Body & Frame (2)

-€3.51

RUSSELL Universal Hose End — -8 AN female, 90° elbow, Anodized Black

Compact, lightweight hose end engineered for universal hose assemblies. Precision-machined interface provides a secure, leak-resistant connection. Ideal for tight spaces.

€13.63 €17.14

-€49.37

DRAG SPECIALTIES OEM Rear Fender — 24 cm (9-1/2"), unfinished

Direct replacement OEM rear fender, pre-drilled for OE components and taillight; accepts OEM struts and mounting hardware.

€139.55 €188.92

-€1.99

EMGO Replacement Gas Cap — Vented, Chrome

OE-style flat vented gas cap for direct replacement. Helps prevent leaks and reduces tank vacuum. Easy, tool-friendly installation.

€5.63 €7.62

$Colored Hose Clamps for Oil Lines — 3/8\" oil lines, 6-pack, Chrome$

-€11.16

NAMZ Colored Hose Clamps for Oil Lines — 3/8\" oil lines, 6-pack,...

Custom-colored hose clamps for oil lines that fit braided copper, stainless-steel and most braided rubber hoses. Ideal for custom builds; made in the USA.

€33.49 €44.65

-€3.04

EMGO Replacement Gas Cap Gaskets — 63.5 mm (2.5 in), 10 pack, cork

Durable replacement gaskets to restore a secure seal on gas caps. Easy to install.

€8.60 €11.64

-€39.50

DRAG SPECIALTIES Rear Fender — Unfinished

Raw steel finish; predrilled for OEM fender struts and license plate mount.

€111.65 €151.15

-€3.01

DRAG SPECIALTIES Oil Line Retainer Assembly — 3/8" retainer, black

Secures oil lines from the oil tank to the engine. Replacement recommended when lines are removed. O-rings included.

€8.51 €11.52

-€7.96

DRAG SPECIALTIES Push-Button Fuel Door Latch Kit — Chrome

Push-button latch kit replaces the key latch and includes the door spring hinge plate for secure, easy installation.

€22.50 €30.46

-€3.01

DRAG SPECIALTIES Oil Line Retainer Assembly — 1/2" retainer, black

Secures oil lines from the oil tank to the engine. Replacement recommended when lines are removed. O-rings included.

€8.51 €11.52

-€7.96

DRAG SPECIALTIES Push-Button Fuel Door Latch Kit — Black, P/N 77388BS2

Replaces a keyed fuel door latch with a push-button mechanism and includes a door spring hinge plate for secure operation.

€22.50 €30.46

-€41.92

S&S CYCLE Oil Line Kit — fits '07–'16 Touring, Black, Silver, Gold

Complete oil line kit for S&S crankcase installs on '07–'16 Touring models. Includes formed adapter, oil lines, fittings and clamps. Made in the USA.

€163.02 €204.94

-€27.90

DRAG SPECIALTIES 6" Front Fender — 6" width, front mount, unfinished

Raw stamped-steel front fender; measures approximately 6" W (inside). Mounts with OE hardware. Sold each.

€78.85 €106.75

Heavy-Duty Front Fender — Unfinished, front

-€43.16

DRAG SPECIALTIES Heavy-Duty Front Fender — Unfinished, front

Heavy-duty construction, raw finish, pre-drilled for OEM hardware, smooth style without trim holes.

€121.99 €165.15

-€5.09

DRAG SPECIALTIES Lower Fitting Seals — 10 Pack, Black

Seals for lower fittings used on oil feed and return lines; replace worn seals to prevent leaks.

€14.40 €19.49

-€12.52

DRAG SPECIALTIES Screw-In Locking Skull Gas Cap — Chrome

Hidden key slot under the skull keeps dirt out of the lock; two keys included.

€35.40 €47.92

Heavy-Duty Front Fender — Front, Unfinished steel

-€37.56

DRAG SPECIALTIES Heavy-Duty Front Fender — Front, Unfinished steel

Rugged, pre-drilled front fender with a smooth profile—no holes for trim, fender tip, or skirt. Raw finish and straightforward OEM installation.

€106.16 €143.72

-€6.32

DRAG SPECIALTIES Lower Fitting Seals — 10 pack, brown

Seals for lower fittings on oil feed and return lines; replace when worn to prevent leaks.

€17.86 €24.18

-€27.90

DRAG SPECIALTIES 6" Front Fender — front mount, 7-1/2" inside mounting width

Raw stamped steel front fender; measures approx. 6" W (inside). Mounts with OE hardware. Requires lower fender skirt if trim holes are present.

€78.85 €106.75

Screw-In Locking Skull Gas Cap — Black, vented

-€12.14

DRAG SPECIALTIES Screw-In Locking Skull Gas Cap — Black, vented

Screw-In Locking Skull Gas Cap with hidden key slot and two keys included. Screw-in installation for easy replacement.

€34.28 €46.42

6" Front Fender — 6" inside width, front mount, with trim holes, unfinished

-€27.90

DRAG SPECIALTIES 6" Front Fender — 6" inside width, front mount, with trim...

Raw stamped steel front fender; mounts with OE hardware. Fenders with trim holes require lower fender skirt.

€78.85 €106.75

-€8.88

S&S CYCLE Oil Pump Compression Return Fitting — 50-8120, Chrome

Precision compression return fitting for oil pump installations. Made in the USA. Easy to install.

€25.05 €33.93

-€14.93

DRAG SPECIALTIES OEM Rear Fender — 7-1/4" (18.5 cm), Unfinished

Direct OEM replacement rear fender; pre-drilled, accepts OE components and taillight assembly, and fits original fender struts and mounting hardware.

€42.22 €57.15

-€19.12

S&S CYCLE Supply/Return Line Elbow — 90° return line, Black

Precision elbow fitting for fluid routing. Made in the USA. Easy to install.

€24.02 €43.14

Vented Gas Cap with Weld-On Bung — 1-5/8" diameter, Aluminum

-€27.76

LA CHOPPERS Vented Gas Cap with Weld-On Bung — 1-5/8" diameter, Aluminum

Easy weld-in vented gas cap with knurled aluminum cap, right-hand thread, and included weld-on bung.

€41.07 €68.83

-€19.72

DRAG SPECIALTIES Custom Rear Fender — 77 cm L x 18 cm W, Unfinished

Raw steel rear fender; not pre-drilled and no taillight or license plate mount. Measures approx 30" L x 7-1/8" W. Each.

€55.73 €75.45

-€25.47

DRAG SPECIALTIES Rear Fender — Unfinished, raw steel

Predrilled for OEM fender struts and license plate mount. Raw steel finish ready for customization.

€71.95 €97.42

-€1.65

S&S CYCLE Fitting 1/8-27 — 1/8" NPT female, silver

Easy-to-assemble, high-quality fitting for reliable connections.

€6.52 €8.17

-€12.45

DRAG SPECIALTIES Split Skull Gas Cap — Chrome, vented

Distinctive Split Skull styling for the fuel area; easy installation and secure closure.

€35.18 €47.63

-€3.00

S&S CYCLE Fitting 1/8-27 — 1/8" NPT male, brass

Easy-to-assemble high-quality fitting for reliable hose connections.

€11.66 €14.66

-€26.56

DRAG SPECIALTIES Rear Fender — Raw finish, rear mount

Raw steel finish; predrilled for OEM fender struts and license plate mount. Sold each.

€75.07 €101.63

shop by category

Body & Frame

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Contact us

Products

Our company

shop by category

Body & Frame  

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Body & Frame