shop by category

Body & Frame  

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Body & Frame