Body & Frame (2)

Hugger Series Front Fender — 4-1/2" wide, 21" wheel, inside mount 4-1/4", E-Coating, Black

-€75.46
Out of Stock

KLOCK WERKS Hugger Series Front Fender — 4-1/2" wide, 21" wheel, inside...

Thick, pre-drilled stamped front fender with a corrosion-resistant electrocoat. Made in the USA. Requires Tire Hugger mounting blocks (sold separately).

€293.45 €368.91

-€27.90
Out of Stock

DRAG SPECIALTIES 6" Front Fender — 6" W, 7-1/4" inside mount, Unfinished

Raw stamped steel front fender; mounts with OE hardware. Trim-hole models require a lower fender skirt.

€78.85 €106.75

-€1.02
Out of Stock

DRAG SPECIALTIES [object Object]

Kickstand spring. Springs are measured from hook to hook. Check fitment before installation.

€2.87 €3.89

OEM Rear Fender — 18.5 cm (7-1/4") width, unfinished

-€31.07
Out of Stock

DRAG SPECIALTIES OEM Rear Fender — 18.5 cm (7-1/4") width, unfinished

Direct OEM replacement rear fender; raw stamped-steel, pre-drilled to accept OE components and taillight assembly.

€87.80 €118.87

-€25.69
Out of Stock

DRAG SPECIALTIES FXR Rear Fender — Unfinished, steel

Raw steel rear fender, pre-drilled for OEM fender struts, license plate mounts and taillight.

€72.60 €98.29

-€9.26
Out of Stock

DRAG SPECIALTIES [object Object]

Kickstand extension that makes hard-to-reach kickstands easier to operate. Includes mounting hardware. Drilling required.

€26.16 €35.42

-€30.18
Out of Stock

DRAG SPECIALTIES Rear Fender — Unfinished steel

Predrilled rear fender for OEM fender struts and license plate mount; ships ready for custom finishing.

€85.30 €115.48

-€9.46
Out of Stock

DRAG SPECIALTIES [object Object]

Increases kickstand surface area for easier use and better stability. Includes mounting hardware; drilling required for installation.

€26.74 €36.20

-€30.18
Out of Stock

DRAG SPECIALTIES Rear Fender — Unfinished steel

Pre-drilled for OEM fender struts and license plate mount. Ready for custom finishing.

€85.30 €115.48

-€18.62
Out of Stock

DRAG SPECIALTIES [object Object]

Polished chrome kickstand kits with spring tab, leg stop and spring. Available in standard and undersize lengths.

€52.63 €71.25

-€17.41
Out of Stock

DRAG SPECIALTIES [object Object]

Polished chrome kickstand kits with spring tab, leg stop and spring; available in standard and undersize lengths.

€49.19 €66.60

WFB™ Benchmark Front Fender — 6-1/2" width, 26" wheel, Black, E-Coating

-€83.00
Out of Stock

KLOCK WERKS WFB™ Benchmark Front Fender — 6-1/2" width, 26" wheel, Black,...

Rivetless, pre-drilled front fender with an extended 1.5" rear tail; pairs with WFB™ rear fender. Made in USA.

€322.80 €405.80

-€23.42
Out of Stock

DRAG SPECIALTIES [object Object]

Complete kickstand kit includes polished chrome kickstand with spring tab, leg stop and spring; available in standard and undersize lengths.

€66.17 €89.59

-€29.31
Out of Stock

DRAG SPECIALTIES [object Object]

Polished chrome kickstand kits with spring tab, leg stop and spring (unless noted). Available in standard and undersize lengths.

€82.83 €112.14

Benchmark Front Fender for Dresser — 6-1/2" wide, fits 16–19" wheels, black e-coating

-€90.55
Out of Stock

KLOCK WERKS Benchmark Front Fender for Dresser — 6-1/2" wide, fits 16–19"...

Durable stamped steel front fender with e-coating and chrome mounting blocks. Adaptable for custom applications. Made in the U.S.A.

€352.15 €442.70

-€2.14
Out of Stock

DRAG SPECIALTIES [object Object]

Durable rubber bumper that clips to the round frame tube under the primary cover; ideal for custom applications.

€6.03 €8.17

-€17.72
Out of Stock

DRAG SPECIALTIES [object Object]

High-strength steel kickstand; direct OEM replacement; under-stock lengths for lowered suspension; measurement guidance for Big Twin, Softail, FLT and XL.

€50.08 €67.80

-€17.72
Out of Stock

DRAG SPECIALTIES [object Object]

Durable high-strength steel kickstand — direct OEM replacement. Under-stock lengths available for lowered suspension; measured from the first top bend to the first bottom bend for Big Twin, Softail, FLT and XL.

€50.08 €67.80

-€18.62
Out of Stock

DRAG SPECIALTIES [object Object]

High-strength steel kickstand that replaces OEM units with a precise fit. Suitable for bikes with lowered suspension when using under-stock length options. Measurement method applies to Big Twin, Softail, FLT and XL models.

€52.63 €71.25

-€25.50
Out of Stock

DRAG SPECIALTIES [object Object]

Complete Kickstand Kit with standard-length kickstand, welded brackets, bumper, spring, pivot pin with bushings, and retainer clip for easy replacement and stable parking.

€72.08 €97.58

-€18.59
Out of Stock

DRAG SPECIALTIES [object Object]

High-strength steel kickstand that replaces OEM units. Under-stock length available for lowered suspension. Measurement for Big Twin, Softail, FLT and XL is from the first bend at the top to the first bend at the bottom.

€52.52 €71.11

-€18.32
Out of Stock

DRAG SPECIALTIES [object Object]

High-strength steel kickstand; direct OEM replacement; under-stock length for lowered suspension; measurement guidance for Big Twin, Softail, FLT and XL.

€51.77 €70.09

Tire Hugger Series Front Fenders for Dressers — 6.5" fender, 23" wheel, raked, black

-€83.00
Out of Stock

KLOCK WERKS Tire Hugger Series Front Fenders for Dressers — 6.5" fender,...

Steel construction adds rigidity; pre-drilled and stamped for consistent finish; e-coated for corrosion resistance; includes zinc-plated hardware; made in USA.

€322.80 €405.80

-€15.61
Out of Stock

DRAG SPECIALTIES [object Object]

High-strength steel kickstand; direct OEM replacement. Under-stock lengths for lowered suspension. Measure Big Twin, Softail, FLT and XL from first top bend to first bottom bend.

€44.14 €59.75

Tire Hugger Series Front Fenders for Dressers — 6-1/2" width, 23" wheel, black

-€83.00
Out of Stock

KLOCK WERKS Tire Hugger Series Front Fenders for Dressers — 6-1/2" width,...

Steel front hugger fenders that add rigidity and classic kustom styling. Stamped and pre-drilled for a consistent finish; e-coated and includes zinc-plated mounting hardware. Made in the U.S.A.

€322.80 €405.80

Tire Hugger Series Front Fenders for Dressers — 6-1/2" fender width, 23" wheel

-€83.00
Out of Stock

KLOCK WERKS Tire Hugger Series Front Fenders for Dressers — 6-1/2" fender...

Stamped steel front fenders, pre-drilled and E-coated for corrosion resistance. Includes zinc-plated mounting hardware. Made in the U.S.A.

€322.80 €405.80

-€13.47
Out of Stock

DRAG SPECIALTIES [object Object]

High-strength steel kickstand that replaces OEM units for a precise fit. Under-stock length is for bikes with lowered suspension. Measured from the first bend at the top to the first bend at the bottom on Big Twin, Softail, FLT and XL models.

€38.07 €51.54

Tire Hugger Series Front Fenders for Dressers — 6.5" fender, 26" wheel, raked frame, black

-€83.00
Out of Stock

KLOCK WERKS Tire Hugger Series Front Fenders for Dressers — 6.5" fender,...

Thick steel construction adds front-end rigidity
Pre-drilled and stamped for consistent finish
E-coated to prevent rust
Includes zinc-plated mounting hardware
Made in the U.S.A.

€322.80 €405.80

-€12.78
Out of Stock

DRAG SPECIALTIES [object Object]

High-strength steel kickstand. Direct-fit OEM replacement. Under-stock length available for lowered suspension. Measurement: from first top bend to first bottom bend.

€36.16 €48.94

Tire Hugger Series Front Fenders for Dressers — 6.5" (16.5 cm), 26" wheel, Raked

-€83.00
Out of Stock

KLOCK WERKS Tire Hugger Series Front Fenders for Dressers — 6.5" (16.5...

Thick steel construction for added rigidity. Pre-drilled, stamped design. E-coated finish. 6.5" outside width. Includes zinc-plated hardware. Made in the U.S.A.

€322.80 €405.80

shop by category

Body & Frame

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Contact us

Products

Our company

shop by category

Body & Frame  

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Body & Frame