Body & Frame (3)

-€124.72
Out of Stock

DRAG SPECIALTIES One-Piece Extended Gas Tank — 19.3 L (5.1 US gal), extended 2 in

5.1-gallon one-piece extended tank, unpainted. Seat nose may require modification; caps not included.

€352.43 €477.15

-€149.45
Out of Stock

DRAG SPECIALTIES One-Piece Extended Gas Tank — 5.1-gallon, 2" extended, Raw

Extended one-piece gas tank with stamped-steel construction. Ships unpainted; seat nose or sending unit may require modification. Pressure-test and seal before painting.

€422.39 €571.84

One-Piece 2" Extended Gas Tank — 4.2 US gal, 22 mm outlet, Raw

-€104.79
Out of Stock

DRAG SPECIALTIES One-Piece 2" Extended Gas Tank — 4.2 US gal, 22 mm outlet, Raw

One-piece, bolt-on 2" extended gas tank. Approximately 4.2 gallons; accepts late-style 22 mm petcock. Seat nose may require modification; custom gauge mounting required.

€296.17 €400.96

OEM Rear Fender — 18.5 cm (7-1/4") width, unfinished

-€31.07
Out of Stock

DRAG SPECIALTIES OEM Rear Fender — 18.5 cm (7-1/4") width, unfinished

Direct OEM replacement rear fender; raw stamped-steel, pre-drilled to accept OE components and taillight assembly.

€87.80 €118.87

-€1.88
Out of Stock

DRAG SPECIALTIES Replacement Gas Tank Bung — Weld-In, Chrome

Weld-in bung for custom fuel-tank filler mounting; accepts '84-E'96 screw-in gas caps.

€5.32 €7.20

-€25.69
Out of Stock

DRAG SPECIALTIES FXR Rear Fender — Unfinished, steel

Raw steel rear fender, pre-drilled for OEM fender struts, license plate mounts and taillight.

€72.60 €98.29

-€8.71
Out of Stock

DRAG SPECIALTIES Tank Trim — Chrome, Black, Bolt-On

Polished center panel for split tanks; replaces the stock center panel.

€24.65 €33.36

One-Piece Smooth-Top Style Extended Gas Tank — 22-1/2" L × 16" W, 15.1 L (4 US gal), Raw

-€85.48
Out of Stock

DRAG SPECIALTIES One-Piece Smooth-Top Style Extended Gas Tank — 22-1/2" L × 16"...

One-piece smooth-top extended gas tank that eliminates the dash and adds approximately 4 gallons of capacity. Includes necessary mounting hardware; '96-'99 require pre-'96 petcock.

€241.55 €327.03

Screw-In Gas Cap — Vented, Early style, Chrome

-€4.64
Out of Stock

DRAG SPECIALTIES Screw-In Gas Cap — Vented, Early style, Chrome

Provides a screw-in closure with a provision for evaporative emissions control equipment to support reliable fuel system operation.

€13.13 €17.77

-€30.18
Out of Stock

DRAG SPECIALTIES Rear Fender — Unfinished steel

Predrilled rear fender for OEM fender struts and license plate mount; ships ready for custom finishing.

€85.30 €115.48

-€4.64
Out of Stock

DRAG SPECIALTIES Screw-In Gas Cap — Non-vented, Chrome

Screw-In Gas Cap with provision for evaporative emissions control equipment; screw-in installation provides a secure fuel-tank seal.

€13.13 €17.77

-€30.18
Out of Stock

DRAG SPECIALTIES Rear Fender — Unfinished steel

Pre-drilled for OEM fender struts and license plate mount. Ready for custom finishing.

€85.30 €115.48

Gas Tank with Chrome Aero-Style Gas Cap — 3.3 gal (12.5 L), 22 mm outlet, chrome

-€85.48
Out of Stock

DRAG SPECIALTIES Gas Tank with Chrome Aero-Style Gas Cap — 3.3 gal (12.5 L), 22...

Rubber-mounted bolt-on flat-bottom tank with locking aero-style cap; ships unpainted and should be pressure tested and sealed before painting.

€241.55 €327.03

-€47.44
Out of Stock

DRAG SPECIALTIES Gas Tank — 3/8" NPT outlet, Carbureted, Raw

Durable replacement gas tank with reinforced seams, extra-strong mounting tabs and included hardware. Ships unpainted; caps not included.

€134.08 €181.52

WFB™ Benchmark Front Fender — 6-1/2" width, 26" wheel, Black, E-Coating

-€83.00
Out of Stock

KLOCK WERKS WFB™ Benchmark Front Fender — 6-1/2" width, 26" wheel, Black,...

Rivetless, pre-drilled front fender with an extended 1.5" rear tail; pairs with WFB™ rear fender. Made in USA.

€322.80 €405.80

-€50.25
Out of Stock

DRAG SPECIALTIES Gas Tank — 22 mm outlet, bolt-on mount, raw finish

Heavy-gauge construction with reinforced seams. Includes strong mounting tabs and hardware. Shipped unpainted; caps not included. Must be fitted, pressure-tested and sealed before painting.

€142.00 €192.25

Benchmark Front Fender for Dresser — 6-1/2" wide, fits 16–19" wheels, black e-coating

-€90.55
Out of Stock

KLOCK WERKS Benchmark Front Fender for Dresser — 6-1/2" wide, fits 16–19"...

Durable stamped steel front fender with e-coating and chrome mounting blocks. Adaptable for custom applications. Made in the U.S.A.

€352.15 €442.70

Fat Bob-Style Gas Tank — 13.2 L (3.5 US gal), 22 mm outlet, Raw

-€63.90
Out of Stock

DRAG SPECIALTIES Fat Bob-Style Gas Tank — 13.2 L (3.5 US gal), 22 mm outlet, Raw

Fat Bob-style tank accepts stock dash and speedo equipment and fits standard late-model Harley petcocks.

€180.64 €244.54

-€71.96
Out of Stock

DRAG SPECIALTIES Fat Bob-Style Gas Tank — 18.9 L (5 US gal), 22 mm outlet, Raw

Classic Fat Bob styling with direct-fit compatibility for stock instrumentation and late-model Harley petcocks.

€203.38 €275.34

Fat Bob-Style Gas Tanks — 22.7 L (6 US gal.), Raw Silver

-€71.96
Out of Stock

DRAG SPECIALTIES Fat Bob-Style Gas Tanks — 22.7 L (6 US gal.), Raw Silver

Distinctive drawn-steel Fat Bob-style gas tanks; check cap compatibility for '84-E and '96-'99 fitments.

€203.38 €275.34

-€72.31
Out of Stock

DRAG SPECIALTIES Fat Bob-Style Gas Tank — 18.9 L (5 US gal.), 22 mm outlet, Raw

Fat Bob-style tank accepts stock dash and speedo equipment and is compatible with late-model Harley petcocks. Clean styling suited for custom builds and restorations.

€204.36 €276.67

Fat Bob-Style Gas Tanks — 13.2 L (3.5 US gal.), Silver

-€73.82
Out of Stock

DRAG SPECIALTIES Fat Bob-Style Gas Tanks — 13.2 L (3.5 US gal.), Silver

Reproduction Fat Bob-style gas tanks offering classic looks; check fitment notes for cap and petcock compatibility.

€208.61 €282.43

Rubber-Mount Quickbob™ Gas Tank — 13.6 L (3.6 US gal), Fatbob, raw steel

-€93.48
Out of Stock

DRAG SPECIALTIES Rubber-Mount Quickbob™ Gas Tank — 13.6 L (3.6 US gal), Fatbob,...

One-piece 3.6-gallon replica of the Harley Fat Bob tank with rubber mount brackets; ships unpainted, caps not included.

€264.18 €357.66

2" Extended Two-Piece Flat-Side Gas Tank Set — 5.2 US gal, raw finish

-€105.89
Out of Stock

DRAG SPECIALTIES 2" Extended Two-Piece Flat-Side Gas Tank Set — 5.2 US gal, raw...

Fully functional 2" extended two-piece flatside gas tank. Unfinished surface; accepts stock-style speedometer and dash. 5.2-gallon style; caps sold separately. Contoured to fit most seats.

€299.25 €405.14

Tire Hugger Series Front Fenders for Dressers — 6.5" fender, 23" wheel, raked, black

-€83.00
Out of Stock

KLOCK WERKS Tire Hugger Series Front Fenders for Dressers — 6.5" fender,...

Steel construction adds rigidity; pre-drilled and stamped for consistent finish; e-coated for corrosion resistance; includes zinc-plated hardware; made in USA.

€322.80 €405.80

Extended Dash-Style Rubber-Mount Quickbob® Tank Kit — Extended 2", 3.9 gal, rubber-mount kit

-€183.32
Out of Stock

DRAG SPECIALTIES Extended Dash-Style Rubber-Mount Quickbob® Tank Kit — Extended...

Extended dash-style Quickbob® tank kit with mounting brackets. Ships unpainted; caps not included. Fit and pressure-test before painting.

€518.08 €701.40

Tire Hugger Series Front Fenders for Dressers — 6-1/2" width, 23" wheel, black

-€83.00
Out of Stock

KLOCK WERKS Tire Hugger Series Front Fenders for Dressers — 6-1/2" width,...

Steel front hugger fenders that add rigidity and classic kustom styling. Stamped and pre-drilled for a consistent finish; e-coated and includes zinc-plated mounting hardware. Made in the U.S.A.

€322.80 €405.80

One-Piece 2" Extended Gas Tank — 15.9 L (4.2 gal), 22 mm outlet, Raw

-€109.34
Out of Stock

DRAG SPECIALTIES One-Piece 2" Extended Gas Tank — 15.9 L (4.2 gal), 22 mm...

One-piece 2" extended gas tank, approx. 4.2 gal capacity. Includes mounting hardware. Accepts 22 mm petcock. Seat may need modification; custom gauge mount required.

€309.00 €418.34

Tire Hugger Series Front Fenders for Dressers — 6-1/2" fender width, 23" wheel

-€83.00
Out of Stock

KLOCK WERKS Tire Hugger Series Front Fenders for Dressers — 6-1/2" fender...

Stamped steel front fenders, pre-drilled and E-coated for corrosion resistance. Includes zinc-plated mounting hardware. Made in the U.S.A.

€322.80 €405.80

Tire Hugger Series Front Fenders for Dressers — 6.5" fender, 26" wheel, raked frame, black

-€83.00
Out of Stock

KLOCK WERKS Tire Hugger Series Front Fenders for Dressers — 6.5" fender,...

Thick steel construction adds front-end rigidity
Pre-drilled and stamped for consistent finish
E-coated to prevent rust
Includes zinc-plated mounting hardware
Made in the U.S.A.

€322.80 €405.80

shop by category

Body & Frame

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Contact us

Products

Our company

shop by category

Body & Frame  

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Body & Frame