Body & Frame (2)

Universal Stainless Steel Braided Oil Line — 11/32" ID, 24" L, 1/8" NPT, Chrome

-€10.63
Out of Stock

DRAG SPECIALTIES Universal Stainless Steel Braided Oil Line — 11/32" ID, 24" L,...

Braided stainless steel oil line for universal fit. Includes chrome compression fittings for easy installation. Measured overall, including fittings. Made in the USA.

€30.08 €40.71

Tire Hugger Front Fender for Dresser — Fits 16–19" wheels, 6-1/4" width, Black E-coating

-€75.46
Out of Stock

KLOCK WERKS Tire Hugger Front Fender for Dresser — Fits 16–19" wheels,...

Stamped 14‑gauge steel front fender with 13‑step e-coated finish; laser cut, pre-drilled, includes mounting hardware. Made in the USA.

€293.45 €368.91

Tire Hugger Front Fender for Dresser — Black E-coating, 21" wheel, 5-11/16" inside mount

-€75.46
Out of Stock

KLOCK WERKS Tire Hugger Front Fender for Dresser — Black E-coating, 21"...

Stamped 14‑gauge steel front fender with 13‑step e-coating; laser cut and pre-drilled, includes mounting blocks and hardware.

€293.45 €368.91

Replacement Oil Line Seals — 6-pack, Black

-€1.47
Out of Stock

DRAG SPECIALTIES Replacement Oil Line Seals — 6-pack, Black

Replacement seals for stainless steel braided oil lines. Made in the USA.

€4.15 €5.62

Rear Fender — 99 cm (39") contour, 17.8 cm (7") inside mount, E-coating

-€123.26
Out of Stock

KLOCK WERKS Rear Fender — 99 cm (39") contour, 17.8 cm (7") inside mount,...

Pre-drilled rear fender with E-coating finish to resist rust; stamped in 14-gauge steel and made in the USA.

€479.33 €602.59

-€113.20
Out of Stock

KLOCK WERKS Rear Fender — E-coating

Pre-drilled rear fender stamped in 14-gauge US steel with E-coating to resist rust. Made in the USA.

€440.19 €553.39

-€19.12
Out of Stock

DRAG SPECIALTIES Fuel/Oil Line — 9.5 mm (3/8"), 244 cm (8'), Black

Reinforced smooth-bore fuel and oil line that resists fuel and oil. Made in the USA.

€54.05 €73.17

$Hugger Series Front Fender — Fits 16\", 17\", 18\", 19\" wheels, Black$

-€75.46
Out of Stock

KLOCK WERKS Hugger Series Front Fender — Fits 16\", 17\", 18\", 19\"...

Pre-drilled, stamped construction for a consistent finish and minimal bodywork.

Thick profile adds front-end rigidity and can be trimmed or shaped for a custom look.

Resists rust and corrosion; sold each. Installation requires separate tire hugger mounting blocks (sold separately).

€293.45 €368.91

-€5.94
Out of Stock

DRAG SPECIALTIES Fuel/Oil Line — 12.7 mm (1/2"), 61 cm (24")

Reinforced, smooth-bore fuel- and oil-resistant line for reliable service.

€16.81 €22.75

Hugger Series Front Fender — 5-7/8" width, fits 21" wheel, Black

-€75.46
Out of Stock

KLOCK WERKS Hugger Series Front Fender — 5-7/8" width, fits 21" wheel, Black

Stamped, pre-drilled front hugger fender that adds rigidity and accepts custom shaping. E-coated for corrosion resistance. Made in USA. Requires Klock Werks Tire Hugger mounting blocks (sold separately).

€293.45 €368.91

Hugger Series Front Fender — 21" wheel, front, black, e-coated

-€75.46
Out of Stock

KLOCK WERKS Hugger Series Front Fender — 21" wheel, front, black, e-coated

Steel, pre-drilled front fender with e-coating for corrosion resistance. Made in the USA. Requires Klock Werks Tire Hugger mounting blocks (sold separately).

€293.45 €368.91

Hugger Series Front Fender — 4-1/2" wide, 21" wheel, inside mount 4-1/4", E-Coating, Black

-€75.46
Out of Stock

KLOCK WERKS Hugger Series Front Fender — 4-1/2" wide, 21" wheel, inside...

Thick, pre-drilled stamped front fender with a corrosion-resistant electrocoat. Made in the USA. Requires Tire Hugger mounting blocks (sold separately).

€293.45 €368.91

-€15.24
Out of Stock

DRAG SPECIALTIES Oil Filter Line Kit — Chrome

OEM-style oil feed and return lines kit with compression fitting, seals, ferrules and compression nuts for straightforward installation.

€43.06 €58.30

-€27.90
Out of Stock

DRAG SPECIALTIES 6" Front Fender — 6" W, 7-1/4" inside mount, Unfinished

Raw stamped steel front fender; mounts with OE hardware. Trim-hole models require a lower fender skirt.

€78.85 €106.75

-€17.44
Out of Stock

DRAG SPECIALTIES Oil Filter Line Kit — Chrome

Complete oil filter line kit with OEM-style feed and return lines, compression fittings, seals, and nuts for easy installation.

€49.31 €66.75

Oil Hose Upgrade Kit — 91 cm (3'), Black

-€15.41
Out of Stock

JAGG OIL COOLERS Oil Hose Upgrade Kit — 91 cm (3'), Black

Performance oil hose upgrade kit with easy installation; includes hose separators and four hose finishers with worm-drive clamps. Made in USA.

€59.94 €75.35

Oil Hose Upgrade Kit — 91 cm (3'), stainless steel

-€15.41
Out of Stock

JAGG OIL COOLERS Oil Hose Upgrade Kit — 91 cm (3'), stainless steel

Braided performance oil hoses and easy-install finishers for a racy, track-ready upgrade. Includes hose separators and clamp-integrated finishers. Made in the USA.

€59.94 €75.35

OEM Rear Fender — 18.5 cm (7-1/4") width, unfinished

-€31.07
Out of Stock

DRAG SPECIALTIES OEM Rear Fender — 18.5 cm (7-1/4") width, unfinished

Direct OEM replacement rear fender; raw stamped-steel, pre-drilled to accept OE components and taillight assembly.

€87.80 €118.87

-€25.69
Out of Stock

DRAG SPECIALTIES FXR Rear Fender — Unfinished, steel

Raw steel rear fender, pre-drilled for OEM fender struts, license plate mounts and taillight.

€72.60 €98.29

-€6.94
Out of Stock

S&S CYCLE Oil Filter Fitting — Steel, Straight fitting

Compact connector for oil filter installation; provides reliable sealing and easy maintenance.

€19.66 €26.60

Oil Hose Upgrade Kit — 15 cm (6 in), Black

-€19.82
Out of Stock

JAGG OIL COOLERS Oil Hose Upgrade Kit — 15 cm (6 in), Black

Braided, track-ready oil hoses that deliver a racy look and simple installation; kit includes two hose separators and four hose finishers with clamps.

€77.03 €96.85

Oil Hose Upgrade Kit — 15 cm (6") stainless steel

-€19.82
Out of Stock

JAGG OIL COOLERS Oil Hose Upgrade Kit — 15 cm (6") stainless steel

Enhances appearance and oil routing with an easy-install kit; includes hose separators and finishers with worm-drive clamps.

€77.03 €96.85

-€30.18
Out of Stock

DRAG SPECIALTIES Rear Fender — Unfinished steel

Predrilled rear fender for OEM fender struts and license plate mount; ships ready for custom finishing.

€85.30 €115.48

-€30.18
Out of Stock

DRAG SPECIALTIES Rear Fender — Unfinished steel

Pre-drilled for OEM fender struts and license plate mount. Ready for custom finishing.

€85.30 €115.48

-€7.36
Out of Stock

DRAG SPECIALTIES Chrome Oil Line — Chrome

OEM-style oil feed line that accepts all OEM connectors and retainers.

€20.81 €28.17

-€18.74
Out of Stock

DRAG SPECIALTIES Chrome Oil Line — Oil return line

OEM-style replacement; accepts all OEM connectors and retainers.

€52.98 €71.72

-€19.30
Out of Stock

DRAG SPECIALTIES Chrome Oil Line — Chrome

OEM-style replacement component that accepts all OEM connectors and retainers for a secure fit.

€54.55 €73.85

WFB™ Benchmark Front Fender — 6-1/2" width, 26" wheel, Black, E-Coating

-€83.00
Out of Stock

KLOCK WERKS WFB™ Benchmark Front Fender — 6-1/2" width, 26" wheel, Black,...

Rivetless, pre-drilled front fender with an extended 1.5" rear tail; pairs with WFB™ rear fender. Made in USA.

€322.80 €405.80

-€15.64
Out of Stock

DRAG SPECIALTIES Chrome Oil Line — T03-0163

OEM-style replacement that accepts all OEM connectors and retainers for a direct fit.

€44.19 €59.83

-€1.03
Out of Stock

DRAG SPECIALTIES Oil Drain Elbow — Black, Rubber

Directs used oil cleanly into a drain pan to minimize spills during oil changes.

€2.91 €3.94

shop by category

Body & Frame

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Contact us

Products

Our company

shop by category

Body & Frame  

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Body & Frame