Body & Frame (2)

Mustang Gas Tank — 12.5 L (3.3 gal), 19-3/4" L × 11-1/2" W × 7-1/2" H

-€46.45

DRAG SPECIALTIES Mustang Gas Tank — 12.5 L (3.3 gal), 19-3/4" L × 11-1/2" W ×...

Fat Bob-style low-tunnel gas tank, single-cap design, ~3.3 gal capacity. Not for fuel-injected models. Ships unpainted.

€131.30 €177.75

-€1.87

DRAG SPECIALTIES Fuel Pump Door Seal — Brown, Rubber

Replacement component that meets or exceeds OEM specification. Replacement screws sold separately; top plate screws are single‑use.

€5.31 €7.18

-€5.38

DRAG SPECIALTIES Easy Find Kickstand Extension — Chrome

Adds surface area to make hard-to-reach side stands easier to operate; includes mounting hardware; drilling required.

€15.22 €20.60

-€125.78

KLOCK WERKS WFB™ Benchmark Rear Fender — 7.125" wide, rear fitment, E-Coating

Heavy-gauge stamped rear fender with extended length and included mounting hardware for direct replacement.

€489.11 €614.89

Universal Stainless Steel Braided Oil Line — 23 cm, 8.7 mm ID, 1/8" NPT, Chrome

-€8.40
Out of Stock

DRAG SPECIALTIES Universal Stainless Steel Braided Oil Line — 23 cm, 8.7 mm ID,...

Universal braided oil line with compression fittings; measured overall including fittings. Made in the USA. Sold each.

€23.75 €32.15

-€10.60
Out of Stock

DRAG SPECIALTIES Custom Oil Dipstick — Chrome, Swivel

Plated peaked cap with exact OEM-fit measuring assembly; includes a pivoting rod for easy oil-level checks.

€29.97 €40.57

-€1.25
Out of Stock

DRAG SPECIALTIES Kickstand Spring — 100.1 mm (3.94 in), Chrome

Reliable replacement kickstand spring with easy installation and consistent tension.

€3.55 €4.80

-€27.10
Out of Stock

KURYAKYN Boomerang Frame Covers — Chrome, Pair

Chrome Boomerang frame covers; wrap front and rear edges; not for use with passenger floorboards.

€105.39 €132.49

WFB™ Benchmark Front Fender — 6-1/2" width, 21" wheel

-€75.46
Out of Stock

KLOCK WERKS WFB™ Benchmark Front Fender — 6-1/2" width, 21" wheel

Stamped 14-gauge U.S. steel front fender with rivetless sides, pre-drilled mounting, and extended rear tail. Made in USA.

€293.45 €368.91

Universal Stainless Steel Braided Oil Line — 10" length, 1/8" NPT fitting, 11/32" ID, Chrome

-€8.55

DRAG SPECIALTIES Universal Stainless Steel Braided Oil Line — 10" length, 1/8"...

Includes compression fittings, measured overall including fittings, made in the USA.

€24.17 €32.72

-€4.89

DRAG SPECIALTIES Fuel Pump Door Seal — Fuel pump door, Green

Meets or exceeds OEM specification. Replacement screws sold separately. Top plate screws are single-use and should be replaced when removed.

€13.82 €18.71

$Universal Stainless Steel Braided Oil Line — 1/8\" NPT, 8.7 mm (11/32\"), 28 cm (11\")$

-€8.70
Out of Stock

DRAG SPECIALTIES Universal Stainless Steel Braided Oil Line — 1/8\" NPT, 8.7 mm...

Universal oil line with compression fittings; measured overall including fittings; made in the USA.

€24.60 €33.30

-€5.38

DRAG SPECIALTIES Easy Find Kickstand Extension — Chrome

Makes hard-to-reach kickstands easier to operate. Includes mounting hardware. Drilling required.

€15.22 €20.60

WFB™ Benchmark Front Fender — 6-1/2" fender, fits 16"/17"/18"/19" wheels, black

-€75.46

KLOCK WERKS WFB™ Benchmark Front Fender — 6-1/2" fender, fits...

Stamped 14-gauge U.S. steel, E-coated to resist rust; pre-drilled, rivetless smooth sides, extended 1.5" rear tail. Pairs with WFB™ rear fender. Made in the USA.

€293.45 €368.91

Universal Stainless Steel Braided Oil Line — 1/8" NPT, 11/32" ID, 12" length, Chrome

-€8.85
Out of Stock

DRAG SPECIALTIES Universal Stainless Steel Braided Oil Line — 1/8" NPT, 11/32"...

Stainless steel braided oil line with chrome compression fittings. Measured overall including fittings. Made in the USA.

€25.00 €33.85

-€12.95
Out of Stock

DRAG SPECIALTIES Custom Oil Dipstick — Swivel, Chrome

Polished plated cap with clean "peaked" design. Exact OEM replacement. Includes pivoting measurement stem.

€36.59 €49.54

-€19.73
Out of Stock

DRAG SPECIALTIES Kickstand — Shortens 25.4 mm (1"), 197 mm (7-3/4"), Chrome

Direct-fit replacement kickstand suitable for lowered and stock motorcycles.

€55.77 €75.50

Universal Stainless Steel Braided Oil Line — 11/32" ID, 13" length, 1/8" NPT, Chrome

-€9.00

DRAG SPECIALTIES Universal Stainless Steel Braided Oil Line — 11/32" ID, 13"...

Flexible metal-wrapped hose with included compression fittings; measured overall for accurate fit. Made in USA.

€25.44 €34.44

-€13.39
Out of Stock

DRAG SPECIALTIES Pop-Up Gas Cap — 59.90 mm (2.36") , Black

Billet aluminum pop-up gas cap that fits nearly flush and opens with a quarter-turn. Uses OEM-style gasket for a secure seal.

€37.84 €51.23

-€5.22

DRAG SPECIALTIES Fuel Pump Door Seal — Gray

Restores a watertight seal at the fuel pump access cover to help prevent leaks and contamination.

€14.76 €19.98

Universal Stainless Steel Braided Oil Line — 14" length, 11/32" ID, 1/8" NPT, chrome

-€9.14
Out of Stock

DRAG SPECIALTIES Universal Stainless Steel Braided Oil Line — 14" length,...

Universal stainless steel braided oil line; includes 1/8" NPT chrome compression fittings; measured overall including fittings; made in USA.

€25.86 €35.00

Universal Stainless Steel Braided Oil Line — 8.7 mm (11/32") ID, 38 cm (15") length, 1/8" NPT fitting, chrome

-€9.31

DRAG SPECIALTIES Universal Stainless Steel Braided Oil Line — 8.7 mm (11/32")...

Universal braided stainless steel oil line. Measured overall including fittings; includes compression fittings. Made in the USA.

€26.27 €35.58

-€53.21

DRAG SPECIALTIES Oil Tank — 3.0 qt, Gloss Black

Replacement oil tank for custom motorcycles. Includes filler cap for easy servicing.

€150.38 €203.59

Hugger Series Front Fender — 21" wheel, 5-15/16" outside mounting width

-€75.46

KLOCK WERKS Hugger Series Front Fender — 21" wheel, 5-15/16" outside...

Steel front fender adds rigidity, comes stamped and pre-drilled for a consistent finish, resists corrosion; mounting blocks sold separately.

€293.45 €368.91

Universal Stainless Steel Braided Oil Line — 1/8" NPT, 8.7 mm (11/32") ID, 40.5 cm (16"), chrome

-€9.45

DRAG SPECIALTIES Universal Stainless Steel Braided Oil Line — 1/8" NPT, 8.7 mm...

Durable braided oil line with compression fittings; measured overall and made in the USA. Sold each.

€26.68 €36.13

-€2.25
Out of Stock

KURYAKYN Chrome Kickstand Spring — 100.1 mm

Replacement kickstand spring restores function and improves appearance.

€8.76 €11.01

-€169.22

CUSTOM CYCLE ENGINEERING Pivot Shaft — 5/8 in (16.6 mm), kit

Pair of cylindrical metal bushings with vulcanized rubber to stabilize the swing arm and reduce vibration.

€658.02 €827.24

Universal Stainless Steel Braided Oil Line — 17" length, 1/8" NPT fittings, 11/32" (8.7 mm), Chrome

-€9.60

DRAG SPECIALTIES Universal Stainless Steel Braided Oil Line — 17" length, 1/8"...

Stainless steel braided oil line with 1/8" NPT chrome compression fittings. Measured overall; made in the USA.

€27.13 €36.73

-€70.64

DRAG SPECIALTIES Oil Tank — Side-fill, 3 qt, Black

OEM-style side-fill design for a clean, factory look. Durable construction and straightforward installation.

€199.60 €270.24

-€7.50

DRAG SPECIALTIES Fuel Pump Door Seal — Gray, I01-0143V

Direct-fit replacement that meets or exceeds OEM specification. Replacement screws sold separately.

€21.22 €28.72

shop by category

Body & Frame

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Contact us

Products

Our company

shop by category

Body & Frame  

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Body & Frame