Body & Frame (2)

Legacy Gas Tank — 11.4 L (3 US gal), 22 mm outlet, Raw

-€92.47

DRAG SPECIALTIES Legacy Gas Tank — 11.4 L (3 US gal), 22 mm outlet, Raw

TIG-welded, deep-drawn steel gas tank with custom styling. Includes screw-in bung and mounting hardware. Ships unpainted; caps sold separately.

€261.33 €353.80

-€28.25

PRO-ONE PERF.MFG. Fuel Door — Black

Adds a machined accent to the dash with a precise, refined finish.

€79.83 €108.08

Original-Style Gas Cap — Black, Vented, Shovelhead, XL

-€2.78

DRAG SPECIALTIES Original-Style Gas Cap — Black, Vented, Shovelhead, XL

Replacement gas cap for OEM and custom tanks. Will not fit screw-in type tanks.

€7.84 €10.62

Original-Style Gas Cap — Shovelhead, Non-vented, Black

-€2.55

DRAG SPECIALTIES Original-Style Gas Cap — Shovelhead, Non-vented, Black

Replacement gas cap for OEM and custom tanks. Will not fit screw-in type tanks.

€7.22 €9.77

Legacy Gas Tank — 11.4 L (3 US gal.), fuel pump outlet, raw

-€84.14

DRAG SPECIALTIES Legacy Gas Tank — 11.4 L (3 US gal.), fuel pump outlet, raw

Precision TIG-welded, deep-drawn gas tank with custom styling. Ships unpainted; caps not included.

€237.81 €321.95

Pop-Up Gas Cap — 59.90 mm (2.36"), Chrome

-€12.20

DRAG SPECIALTIES Pop-Up Gas Cap — 59.90 mm (2.36"), Chrome

Flush-fit pop-up gas cap with billet aluminum construction. Quarter-turn center operation and recommended OEM-style gasket for a positive seal.

€34.48 €46.68

Custom Gas Tank — Tunnel 3", 11.4 L (3 US gal.)

-€62.74

DRAG SPECIALTIES Custom Gas Tank — Tunnel 3", 11.4 L (3 US gal.)

Steel TIG-welded custom gas tank with chrome mounting hardware; requires sealing before use. Vent cap sold separately.

€177.32 €240.06

-€14.08

LA CHOPPERS Vented Gas Cap with Weld-On Bung — 40 mm (1-5/8"), raw

Vented aluminum cap with knurled edge
Weld-on steel bung for secure mounting
Right-hand thread
Cap: 1-5/8" diameter × 1/4" tall; Bung: 1-1/2" × 1"
Made in the USA

€54.75 €68.83

Custom Gas Tank — 11.4 L (3 US gal), tunnel 3", 20" L, 11" W, raw

-€49.54

DRAG SPECIALTIES Custom Gas Tank — 11.4 L (3 US gal), tunnel 3", 20" L, 11" W, raw

TIG-welded custom gas tank with chrome mounting hardware; deep tunnel and approximate 23" tab spacing; vented cap sold separately; must be sealed before use.

€140.00 €189.54

Custom Gas Tank — 3 US gal (11.4 L), tunnel depth 3", outlet 22 mm

-€36.49

DRAG SPECIALTIES Custom Gas Tank — 3 US gal (11.4 L), tunnel depth 3", outlet...

Steel TIG-welded custom gas tank with chrome hardware, 3" tunnel. Mounting tabs ~23" C-C. Cap sold separately; tank requires sealing.

€103.14 €139.63

Skull Gas Cap — Vented, Screw-On, Black/Chrome

-€10.48

DRAG SPECIALTIES Skull Gas Cap — Vented, Screw-On, Black/Chrome

Distinctive skull-style gas cap for OEM replacement and custom applications. Cast aluminum construction.

€29.60 €40.08

Builders Series 4" Stretched Rear Fender — 7-1/8" width, Unfinished

-€123.26

KLOCK WERKS Builders Series 4" Stretched Rear Fender — 7-1/8" width,...

Matches standard fender dimensions but ships without mounting holes to reduce bodywork; stamped from heavy-gauge U.S.-made metal for durable, smooth results.

€479.33 €602.59

Skull Gas Cap — Black, Chrome, Screw On, Pair

-€22.90

DRAG SPECIALTIES Skull Gas Cap — Black, Chrome, Screw On, Pair

Bold skull styling for OEM replacement and custom projects; cast aluminum construction.

€64.72 €87.62

-€14.08

SADDLEMEN Fuel Tank Cover — Large, Black

Protects your fuel tank during storage and servicing with a soft inner and integrated storage pockets.

€39.84 €53.92

-€49.37

DRAG SPECIALTIES OEM Rear Fender — 24 cm (9-1/2"), unfinished

Direct replacement OEM rear fender, pre-drilled for OE components and taillight; accepts OEM struts and mounting hardware.

€139.55 €188.92

-€14.08

SADDLEMEN Fuel Tank Cover — Small, Black

Protective cover for motorcycle fuel tanks with a soft inner, built-in storage loops and tool pouches, plus a zippered hardware pouch.

€39.84 €53.92

-€1.99

EMGO Replacement Gas Cap — Vented, Chrome

OE-style flat vented gas cap for direct replacement. Helps prevent leaks and reduces tank vacuum. Easy, tool-friendly installation.

€5.63 €7.62

-€3.04

EMGO Replacement Gas Cap Gaskets — 63.5 mm (2.5 in), 10 pack, cork

Durable replacement gaskets to restore a secure seal on gas caps. Easy to install.

€8.60 €11.64

-€39.50

DRAG SPECIALTIES Rear Fender — Unfinished

Raw steel finish; predrilled for OEM fender struts and license plate mount.

€111.65 €151.15

-€7.96

DRAG SPECIALTIES Push-Button Fuel Door Latch Kit — Chrome

Push-button latch kit replaces the key latch and includes the door spring hinge plate for secure, easy installation.

€22.50 €30.46

-€7.96

DRAG SPECIALTIES Push-Button Fuel Door Latch Kit — Black, P/N 77388BS2

Replaces a keyed fuel door latch with a push-button mechanism and includes a door spring hinge plate for secure operation.

€22.50 €30.46

-€27.90

DRAG SPECIALTIES 6" Front Fender — 6" width, front mount, unfinished

Raw stamped-steel front fender; measures approximately 6" W (inside). Mounts with OE hardware. Sold each.

€78.85 €106.75

Heavy-Duty Front Fender — Unfinished, front

-€43.16

DRAG SPECIALTIES Heavy-Duty Front Fender — Unfinished, front

Heavy-duty construction, raw finish, pre-drilled for OEM hardware, smooth style without trim holes.

€121.99 €165.15

-€9.97

CULT WERK Tank Lifter — Black

Height-adjustable tank lifter (35–50 mm) that raises the front of the fuel tank to improve clearance and highlight the "Peanut" shape; allows wiring to be routed under the tank without altering cables.

€57.53 €67.50

-€12.52

DRAG SPECIALTIES Screw-In Locking Skull Gas Cap — Chrome

Hidden key slot under the skull keeps dirt out of the lock; two keys included.

€35.40 €47.92

Heavy-Duty Front Fender — Front, Unfinished steel

-€37.56

DRAG SPECIALTIES Heavy-Duty Front Fender — Front, Unfinished steel

Rugged, pre-drilled front fender with a smooth profile—no holes for trim, fender tip, or skirt. Raw finish and straightforward OEM installation.

€106.16 €143.72

-€8.00

CULT WERK Tank Lifter — height 35–50 mm, Black

Height-adjustable tank lift (35–50 mm) raises the front attachment for improved 'Peanut' shaping and allows the wiring harness to be routed without modifying cables.

€46.17 €54.17

-€27.90

DRAG SPECIALTIES 6" Front Fender — front mount, 7-1/2" inside mounting width

Raw stamped steel front fender; measures approx. 6" W (inside). Mounts with OE hardware. Requires lower fender skirt if trim holes are present.

€78.85 €106.75

Screw-In Locking Skull Gas Cap — Black, vented

-€12.14

DRAG SPECIALTIES Screw-In Locking Skull Gas Cap — Black, vented

Screw-In Locking Skull Gas Cap with hidden key slot and two keys included. Screw-in installation for easy replacement.

€34.28 €46.42

6" Front Fender — 6" inside width, front mount, with trim holes, unfinished

-€27.90

DRAG SPECIALTIES 6" Front Fender — 6" inside width, front mount, with trim...

Raw stamped steel front fender; mounts with OE hardware. Fenders with trim holes require lower fender skirt.

€78.85 €106.75

shop by category

Body & Frame

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Contact us

Products

Our company

shop by category

Body & Frame  

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Body & Frame