Body & Frame (2)

DRAG SPECIALTIES Bezel Dipstick — Black

Restores a clean finish around the dipstick opening; includes replacement push nut for installation.

€8.77

DRAG SPECIALTIES Bezel Dipstick — 81028, Chrome

Bezel-style dipstick with included replacement push nut for easy installation and reliable oil checks.

€9.39

$Colored Hose Clamps for Oil Lines — 3/8\" oil lines, 6-pack, Chrome$

NAMZ Colored Hose Clamps for Oil Lines — 3/8\" oil lines, 6-pack,...

Custom-colored hose clamps for oil lines that fit braided copper, stainless-steel and most braided rubber hoses. Ideal for custom builds; made in the USA.

€32.42

DRAG SPECIALTIES Oil Tank — 3.0 qt, Chrome

Replacement oil tank with filler cap and about 3.0 quart capacity.

€124.18

DRAG SPECIALTIES Rear Fender — Unfinished

Raw steel finish; predrilled for OEM fender struts and license plate mount.

€108.08

DRAG SPECIALTIES Oil Line Retainer Assembly — 3/8" retainer, black

Secures oil lines from the oil tank to the engine. Replacement recommended when lines are removed. O-rings included.

€8.24

DRAG SPECIALTIES Oil Line Retainer Assembly — 1/2" retainer, black

Secures oil lines from the oil tank to the engine. Replacement recommended when lines are removed. O-rings included.

€8.24

S&S CYCLE Oil Line Kit — fits '07–'16 Touring, Black, Silver, Gold

Complete oil line kit for S&S crankcase installs on '07–'16 Touring models. Includes formed adapter, oil lines, fittings and clamps. Made in the USA.

€157.81

DRAG SPECIALTIES 6" Front Fender — 6" width, front mount, unfinished

Raw stamped-steel front fender; measures approximately 6" W (inside). Mounts with OE hardware. Sold each.

€76.33

DRAG SPECIALTIES Oil Tank Bracket Set — Chrome

Replaces front and rear oil tank brackets on late-model Softail motorcycles for improved fit and appearance.

€23.29

$Oil Plug Temperature Gauge — 70 mm (2-3/4\"), chrome$

DRAG SPECIALTIES Oil Plug Temperature Gauge — 70 mm (2-3/4\"), chrome

Monitors oil temperature up to 350°F. Installs in the oil plug for direct readings and quick response.

€19.79

DRAG SPECIALTIES Heavy-Duty Front Fender — Unfinished, front

Heavy-duty construction, raw finish, pre-drilled for OEM hardware, smooth style without trim holes.

€118.08

DRAG SPECIALTIES Lower Fitting Seals — 10 Pack, Black

Seals for lower fittings used on oil feed and return lines; replace worn seals to prevent leaks.

€13.94

DRAG SPECIALTIES Vibration Mount — 5 Pack, Black

Reduces vibration to protect electrical enclosures, fluid reservoirs and custom parts. Meets or exceeds OEM specifications.

€9.03

DRAG SPECIALTIES Heavy-Duty Front Fender — Front, Unfinished steel

Rugged, pre-drilled front fender with a smooth profile—no holes for trim, fender tip, or skirt. Raw finish and straightforward OEM installation.

€102.76

DRAG SPECIALTIES Lower Fitting Seals — 10 pack, brown

Seals for lower fittings on oil feed and return lines; replace when worn to prevent leaks.

€17.29

DRAG SPECIALTIES 6" Front Fender — front mount, 7-1/2" inside mounting width

Raw stamped steel front fender; measures approx. 6" W (inside). Mounts with OE hardware. Requires lower fender skirt if trim holes are present.

€76.33

KURYAKYN Easy-turn Dipstick Cover — Chrome

Uses factory dipstick internals; ergonomic cap makes turning and checking oil levels easy.

€27.35

6" Front Fender — 6" inside width, front mount, with trim holes, unfinished

DRAG SPECIALTIES 6" Front Fender — 6" inside width, front mount, with trim...

Raw stamped steel front fender; mounts with OE hardware. Fenders with trim holes require lower fender skirt.

€76.33

S&S CYCLE Oil Pump Compression Return Fitting — 50-8120, Chrome

Precision compression return fitting for oil pump installations. Made in the USA. Easy to install.

€24.24

DRAG SPECIALTIES OEM Rear Fender — 7-1/4" (18.5 cm), Unfinished

Direct OEM replacement rear fender; pre-drilled, accepts OE components and taillight assembly, and fits original fender struts and mounting hardware.

€40.86

S&S CYCLE Supply/Return Line Elbow — 90° return line, Black

Precision elbow fitting for fluid routing. Made in the USA. Easy to install.

€23.25

DRAG SPECIALTIES Custom Rear Fender — 77 cm L x 18 cm W, Unfinished

Raw steel rear fender; not pre-drilled and no taillight or license plate mount. Measures approx 30" L x 7-1/8" W. Each.

€53.94

DRAG SPECIALTIES Rear Fender — Unfinished, raw steel

Predrilled for OEM fender struts and license plate mount. Raw steel finish ready for customization.

€69.65

S&S CYCLE Fitting 1/8-27 — 1/8" NPT female, silver

Easy-to-assemble, high-quality fitting for reliable connections.

€6.31

S&S CYCLE Fitting 1/8-27 — 1/8" NPT male, brass

Easy-to-assemble high-quality fitting for reliable hose connections.

€11.29

DRAG SPECIALTIES Rear Fender — Raw finish, rear mount

Raw steel finish; predrilled for OEM fender struts and license plate mount. Sold each.

€72.67

ARLEN NESS Wrapper Front Fender — 26" Black

Race-inspired, lightweight composite fender with direct bolt-on fitment. Made in the U.S.A.

€134.31

JAGG OIL COOLERS Hose Clamp — 3/8" (9.5 mm), 10-pack, Black

Worm-drive clamp for secure, adjustable connections in custom oil cooler installations.

€11.00

Benchmark Front Fender for Dresser — 6.5" fender, 21" wheel fit, non-raked frame, black

KLOCK WERKS Benchmark Front Fender for Dresser — 6.5" fender, 21" wheel...

Durable front fender stamped from heavy U.S. steel with chrome mounting blocks; suitable for Dresser-style applications and custom builds. Made in the U.S.A.

€312.15

shop by category

Body & Frame

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Contact us

Products

Our company

shop by category

Body & Frame  

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Body & Frame