Body & Frame (3)

2" Extended Two-Piece Flat-Side Gas Tank Set — 5.2 US gal, raw finish

-€105.89
Out of Stock

DRAG SPECIALTIES 2" Extended Two-Piece Flat-Side Gas Tank Set — 5.2 US gal, raw...

Fully functional 2" extended two-piece flatside gas tank. Unfinished surface; accepts stock-style speedometer and dash. 5.2-gallon style; caps sold separately. Contoured to fit most seats.

€299.25 €405.14

Tire Hugger Series Front Fenders for Dressers — 6.5" fender, 23" wheel, raked, black

-€83.00
Out of Stock

KLOCK WERKS Tire Hugger Series Front Fenders for Dressers — 6.5" fender,...

Steel construction adds rigidity; pre-drilled and stamped for consistent finish; e-coated for corrosion resistance; includes zinc-plated hardware; made in USA.

€322.80 €405.80

Extended Dash-Style Rubber-Mount Quickbob® Tank Kit — Extended 2", 3.9 gal, rubber-mount kit

-€183.32
Out of Stock

DRAG SPECIALTIES Extended Dash-Style Rubber-Mount Quickbob® Tank Kit — Extended...

Extended dash-style Quickbob® tank kit with mounting brackets. Ships unpainted; caps not included. Fit and pressure-test before painting.

€518.08 €701.40

Tire Hugger Series Front Fenders for Dressers — 6-1/2" width, 23" wheel, black

-€83.00
Out of Stock

KLOCK WERKS Tire Hugger Series Front Fenders for Dressers — 6-1/2" width,...

Steel front hugger fenders that add rigidity and classic kustom styling. Stamped and pre-drilled for a consistent finish; e-coated and includes zinc-plated mounting hardware. Made in the U.S.A.

€322.80 €405.80

One-Piece 2" Extended Gas Tank — 15.9 L (4.2 gal), 22 mm outlet, Raw

-€109.34
Out of Stock

DRAG SPECIALTIES One-Piece 2" Extended Gas Tank — 15.9 L (4.2 gal), 22 mm...

One-piece 2" extended gas tank, approx. 4.2 gal capacity. Includes mounting hardware. Accepts 22 mm petcock. Seat may need modification; custom gauge mount required.

€309.00 €418.34

Tire Hugger Series Front Fenders for Dressers — 6-1/2" fender width, 23" wheel

-€83.00
Out of Stock

KLOCK WERKS Tire Hugger Series Front Fenders for Dressers — 6-1/2" fender...

Stamped steel front fenders, pre-drilled and E-coated for corrosion resistance. Includes zinc-plated mounting hardware. Made in the U.S.A.

€322.80 €405.80

Tire Hugger Series Front Fenders for Dressers — 6.5" fender, 26" wheel, raked frame, black

-€83.00
Out of Stock

KLOCK WERKS Tire Hugger Series Front Fenders for Dressers — 6.5" fender,...

Thick steel construction adds front-end rigidity
Pre-drilled and stamped for consistent finish
E-coated to prevent rust
Includes zinc-plated mounting hardware
Made in the U.S.A.

€322.80 €405.80

Extended Smooth-Top QuickBob™ Rubber-Mount Gas Tank — 3.9 US gal, 22 mm outlet

-€109.34
Out of Stock

DRAG SPECIALTIES Extended Smooth-Top QuickBob™ Rubber-Mount Gas Tank — 3.9 US...

Extended QuickBob™ gas tank with seat-nose cutout; includes mounting brackets. Shipped unpainted; caps not included.

€309.00 €418.34

Tire Hugger Series Front Fenders for Dressers — 6.5" (16.5 cm), 26" wheel, Raked

-€83.00
Out of Stock

KLOCK WERKS Tire Hugger Series Front Fenders for Dressers — 6.5" (16.5...

Thick steel construction for added rigidity. Pre-drilled, stamped design. E-coated finish. 6.5" outside width. Includes zinc-plated hardware. Made in the U.S.A.

€322.80 €405.80

Extended Smooth-Top QuickBob™ Rubber-Mount Gas Tank — 3.9 US gal, 22 mm outlet, raw finish

-€86.83
Out of Stock

DRAG SPECIALTIES Extended Smooth-Top QuickBob™ Rubber-Mount Gas Tank — 3.9 US...

Extended QuickBob™ smooth-top rubber-mount fuel tank with a flowing profile, rear seat cutout and included mounting brackets. Ships unpainted; caps not included.

€245.42 €332.25

Tire Hugger Series Front Fenders for Dressers — 6.5" width, 26" wheel

-€83.00
Out of Stock

KLOCK WERKS Tire Hugger Series Front Fenders for Dressers — 6.5" width,...

Durable steel front fender for dressers, pre-drilled and e-coated to resist rust; includes zinc-plated mounting hardware.

€322.80 €405.80

-€4.94
Out of Stock

DRAG SPECIALTIES Custom Bolt Kit for Flat Side Tanks — Chrome, Aluminum, Flatside

Replaces front OEM gas tank mounting bolts. Includes four 5/16"-18 x 3/4" flathead Allen bolts with recessed washers.

€13.95 €18.89

-€13.78
Out of Stock

DRAG SPECIALTIES Custom One-Piece Gas Tank Mounting Kit — Black, Chrome, Bolt-On

Complete kit with front and rear tank mounts, rubber grommets and all necessary hardware for installation.

€38.97 €52.75

Tire Hugger Series Front Fenders for Dressers — 6.5" width, fits 23" wheel, Black, E-Coating

-€100.62
Out of Stock

KLOCK WERKS Tire Hugger Series Front Fenders for Dressers — 6.5" width,...

Heavy-gauge steel front fenders for Dressers — pre-drilled and stamped, e-coated, includes zinc-plated mounting hardware, made in USA.

€391.28 €491.90

Tire Hugger Series Front Fenders for Dressers — 6.5" width, 26" wheel, raked frame fit, Black

-€100.62
Out of Stock

KLOCK WERKS Tire Hugger Series Front Fenders for Dressers — 6.5" width,...

Steel Tire Hugger front fenders for Dressers — pre-drilled and stamped, E-coated, includes zinc-plated mounting hardware. Made in the U.S.A.

€391.28 €491.90

Tire Hugger Series Front Fenders for Dressers — 6.5" width, 26" wheel, raked frame, Black

-€100.62
Out of Stock

KLOCK WERKS Tire Hugger Series Front Fenders for Dressers — 6.5" width,...

Thick stamped steel front fenders — pre-drilled, e-coated to resist rust, 6.5" outside width. Includes zinc-plated mounting hardware. Made in the U.S.A.

€391.28 €491.90

-€85.47
Out of Stock

PAUL YAFFE BAGGER NATION DEI Front Fender — 21", steel, e-coated

Modern redesign of the classic Yaffe fender
Lengthened front and rear, thicker sidewalls
Single-piece 14-gauge steel, no welds
Pre-drilled; satin and black adapters included
E-coated finish; made in the USA

€332.35 €417.82

$DEI Front Fender — 23\", steel, E-Coating$

-€96.44
Out of Stock

PAUL YAFFE BAGGER NATION DEI Front Fender — 23\", steel, E-Coating

Redesigned Yaffe-style front fender with extended coverage, pre-drilled mounting, and satin and black adapters included.

€375.06 €471.50

-€96.44
Out of Stock

PAUL YAFFE BAGGER NATION DEI Front Fender — 26", E-coating

Complete redesign of the classic Yaffe front fender; lengthened front and rear, thickened sidewalls, 14-gauge steel, pre-drilled, e-coated finish; includes satin and black adapters.

€375.06 €471.50

-€96.44
Out of Stock

PAUL YAFFE BAGGER NATION Talon Front Fender — 26" wheel, raw finish

Radical claw-shaped front fender in 14-gauge steel with e-coated protection. Pre-drilled for easy installation; satin-finish spacer included. Made in the USA.

€375.06 €471.50

Thicky Front Fender — 26" wheel, Natural finish

-€96.44
Out of Stock

PAUL YAFFE BAGGER NATION Thicky Front Fender — 26" wheel, Natural finish

Redesigned one-piece 14-gauge front fender with squared ends and thicker sidewalls; pre-drilled and direct bolt-on, ships ready to finish.

€375.06 €471.50

The One Rear Fender — 8.625" wide, Black

-€148.41
Out of Stock

KLOCK WERKS The One Rear Fender — 8.625" wide, Black

Frenched rear fender with integrated bag-to-fender filler panels. Stamped 14-gauge steel construction, filler panels TIG welded. Accepts stock detachable mounting hardware. Made in USA.

€577.16 €725.57

-€85.47
Out of Stock

PAUL YAFFE BAGGER NATION DEI Front Fender — 21", E-coated, Unfinished

Complete redesign of the classic Yaffe fender — one-piece 14-gauge steel, pre-drilled, E-coated. Satin and black adapters included.

€332.35 €417.82

-€96.44
Out of Stock

PAUL YAFFE BAGGER NATION DEI Front Fender — 23", Unfinished

Redesigned DEI front fender: one-piece 14-gauge steel, pre-drilled, E-coated; satin and black adapters included. Made in USA.

€375.06 €471.50

-€96.44
Out of Stock

PAUL YAFFE BAGGER NATION DEI Front Fender — 26", unfinished, E-coating

Complete Yaffe redesign with lengthened front/rear, thickened sidewalls, single-piece 14-gauge construction; pre-drilled and includes satin and black adapters.

€375.06 €471.50

-€91.34
Out of Stock

PAUL YAFFE BAGGER NATION Talon Front Fender — 21" wheel, e-coating

Radically styled Talon front fender with pre-drilled mounting and included satin-finish spacer. Made in the USA.

€355.26 €446.60

Talon Front Fender — 23", black, e-coated

-€96.44
Out of Stock

PAUL YAFFE BAGGER NATION Talon Front Fender — 23", black, e-coated

Radical claw-shaped front fender; 14-gauge steel, pre-drilled for installation; e-coated finish; satin spacer included; made in USA.

€375.06 €471.50

Talon Front Fender — 26" wheel, front, e-coating

-€96.44
Out of Stock

PAUL YAFFE BAGGER NATION Talon Front Fender — 26" wheel, front, e-coating

Radically styled front fender with 14-gauge steel construction, pre-drilled for installation, e-coated finish and satin-finish spacer included. Made in the USA.

€375.06 €471.50

-€96.44
Out of Stock

PAUL YAFFE BAGGER NATION Thicky Front Fender — 23", Natural

Redesigned one-piece 14-gauge steel front fender with squared ends and thicker sidewalls; pre-drilled, direct bolt-on, comes in natural finish with satin spacers included.

€375.06 €471.50

-€96.44
Out of Stock

PAUL YAFFE BAGGER NATION Thicky Front Fender — 26" wheel, front, natural finish

Lengthened, one-piece 14-gauge steel front fender with pre-drilled direct bolt-on fit; includes satin spacers and arrives ready for primer and paint.

€375.06 €471.50

shop by category

Body & Frame

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Contact us

Products

Our company

shop by category

Body & Frame  

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Body & Frame