Body & Frame (3)

DRAG SPECIALTIES Heavy-Duty Front Fender — Unfinished, front

Heavy-duty construction, raw finish, pre-drilled for OEM hardware, smooth style without trim holes.

€118.08

DRAG SPECIALTIES Screw-In Locking Skull Gas Cap — Chrome

Hidden key slot under the skull keeps dirt out of the lock; two keys included.

€34.27

TECMATE [object Object]

Heat-resistant ABS puck that spreads the load and stabilizes the side stand on soft or hot surfaces. Oval shape with splash-guard rim and 5 mm tether hole. 14 x 12 cm.

€6.33

DRAG SPECIALTIES Heavy-Duty Front Fender — Front, Unfinished steel

Rugged, pre-drilled front fender with a smooth profile—no holes for trim, fender tip, or skirt. Raw finish and straightforward OEM installation.

€102.76

DRAG SPECIALTIES [object Object]

Durable kickstand spring; measured from hook to hook to ensure correct fit.

€3.14

DRAG SPECIALTIES 6" Front Fender — front mount, 7-1/2" inside mounting width

Raw stamped steel front fender; measures approx. 6" W (inside). Mounts with OE hardware. Requires lower fender skirt if trim holes are present.

€76.33

DRAG SPECIALTIES Screw-In Locking Skull Gas Cap — Black, vented

Screw-In Locking Skull Gas Cap with hidden key slot and two keys included. Screw-in installation for easy replacement.

€33.19

DRAG SPECIALTIES [object Object]

Durable replacement kickstand spring measured hook-to-hook for accurate fit and reliable tension.

€2.90

6" Front Fender — 6" inside width, front mount, with trim holes, unfinished

DRAG SPECIALTIES 6" Front Fender — 6" inside width, front mount, with trim...

Raw stamped steel front fender; mounts with OE hardware. Fenders with trim holes require lower fender skirt.

€76.33

DRAG SPECIALTIES [object Object]

Direct-fit kickstand spring. Springs are measured from hook to hook.

€4.60

DRAG SPECIALTIES OEM Rear Fender — 7-1/4" (18.5 cm), Unfinished

Direct OEM replacement rear fender; pre-drilled, accepts OE components and taillight assembly, and fits original fender struts and mounting hardware.

€40.86

LA CHOPPERS Vented Gas Cap with Weld-On Bung — 1-5/8" diameter, Aluminum

Easy weld-in vented gas cap with knurled aluminum cap, right-hand thread, and included weld-on bung.

€39.75

DRAG SPECIALTIES [object Object]

Replacement kickstand spring measured from hook to hook. High-tensile steel with corrosion-resistant finish. Verify fitment before purchase.

€3.51

DRAG SPECIALTIES [object Object]

Replacement kickstand spring. Springs are measured from hook to hook for accurate fit.

€3.66

DRAG SPECIALTIES Custom Rear Fender — 77 cm L x 18 cm W, Unfinished

Raw steel rear fender; not pre-drilled and no taillight or license plate mount. Measures approx 30" L x 7-1/8" W. Each.

€53.94

DRAG SPECIALTIES [object Object]

Durable kickstand spring measured from hook to hook for reliable operation and easy replacement.

€3.43

DRAG SPECIALTIES Rear Fender — Unfinished, raw steel

Predrilled for OEM fender struts and license plate mount. Raw steel finish ready for customization.

€69.65

DRAG SPECIALTIES Split Skull Gas Cap — Chrome, vented

Distinctive Split Skull styling for the fuel area; easy installation and secure closure.

€34.06

DRAG SPECIALTIES [object Object]

Kickstand extension that makes hard-to-reach kickstands easier to operate. Includes mounting hardware. Drilling required.

€18.49

DRAG SPECIALTIES Rear Fender — Raw finish, rear mount

Raw steel finish; predrilled for OEM fender struts and license plate mount. Sold each.

€72.67

DRAG SPECIALTIES [object Object]

Extension plate that makes hard-to-reach kickstands easier to operate; includes mounting hardware; drilling required.

€18.49

ARLEN NESS Wrapper Front Fender — 26" Black

Race-inspired, lightweight composite fender with direct bolt-on fitment. Made in the U.S.A.

€134.31

DRAG SPECIALTIES [object Object]

Rubber bumper that clips to the round frame tube under the primary cover — ideal for custom applications.

€5.84

Benchmark Front Fender for Dresser — 6.5" fender, 21" wheel fit, non-raked frame, black

KLOCK WERKS Benchmark Front Fender for Dresser — 6.5" fender, 21" wheel...

Durable front fender stamped from heavy U.S. steel with chrome mounting blocks; suitable for Dresser-style applications and custom builds. Made in the U.S.A.

€312.15

DRAG SPECIALTIES [object Object]

Replacement brass bushings for kickstand — durable, corrosion‑resistant and easy to install.

€5.05

Benchmark Front Fender for Dresser — 6-1/2" Fender, 26" wheel fit, raked frame, Black

KLOCK WERKS Benchmark Front Fender for Dresser — 6-1/2" Fender, 26" wheel...

Stamped 14-gauge steel front fender, E-coated for corrosion resistance, includes chrome mounting blocks. Made in the U.S.A.

€241.38

KURYAKYN Push-Button Fuel Door Latch — Black

Direct replacement for the key-lock fuel door latch; opens the cap with a simple push of the button.

€37.33

Tire Hugger Front Fender for Dresser — 16" ,17" ,18" ,19" wheels, 39-1/2" contour, Black E-Coating

KLOCK WERKS Tire Hugger Front Fender for Dresser — 16" ,17" ,18" ,19"...

Stamped 14-gauge steel front fender with 13-step E-coated finish; laser cut and pre-drilled for precise fit. Includes mounting blocks and hardware.

€312.15

DRAG SPECIALTIES Screw-In Locking Gas Cap — Screw cap, vented, black gloss

Locking gas cap that deters theft and tampering. Swing-away lock cover and two keys included.

€19.18

$Tire Hugger Front Fender for Dresser — Fits 16\", 17\", 18\", 19\" wheels, Black E-Coating$

KLOCK WERKS Tire Hugger Front Fender for Dresser — Fits 16\", 17\", 18\",...

Stamped 14‑gauge steel front tire hugger with 13‑step e‑coated finish; laser cut and pre‑drilled. Includes mounting blocks and hardware. Made in the USA.

€312.15

shop by category

Body & Frame

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Contact us

Products

Our company

shop by category

Body & Frame  

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Body & Frame