Body & Frame (2)

-€103.66

KLOCK WERKS Rear Fender — 99.7 cm contour, 17.8 cm inside mounting width

Pre-drilled for stock mounting, stamped in 14-gauge U.S. steel, e-coated for corrosion resistance, made in the USA.

€403.10 €506.76

Custom Gas Tank — 11.4 L (3 US gal.), Tunnel 3", Raw finish

-€36.49
Out of Stock

DRAG SPECIALTIES Custom Gas Tank — 11.4 L (3 US gal.), Tunnel 3", Raw finish

Peanut-style custom gas tank with chrome mounting hardware. Requires sealing prior to use.

€103.14 €139.63

-€113.20

KLOCK WERKS Rear Fender — Stock length, Rear, E-Coating

Pre-drilled to match stock mounting locations; heavy-gauge construction; corrosion-resistant finish; made in the USA.

€440.19 €553.39

Rear Fender — 99.7 cm (39-1/4") contour, 18 cm (7-1/8") width, E-coating finish

-€112.87

KLOCK WERKS Rear Fender — 99.7 cm (39-1/4") contour, 18 cm (7-1/8") width,...

Pre-drilled stamped steel rear fender with corrosion-resistant E-coating; made in the USA.

€438.93 €551.80

-€8.06

DRAG SPECIALTIES Gas Tank Knee Pads — black, pair

Sold as pair. Adds knee-area grip and protects tank contact points. Low-profile and easy to apply.

€22.80 €30.86

-€6.54

DRAG SPECIALTIES Gas Tank Knee Pads — Black, Pair

Durable, non-slip protection for knee contact points; low-profile design and easy adhesive installation.

€18.50 €25.04

Hugger Series Front Fender — Fits 16" , 17" , 18" , 19" wheels, Black, 30-1/2" contour

-€75.46

KLOCK WERKS Hugger Series Front Fender — Fits 16" , 17" , 18" , 19"...

Stamped, pre-drilled construction for consistent fit
E-coated finish for corrosion resistance
Adds front-end rigidity while allowing custom shaping
Made in the USA; mounting blocks sold separately

€293.45 €368.91

Fuel Injected Rated Fuel Bottle — 3 L (0.8 US gal.), Clear, Black, Gold

-€33.71

K&L SUPPLY Fuel Injected Rated Fuel Bottle — 3 L (0.8 US gal.), Clear,...

Fuel bottle for fuel-injected systems with a built-in fuel return; simple to use for testing and repairs.

€95.30 €129.01

Hugger Series Front Fender — 5-7/8" width, 21" wheel, Black

-€75.46

KLOCK WERKS Hugger Series Front Fender — 5-7/8" width, 21" wheel, Black

Thick, rigid design can be cut or shaped for a custom look.

Pre-drilled and stamped for consistent fit and reduced body work.

Electrocoated finish for corrosion resistance. Requires Tire Hugger mounting blocks (sold separately).

€293.45 €368.91

-€15.35

ALLOY ART Premium Fuel Tank Mounting Bushings — Aluminum, Weld-In, 6-pack

Durable polyurethane bushings for fuel tank mounting; chemical- and weather-resistant replacement for rubber mounts. Made in the USA.

€43.40 €58.75

Premium Fuel Tank Mounting Bushings — Fuel tank, weld-in, 10 pack, aluminum

-€32.97

ALLOY ART Premium Fuel Tank Mounting Bushings — Fuel tank, weld-in, 10...

Gooden-Tight bushings feature injection-molded high-grade polyurethane with a two-piece air-pocketed design. Chemical- and weather-resistant; mounts like rubber but resists cracking and breakdown. Made in the USA.

€93.16 €126.13

-€39.50

DRAG SPECIALTIES Rear Fender — Steel, Unfinished

Predrilled for OEM fender struts and license plate mount; ready for custom finishing.

€111.65 €151.15

-€8.04

LA CHOPPERS Weld-On Gas/Oil Tank Tab Kit — weld-in mount, steel, black

Laser-cut 1/4" steel tabs, 5.9" L x 1.18" W, two 0.83" holes spaced 4.58" c-to-c; includes two tabs and four rubber grommets. Made in the USA.

€31.25 €39.29

$Hugger Series Front Fender — 21\", 101 cm (39-3/4\"), Black$

-€75.46

KLOCK WERKS Hugger Series Front Fender — 21\", 101 cm (39-3/4\"), Black

Adds front-end rigidity and can be customized for a Kustom look. Pre-drilled and stamped for a consistent fit; protective finish resists rust. Made in the USA. Mounting blocks sold separately.

€293.45 €368.91

-€3.65
Out of Stock

COLONY Gas Tank Mounting Hardware Kit — cadmium plated

Complete bolt-and-nut kit to secure the gas tank. Made in the USA.

€14.17 €17.82

Hugger Series Front Fender — 21" wheel, 39.5" contour, Black

-€75.46

KLOCK WERKS Hugger Series Front Fender — 21" wheel, 39.5" contour, Black

Stamped, pre-drilled front fender that increases front-end rigidity and accepts customization. Protective corrosion-resistant finish. Made in the USA.

€293.45 €368.91

-€3.17

COLONY Gas Tank Mounting Hardware Kit — Zinc plated

Complete gas tank mounting bolt and nut kit; made in the USA.

€8.93 €12.10

6" Front Fender — 6" W (inside), 7-1/4" inside mounting width, Raw

-€27.90

DRAG SPECIALTIES 6" Front Fender — 6" W (inside), 7-1/4" inside mounting width,...

Raw stamped steel front fender, measures approximately 6" W (inside), mounts with original equipment hardware.

€78.85 €106.75

-€2.36

COLONY Gas Tank Mounting Hardware Kit — Chrome plated

Complete bolt and nut kit for mounting gas tanks. Made in the United States.

€6.67 €9.03

-€16.88

DRAG SPECIALTIES Kickstand — 203 mm (8"), Black

Replaces OEM kickstands and supports lowered suspension setups and common Harley models.

€47.70 €64.58

-€4.12
Out of Stock

COLONY Gas Tank Mounting Hardware Kit — Chrome plated

Bolt-and-nut mounting kit for gas tanks; made in the USA.

€16.05 €20.17

Heavy-Duty Front Fender — Steel, Unfinished

-€43.16

DRAG SPECIALTIES Heavy-Duty Front Fender — Steel, Unfinished

Heavy-duty construction, raw finish, pre-drilled for OEM hardware, smooth style with no trim holes.

€121.99 €165.15

-€124.72

DRAG SPECIALTIES One-Piece Extended Gas Tank — 19.3 L (5.1 US gal), extended 2 in

5.1-gallon one-piece extended tank, unpainted. Seat nose may require modification; caps not included.

€352.43 €477.15

-€149.45

DRAG SPECIALTIES One-Piece Extended Gas Tank — 5.1 US gal., 2 in.

5.1-gallon one-piece extended gas tank, 2 in. longer, ships unpainted; seat nose or sending unit may require modification.

€422.39 €571.84

One-Piece 2" Extended Gas Tank — 4.2 US gal, 22 mm outlet, Raw

-€104.79

DRAG SPECIALTIES One-Piece 2" Extended Gas Tank — 4.2 US gal, 22 mm outlet, Raw

One-piece, bolt-on 2" extended gas tank. Approximately 4.2 gallons; accepts late-style 22 mm petcock. Seat nose may require modification; custom gauge mounting required.

€296.17 €400.96

OEM Rear Fender — 18.5 cm (7-1/4 in), unfinished

-€31.07

DRAG SPECIALTIES OEM Rear Fender — 18.5 cm (7-1/4 in), unfinished

Direct OEM replacement rear fender made from stamped steel; pre-drilled and accepts all OE components and the taillight assembly.

€87.80 €118.87

-€1.88

DRAG SPECIALTIES Replacement Gas Tank Bung — Weld-In, Chrome

Weld-in bung for custom fuel-tank filler mounting; accepts '84-E'96 screw-in gas caps.

€5.32 €7.20

-€25.69
Out of Stock

DRAG SPECIALTIES FXR Rear Fender — Unfinished, Steel

Raw steel rear fender, pre-drilled for OEM fender struts, license plate and taillight; designed for FXR fitment.

€72.60 €98.29

-€8.71

DRAG SPECIALTIES Tank Trim — Chrome, Black, Bolt-On

Polished center panel for split tanks; replaces the stock center panel.

€24.65 €33.36

One-Piece Smooth-Top Style Extended Gas Tank — 22-1/2" L × 16" W, 15.1 L (4 US gal), Raw

-€85.48

DRAG SPECIALTIES One-Piece Smooth-Top Style Extended Gas Tank — 22-1/2" L × 16"...

One-piece smooth-top extended gas tank that eliminates the dash and adds approximately 4 gallons of capacity. Includes necessary mounting hardware; '96-'99 require pre-'96 petcock.

€241.55 €327.03

shop by category

Body & Frame

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Contact us

Products

Our company

shop by category

Body & Frame  

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Body & Frame