Body & Frame (3)

-€12.20

DRAG SPECIALTIES Pop-Up Gas Cap — 59.9 mm (2.36"), Black

Low-profile pop-up fuel cap; nearly flush fit, opens with a quarter-turn of the center; use OEM-style gasket for a positive seal.

€34.48 €46.68

Replacement Oil Line Seals — 6-pack, Black

-€1.47
Out of Stock

DRAG SPECIALTIES Replacement Oil Line Seals — 6-pack, Black

Replacement seals for stainless steel braided oil lines. Made in the USA.

€4.15 €5.62

Engine Oil Spout Kit — 323056, Black, Chrome

-€22.63

DRAG SPECIALTIES Engine Oil Spout Kit — 323056, Black, Chrome

Must-have for aftermarket hydraulic side covers, doors and actuators. Precision CNC-machined with a thread-in one-piece dipstick. Custom spout design and installation instructions included.

€63.97 €86.60

Custom Gas Tank — 11.4 L (3 US gal), tunnel 3", 20" L, 11" W, raw

-€49.54

DRAG SPECIALTIES Custom Gas Tank — 11.4 L (3 US gal), tunnel 3", 20" L, 11" W, raw

TIG-welded custom gas tank with chrome mounting hardware; deep tunnel and approximate 23" tab spacing; vented cap sold separately; must be sealed before use.

€140.00 €189.54

Rear Fender — 99 cm (39") contour, 18 cm (7-1/8") width, rear mount, E-Coating

-€123.26

KLOCK WERKS Rear Fender — 99 cm (39") contour, 18 cm (7-1/8") width, rear...

Pre-drilled to match stock mounting locations. Protective corrosion-resistant finish. Made in the USA.

€479.33 €602.59

Engine Oil Spout Kit — 6061-T6 aluminum, black or chrome finish

-€40.85

DRAG SPECIALTIES Engine Oil Spout Kit — 6061-T6 aluminum, black or chrome finish

Essential oil spout kit for aftermarket hydraulic side covers, doors and actuators. CNC-machined billet spout with thread-in one-piece dipstick to prevent blowout. Custom design fits most starters and bearing doors. Instructions included.

€115.47 €156.32

Lower Fillers — Saddlebag, detachable, unfinished

-€31.44

KLOCK WERKS Lower Fillers — Saddlebag, detachable, unfinished

Smooth filler panels that close the gap between the lower fender and saddlebags; includes hardware and installation instructions.

€122.24 €153.68

Engine Oil Spout Kit — 6061-T6 aluminum, Black, Silver

-€18.95

DRAG SPECIALTIES Engine Oil Spout Kit — 6061-T6 aluminum, Black, Silver

Secure, easy oil fill for aftermarket side covers and bearing doors. CNC-machined billet with a thread-in one-piece dipstick. Instructions included.

€53.57 €72.52

Custom Gas Tank — 11.4 L (3 US gal.), Tunnel 3", Raw finish

-€36.49

DRAG SPECIALTIES Custom Gas Tank — 11.4 L (3 US gal.), Tunnel 3", Raw finish

Peanut-style custom gas tank with chrome mounting hardware. Requires sealing prior to use.

€103.14 €139.63

-€113.20

KLOCK WERKS Rear Fender — Stock length, Rear, E-Coating

Pre-drilled to match stock mounting locations; heavy-gauge construction; corrosion-resistant finish; made in the USA.

€440.19 €553.39

-€22.63

DRAG SPECIALTIES Engine Oil Spout Kit — Black, Silver

Essential oil spout kit for aftermarket hydraulic side covers, doors and actuators. Includes a thread-in one-piece dipstick and installation instructions.

€63.97 €86.60

-€16.73

DRAG SPECIALTIES Skull Gas Cap — Black, Chrome, Screw-On, Pair

Bold skull-style gas cap for OEM replacement or custom builds. Cast aluminum construction.

€47.32 €64.05

-€33.31

DRAG SPECIALTIES Engine Oil Spout Kit — 6061-T6 aluminum, Black, Silver

Must-have for aftermarket hydraulic side covers, doors and actuators. CNC-machined billet design with a threaded one-piece dipstick; instructions included.

€94.14 €127.45

-€8.47

DRAG SPECIALTIES Skull Gas Cap — Black/Chrome, Screw-On

Skull-style gas cap for OEM replacement and custom builds. Cast aluminum construction. Sold individually.

€23.92 €32.39

-€8.06

DRAG SPECIALTIES Gas Tank Knee Pads — black, pair

Sold as pair. Adds knee-area grip and protects tank contact points. Low-profile and easy to apply.

€22.80 €30.86

-€6.54

DRAG SPECIALTIES Gas Tank Knee Pads — Black, Pair

Durable, non-slip protection for knee contact points; low-profile design and easy adhesive installation.

€18.50 €25.04

Original-Style Gas Cap — Vented, Black, Big Twin, XL

-€2.60

DRAG SPECIALTIES Original-Style Gas Cap — Vented, Black, Big Twin, XL

Replacement gas cap for OEM and custom tanks. Will not fit screw-in type tanks. Verify fitment before purchase.

€7.35 €9.95

Original-Style Gas Cap — Big Twin, XL, Non-vented, Black gloss

-€2.12
Out of Stock

DRAG SPECIALTIES Original-Style Gas Cap — Big Twin, XL, Non-vented, Black gloss

Replacement gas cap for OEM and custom tanks. Will not fit screw-in type tanks.

€5.99 €8.11

Hugger Series Front Fender — Fits 16" , 17" , 18" , 19" wheels, Black, 30-1/2" contour

-€75.46

KLOCK WERKS Hugger Series Front Fender — Fits 16" , 17" , 18" , 19"...

Stamped, pre-drilled construction for consistent fit
E-coated finish for corrosion resistance
Adds front-end rigidity while allowing custom shaping
Made in the USA; mounting blocks sold separately

€293.45 €368.91

Original-Style Gas Cap — Big Twin, XL, Black

-€2.60

DRAG SPECIALTIES Original-Style Gas Cap — Big Twin, XL, Black

Replacement gas cap for OEM and custom tanks. Not compatible with screw-in type tanks.

€7.35 €9.95

-€3.20

DRAG SPECIALTIES Bezel Dipstick — Black

Restores a clean finish around the dipstick opening; includes replacement push nut for installation.

€9.06 €12.26

Original-Style Gas Cap — Non-Vented, Big Twin & XL, Matte black

-€2.12

DRAG SPECIALTIES Original-Style Gas Cap — Non-Vented, Big Twin & XL, Matte black

Replacement gas cap for OEM and custom tanks. Will not fit screw-in type tanks.

€5.99 €8.11

-€14.02

DRAG SPECIALTIES Kickstand — 254 mm (10"), shortens 25.4 mm (1"), Chrome

High-strength steel kickstand; direct OEM replacement; under-stock length for lowered suspension; measured between the first bends on Big Twin, Softail, FLT and XL.

€39.64 €53.66

-€5.14

DRAG SPECIALTIES Frame Inserts — Chrome, Set

Four-piece steel insert set for Softail frames; secured with special adhesive tape; fits recessed frame areas.

€14.51 €19.65

Hugger Series Front Fender — 5-7/8" width, 21" wheel, Black

-€75.46

KLOCK WERKS Hugger Series Front Fender — 5-7/8" width, 21" wheel, Black

Thick, rigid design can be cut or shaped for a custom look.

Pre-drilled and stamped for consistent fit and reduced body work.

Electrocoated finish for corrosion resistance. Requires Tire Hugger mounting blocks (sold separately).

€293.45 €368.91

-€15.35

ALLOY ART Premium Fuel Tank Mounting Bushings — Aluminum, Weld-In, 6-pack

Durable polyurethane bushings for fuel tank mounting; chemical- and weather-resistant replacement for rubber mounts. Made in the USA.

€43.40 €58.75

-€1.81

DRAG SPECIALTIES Oversized Drain Plug — Black, Silver

Durable engine oil drain plug designed as a direct replacement; includes O-ring for a secure seal.

€5.14 €6.95

Premium Fuel Tank Mounting Bushings — Fuel tank, weld-in, 10 pack, aluminum

-€32.97

ALLOY ART Premium Fuel Tank Mounting Bushings — Fuel tank, weld-in, 10...

Gooden-Tight bushings feature injection-molded high-grade polyurethane with a two-piece air-pocketed design. Chemical- and weather-resistant; mounts like rubber but resists cracking and breakdown. Made in the USA.

€93.16 €126.13

-€39.50

DRAG SPECIALTIES Rear Fender — Steel, Unfinished

Predrilled for OEM fender struts and license plate mount; ready for custom finishing.

€111.65 €151.15

-€51.16
Out of Stock

DRAG SPECIALTIES Replacement Oil Tank — 3 qt, Chrome

Includes drain/fill plugs, cap assembly and gasket. Approx. 3 qt capacity.

€144.59 €195.75

shop by category

Body & Frame

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Contact us

Products

Our company