Body & Frame (2)

Hugger Series Front Fender — 21" wheel, 5-15/16" outside mounting width

-€75.46
Out of Stock

KLOCK WERKS Hugger Series Front Fender — 21" wheel, 5-15/16" outside...

Steel front fender adds rigidity, comes stamped and pre-drilled for a consistent finish, resists corrosion; mounting blocks sold separately.

€293.45 €368.91

-€70.64
Out of Stock

DRAG SPECIALTIES Oil Tank — Side-fill, 3 qt, Black

OEM-style side-fill design for a clean, factory look. Durable construction and straightforward installation.

€199.60 €270.24

Hugger Series Front Fender — 21", 45" contour, 5-7/8" width, E-Coating

-€75.46
Out of Stock

KLOCK WERKS Hugger Series Front Fender — 21", 45" contour, 5-7/8" width,...

Adds front-end rigidity and Kustom styling. Stamped, pre-drilled for consistent fit and minimal body work. Protective coating resists corrosion. Made in the USA. Requires Klock Werks Tire Hugger mounting blocks (sold separately).

€293.45 €368.91

-€8.07
Out of Stock

PRO-ONE PERF.MFG. Oil Tank Mount Stud Covers — Chrome

Fits the rubber mounts on Softail oil tanks. High-shine plated finish.

€22.83 €30.90

Legacy Lynx Gas Tank — 11.4 L (3 US gal.), weld-in, raw

-€75.87
Out of Stock

DRAG SPECIALTIES Legacy Lynx Gas Tank — 11.4 L (3 US gal.), weld-in, raw

Custom-styled, precision-made gas tank with raised bung and raw aluminum cap; ships unpainted, mount kit included.

€214.41 €290.28

-€9.31
Out of Stock

KURYAKYN Precision® Oil Dipstick — Black

Durable die‑cast construction with premium plating; easy‑grip handle for hassle‑free opening and tightening; coordinates with Precision engine covers for the Milwaukee-Eight™.

€36.19 €45.50

-€73.73
Out of Stock

DRAG SPECIALTIES Legacy Gas Tank — 11.4 L (3 US gal), 22 mm outlet, raw finish

Precision-built Legacy Gas Tank with TIG-welded steel construction and unique custom styling. Ships unpainted; caps sold separately.

€208.35 €282.08

Tire Hugger Front Fender for Dresser — Fits 16–19" wheels, 6-1/4" width, Black E-coating

-€75.46
Out of Stock

KLOCK WERKS Tire Hugger Front Fender for Dresser — Fits 16–19" wheels,...

Stamped 14‑gauge steel front fender with 13‑step e-coated finish; laser cut, pre-drilled, includes mounting hardware. Made in the USA.

€293.45 €368.91

Tire Hugger Front Fender for Dresser — Black E-coating, 21" wheel, 5-11/16" inside mount

-€75.46
Out of Stock

KLOCK WERKS Tire Hugger Front Fender for Dresser — Black E-coating, 21"...

Stamped 14‑gauge steel front fender with 13‑step e-coating; laser cut and pre-drilled, includes mounting blocks and hardware.

€293.45 €368.91

-€9.31
Out of Stock

KURYAKYN Precision® Oil Dipstick — Black

Durable die-cast construction with premium plating. Easy-to-grip cap for quick opening and tightening. Matches engine covers for the Milwaukee-Eight™.

€36.19 €45.50

Engine Oil Spout Kit — 6061-T6 aluminum, Chrome

-€22.63
Out of Stock

DRAG SPECIALTIES Engine Oil Spout Kit — 6061-T6 aluminum, Chrome

CNC-machined filler with thread-in one-piece dipstick; fits most starters and aftermarket bearing doors. Instructions included.

€63.97 €86.60

-€12.20
Out of Stock

DRAG SPECIALTIES Pop-Up Gas Cap — 59.9 mm (2.36"), Black

Low-profile pop-up fuel cap; nearly flush fit, opens with a quarter-turn of the center; use OEM-style gasket for a positive seal.

€34.48 €46.68

Engine Oil Spout Kit — 323056, Black, Chrome

-€22.63
Out of Stock

DRAG SPECIALTIES Engine Oil Spout Kit — 323056, Black, Chrome

Must-have for aftermarket hydraulic side covers, doors and actuators. Precision CNC-machined with a thread-in one-piece dipstick. Custom spout design and installation instructions included.

€63.97 €86.60

Rear Fender — 99 cm (39") contour, 17.8 cm (7") inside mount, E-coating

-€123.26
Out of Stock

KLOCK WERKS Rear Fender — 99 cm (39") contour, 17.8 cm (7") inside mount,...

Pre-drilled rear fender with E-coating finish to resist rust; stamped in 14-gauge steel and made in the USA.

€479.33 €602.59

Engine Oil Spout Kit — 6061-T6 aluminum, black or chrome finish

-€40.85
Out of Stock

DRAG SPECIALTIES Engine Oil Spout Kit — 6061-T6 aluminum, black or chrome finish

Essential oil spout kit for aftermarket hydraulic side covers, doors and actuators. CNC-machined billet spout with thread-in one-piece dipstick to prevent blowout. Custom design fits most starters and bearing doors. Instructions included.

€115.47 €156.32

$Fuel Level Gas Cap — 69.9 mm (2-3/4\"), Chrome$

-€45.25
Out of Stock

DRAG SPECIALTIES Fuel Level Gas Cap — 69.9 mm (2-3/4\"), Chrome

User-programmable LED fuel-level indicator with built-in low-fuel warning; push-in installation and wiring harness included. Fits left-side analog gauges.

€127.92 €173.17

Engine Oil Spout Kit — 6061-T6 aluminum, Black, Silver

-€18.95
Out of Stock

DRAG SPECIALTIES Engine Oil Spout Kit — 6061-T6 aluminum, Black, Silver

Secure, easy oil fill for aftermarket side covers and bearing doors. CNC-machined billet with a thread-in one-piece dipstick. Instructions included.

€53.57 €72.52

-€113.20
Out of Stock

KLOCK WERKS Rear Fender — E-coating

Pre-drilled rear fender stamped in 14-gauge US steel with E-coating to resist rust. Made in the USA.

€440.19 €553.39

-€22.63
Out of Stock

DRAG SPECIALTIES Engine Oil Spout Kit — Black, Silver

Essential oil spout kit for aftermarket hydraulic side covers, doors and actuators. Includes a thread-in one-piece dipstick and installation instructions.

€63.97 €86.60

-€16.73
Out of Stock

DRAG SPECIALTIES Skull Gas Cap — Black, Chrome, Screw-On, Pair

Bold skull-style gas cap for OEM replacement or custom builds. Cast aluminum construction.

€47.32 €64.05

-€33.31
Out of Stock

DRAG SPECIALTIES Engine Oil Spout Kit — 6061-T6 aluminum, Black, Silver

Must-have for aftermarket hydraulic side covers, doors and actuators. CNC-machined billet design with a threaded one-piece dipstick; instructions included.