Body & Frame (2)

Hugger Series Front Fender — 21" wheel, 5-15/16" outside mounting width

-€75.46
Out of Stock

KLOCK WERKS Hugger Series Front Fender — 21" wheel, 5-15/16" outside...

Steel front fender adds rigidity, comes stamped and pre-drilled for a consistent finish, resists corrosion; mounting blocks sold separately.

€293.45 €368.91

Universal Stainless Steel Braided Oil Line — 1/8" NPT, 8.7 mm (11/32") ID, 40.5 cm (16"), chrome

-€9.45
Out of Stock

DRAG SPECIALTIES Universal Stainless Steel Braided Oil Line — 1/8" NPT, 8.7 mm...

Durable braided oil line with compression fittings; measured overall and made in the USA. Sold each.

€26.68 €36.13

Universal Stainless Steel Braided Oil Line — 17" length, 1/8" NPT fittings, 11/32" (8.7 mm), Chrome

-€9.60
Out of Stock

DRAG SPECIALTIES Universal Stainless Steel Braided Oil Line — 17" length, 1/8"...

Stainless steel braided oil line with 1/8" NPT chrome compression fittings. Measured overall; made in the USA.

€27.13 €36.73

$Universal Stainless Steel Braided Oil Line — 1/8\" NPT fittings, 8.7 mm ID, 18\" length, chrome$

-€9.74
Out of Stock

DRAG SPECIALTIES Universal Stainless Steel Braided Oil Line — 1/8\" NPT...

Universal oil line with included compression fittings for easy installation. Measured overall, including fittings. Made in the USA.

€27.55 €37.29

Hugger Series Front Fender — 21", 45" contour, 5-7/8" width, E-Coating

-€75.46
Out of Stock

KLOCK WERKS Hugger Series Front Fender — 21", 45" contour, 5-7/8" width,...

Adds front-end rigidity and Kustom styling. Stamped, pre-drilled for consistent fit and minimal body work. Protective coating resists corrosion. Made in the USA. Requires Klock Werks Tire Hugger mounting blocks (sold separately).

€293.45 €368.91

Universal Stainless Steel Braided Oil Line — 51 cm (20"), 8.7 mm (11/32"), 1/8" NPT, Chrome

-€10.04
Out of Stock

DRAG SPECIALTIES Universal Stainless Steel Braided Oil Line — 51 cm (20"), 8.7...

Universal braided oil line for reliable fluid transfer. Includes compression fittings. Measured overall, including fittings. Made in the USA.

€28.39 €38.43

Universal Stainless Steel Braided Oil Line — 22" length, 8.7 mm ID, 1/8" NPT fittings, chrome

-€10.32
Out of Stock

DRAG SPECIALTIES Universal Stainless Steel Braided Oil Line — 22" length, 8.7...

Universal braided oil line with compression fittings; measured overall and made in the USA.

€29.22 €39.54

Legacy Lynx Gas Tank — 11.4 L (3 US gal.), weld-in, raw

-€75.87
Out of Stock

DRAG SPECIALTIES Legacy Lynx Gas Tank — 11.4 L (3 US gal.), weld-in, raw

Custom-styled, precision-made gas tank with raised bung and raw aluminum cap; ships unpainted, mount kit included.

€214.41 €290.28

Universal Stainless Steel Braided Oil Line — 11/32" ID, 24" L, 1/8" NPT, Chrome

-€10.63
Out of Stock

DRAG SPECIALTIES Universal Stainless Steel Braided Oil Line — 11/32" ID, 24" L,...

Braided stainless steel oil line for universal fit. Includes chrome compression fittings for easy installation. Measured overall, including fittings. Made in the USA.

€30.08 €40.71

-€73.73
Out of Stock

DRAG SPECIALTIES Legacy Gas Tank — 11.4 L (3 US gal), 22 mm outlet, raw finish

Precision-built Legacy Gas Tank with TIG-welded steel construction and unique custom styling. Ships unpainted; caps sold separately.

€208.35 €282.08

Tire Hugger Front Fender for Dresser — Fits 16–19" wheels, 6-1/4" width, Black E-coating

-€75.46
Out of Stock

KLOCK WERKS Tire Hugger Front Fender for Dresser — Fits 16–19" wheels,...

Stamped 14‑gauge steel front fender with 13‑step e-coated finish; laser cut, pre-drilled, includes mounting hardware. Made in the USA.

€293.45 €368.91

Tire Hugger Front Fender for Dresser — Black E-coating, 21" wheel, 5-11/16" inside mount

-€75.46
Out of Stock

KLOCK WERKS Tire Hugger Front Fender for Dresser — Black E-coating, 21"...

Stamped 14‑gauge steel front fender with 13‑step e-coating; laser cut and pre-drilled, includes mounting blocks and hardware.

€293.45 €368.91

Replacement Oil Line Seals — 6-pack, Black

-€1.47
Out of Stock

DRAG SPECIALTIES Replacement Oil Line Seals — 6-pack, Black

Replacement seals for stainless steel braided oil lines. Made in the USA.

€4.15 €5.62

Rear Fender — 99 cm (39") contour, 17.8 cm (7") inside mount, E-coating

-€123.26
Out of Stock

KLOCK WERKS Rear Fender — 99 cm (39") contour, 17.8 cm (7") inside mount,...

Pre-drilled rear fender with E-coating finish to resist rust; stamped in 14-gauge steel and made in the USA.

€479.33 €602.59

-€113.20
Out of Stock

KLOCK WERKS Rear Fender — E-coating

Pre-drilled rear fender stamped in 14-gauge US steel with E-coating to resist rust. Made in the USA.

€440.19 €553.39

-€8.06
Out of Stock

DRAG SPECIALTIES Gas Tank Knee Pads — black, pair

Sold as pair. Adds knee-area grip and protects tank contact points. Low-profile and easy to apply.

€22.80 €30.86

-€6.54
Out of Stock

DRAG SPECIALTIES Gas Tank Knee Pads — Black, Pair

Durable, non-slip protection for knee contact points; low-profile design and easy adhesive installation.

€18.50 €25.04

-€19.12
Out of Stock

DRAG SPECIALTIES Fuel/Oil Line — 9.5 mm (3/8"), 244 cm (8'), Black

Reinforced smooth-bore fuel and oil line that resists fuel and oil. Made in the USA.

€54.05 €73.17

$Hugger Series Front Fender — Fits 16\", 17\", 18\", 19\" wheels, Black$

-€75.46
Out of Stock

KLOCK WERKS Hugger Series Front Fender — Fits 16\", 17\", 18\", 19\"...

Pre-drilled, stamped construction for a consistent finish and minimal bodywork.

Thick profile adds front-end rigidity and can be trimmed or shaped for a custom look.

Resists rust and corrosion; sold each. Installation requires separate tire hugger mounting blocks (sold separately).

€293.45 €368.91

-€5.94
Out of Stock

DRAG SPECIALTIES Fuel/Oil Line — 12.7 mm (1/2"), 61 cm (24")

Reinforced, smooth-bore fuel- and oil-resistant line for reliable service.

€16.81 €22.75

Fuel Injected Rated Fuel Bottle — 3 L (0.8 US gal.), Clear, Black, Gold

-€33.71
Out of Stock

K&L SUPPLY Fuel Injected Rated Fuel Bottle — 3 L (0.8 US gal.), Clear,...

Fuel bottle for fuel-injected systems with a built-in fuel return; simple to use for testing and repairs.

€95.30 €129.01

Hugger Series Front Fender — 5-7/8" width, fits 21" wheel, Black

-€75.46
Out of Stock

KLOCK WERKS Hugger Series Front Fender — 5-7/8" width, fits 21" wheel, Black

Stamped, pre-drilled front hugger fender that adds rigidity and accepts custom shaping. E-coated for corrosion resistance. Made in USA. Requires Klock Werks Tire Hugger mounting blocks (sold separately).

€293.45 €368.91

-€15.35
Out of Stock

ALLOY ART Premium Fuel Tank Mounting Bushings — Aluminum, Weld-In, 6-pack

Durable polyurethane bushings for fuel tank mounting; chemical- and weather-resistant replacement for rubber mounts. Made in the USA.

€43.40 €58.75

Premium Fuel Tank Mounting Bushings — Fuel tank, weld-in, 10 pack, aluminum

-€32.97
Out of Stock

ALLOY ART Premium Fuel Tank Mounting Bushings — Fuel tank, weld-in, 10...

Gooden-Tight bushings feature injection-molded high-grade polyurethane with a two-piece air-pocketed design. Chemical- and weather-resistant; mounts like rubber but resists cracking and breakdown. Made in the USA.

€93.16 €126.13

-€8.04
Out of Stock

LA CHOPPERS Weld-On Gas/Oil Tank Tab Kit — weld-in mount, steel, black

Laser-cut 1/4" steel tabs, 5.9" L x 1.18" W, two 0.83" holes spaced 4.58" c-to-c; includes two tabs and four rubber grommets. Made in the USA.

€31.25 €39.29

Hugger Series Front Fender — 21" wheel, front, black, e-coated

-€75.46
Out of Stock

KLOCK WERKS Hugger Series Front Fender — 21" wheel, front, black, e-coated

Steel, pre-drilled front fender with e-coating for corrosion resistance. Made in the USA. Requires Klock Werks Tire Hugger mounting blocks (sold separately).

€293.45 €368.91

-€3.65
Out of Stock

COLONY Gas Tank Mounting Hardware Kit — cadmium plated

Complete bolt-and-nut kit to secure the gas tank. Made in the USA.

€14.17 €17.82

Hugger Series Front Fender — 4-1/2" wide, 21" wheel, inside mount 4-1/4", E-Coating, Black

-€75.46
Out of Stock

KLOCK WERKS Hugger Series Front Fender — 4-1/2" wide, 21" wheel, inside...

Thick, pre-drilled stamped front fender with a corrosion-resistant electrocoat. Made in the USA. Requires Tire Hugger mounting blocks (sold separately).

€293.45 €368.91

-€3.17
Out of Stock

COLONY Gas Tank Mounting Hardware Kit — Zinc plated

Complete gas tank mounting bolt and nut kit; made in the USA.

€8.93 €12.10

-€15.24
Out of Stock

DRAG SPECIALTIES Oil Filter Line Kit — Chrome

OEM-style oil feed and return lines kit with compression fitting, seals, ferrules and compression nuts for straightforward installation.

€43.06 €58.30

shop by category

Body & Frame

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Contact us

Products

Our company

shop by category

Body & Frame  

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Body & Frame