Body & Frame (2)

-€16.73
Out of Stock

DRAG SPECIALTIES [object Object]

High-strength steel kickstand; direct OEM replacement. Under-stock length for lowered suspension. Measured from first bend to first bend for Big Twin, Softail, FLT and XL.

€47.26 €63.99

-€12.20
Out of Stock

DRAG SPECIALTIES Pop-Up Gas Cap — 59.9 mm (2.36"), Black

Low-profile pop-up fuel cap; nearly flush fit, opens with a quarter-turn of the center; use OEM-style gasket for a positive seal.

€34.48 €46.68

-€64.26
Out of Stock

PINGEL [object Object]

Durable TIG-welded steel kickstand that mounts to the stock bracket and uses the stock return spring. Large foot pad and extended kick tab for stable support; compatible with stock and oversized primary covers. Made in the U.S.A.

€249.89 €314.15

Rear Fender — 99 cm (39") contour, 17.8 cm (7") inside mount, E-coating

-€123.26
Out of Stock

KLOCK WERKS Rear Fender — 99 cm (39") contour, 17.8 cm (7") inside mount,...

Pre-drilled rear fender with E-coating finish to resist rust; stamped in 14-gauge steel and made in the USA.

€479.33 €602.59

$Fuel Level Gas Cap — 69.9 mm (2-3/4\"), Chrome$

-€45.25
Out of Stock

DRAG SPECIALTIES Fuel Level Gas Cap — 69.9 mm (2-3/4\"), Chrome

User-programmable LED fuel-level indicator with built-in low-fuel warning; push-in installation and wiring harness included. Fits left-side analog gauges.

€127.92 €173.17

-€9.42
Out of Stock

DRAG SPECIALTIES [object Object]

Makes hard-to-reach kickstands easier to operate. Includes mounting hardware. Drilling required.

€26.61 €36.03

-€113.20
Out of Stock

KLOCK WERKS Rear Fender — E-coating

Pre-drilled rear fender stamped in 14-gauge US steel with E-coating to resist rust. Made in the USA.

€440.19 €553.39

-€16.73
Out of Stock

DRAG SPECIALTIES Skull Gas Cap — Black, Chrome, Screw-On, Pair

Bold skull-style gas cap for OEM replacement or custom builds. Cast aluminum construction.

€47.32 €64.05

-€8.47
Out of Stock

DRAG SPECIALTIES Skull Gas Cap — Black/Chrome, Screw-On

Skull-style gas cap for OEM replacement and custom builds. Cast aluminum construction. Sold individually.

€23.92 €32.39

Original-Style Gas Cap — Vented, Black, Big Twin, XL

-€2.60
Out of Stock

DRAG SPECIALTIES Original-Style Gas Cap — Vented, Black, Big Twin, XL

Replacement gas cap for OEM and custom tanks. Will not fit screw-in type tanks. Verify fitment before purchase.

€7.35 €9.95

Original-Style Gas Cap — Big Twin, XL, Non-vented, Black gloss

-€2.12
Out of Stock

DRAG SPECIALTIES Original-Style Gas Cap — Big Twin, XL, Non-vented, Black gloss

Replacement gas cap for OEM and custom tanks. Will not fit screw-in type tanks.

€5.99 €8.11

$Hugger Series Front Fender — Fits 16\", 17\", 18\", 19\" wheels, Black$

-€75.46
Out of Stock

KLOCK WERKS Hugger Series Front Fender — Fits 16\", 17\", 18\", 19\"...

Pre-drilled, stamped construction for a consistent finish and minimal bodywork.

Thick profile adds front-end rigidity and can be trimmed or shaped for a custom look.

Resists rust and corrosion; sold each. Installation requires separate tire hugger mounting blocks (sold separately).

€293.45 €368.91

Original-Style Gas Cap — Big Twin, XL, Black

-€2.60
Out of Stock

DRAG SPECIALTIES Original-Style Gas Cap — Big Twin, XL, Black

Replacement gas cap for OEM and custom tanks. Not compatible with screw-in type tanks.

€7.35 €9.95

Original-Style Gas Cap — Non-Vented, Big Twin & XL, Matte black

-€2.12
Out of Stock

DRAG SPECIALTIES Original-Style Gas Cap — Non-Vented, Big Twin & XL, Matte black

Replacement gas cap for OEM and custom tanks. Will not fit screw-in type tanks.

€5.99 €8.11

-€14.02
Out of Stock

DRAG SPECIALTIES [object Object]

High-strength steel kickstand; direct OEM replacement. Under-stock length suited for lowered suspension. Measure Big Twin, Softail, FLT and XL from first bend to first bend.

€39.64 €53.66

Hugger Series Front Fender — 5-7/8" width, fits 21" wheel, Black

-€75.46
Out of Stock

KLOCK WERKS Hugger Series Front Fender — 5-7/8" width, fits 21" wheel, Black

Stamped, pre-drilled front hugger fender that adds rigidity and accepts custom shaping. E-coated for corrosion resistance. Made in USA. Requires Klock Werks Tire Hugger mounting blocks (sold separately).

€293.45 €368.91

Hugger Series Front Fender — 21" wheel, front, black, e-coated

-€75.46
Out of Stock

KLOCK WERKS Hugger Series Front Fender — 21" wheel, front, black, e-coated

Steel, pre-drilled front fender with e-coating for corrosion resistance. Made in the USA. Requires Klock Werks Tire Hugger mounting blocks (sold separately).

€293.45 €368.91

Hugger Series Front Fender — 4-1/2" wide, 21" wheel, inside mount 4-1/4", E-Coating, Black

-€75.46
Out of Stock

KLOCK WERKS Hugger Series Front Fender — 4-1/2" wide, 21" wheel, inside...

Thick, pre-drilled stamped front fender with a corrosion-resistant electrocoat. Made in the USA. Requires Tire Hugger mounting blocks (sold separately).