Body & Frame (2)

-€16.88

DRAG SPECIALTIES [object Object]

High-strength steel kickstand. Direct OEM replacement. Under-stock options for lowered suspension. Measured from first top bend to first bottom bend for Big Twin, Softail, FLT and XL.

€47.70 €64.58

-€16.88

DRAG SPECIALTIES [object Object]

High-strength steel kickstand; direct OEM replacement; under-stock lengths available for lowered suspension; measured from the first bend to the first bend for Big Twin, Softail, FLT and XL.

€47.70 €64.58

-€13.73

DRAG SPECIALTIES [object Object]

High-strength steel kickstand — direct OEM replacement; under-stock lengths available for lowered suspension.

€38.78 €52.51

-€27.90

DRAG SPECIALTIES 6" Front Fender — 6" width, front mount, unfinished

Raw stamped-steel front fender; measures approximately 6" W (inside). Mounts with OE hardware. Sold each.

€78.85 €106.75

-€16.88

DRAG SPECIALTIES [object Object]

High-strength steel kickstand that replaces OEM units and is available in under-stock length for lowered suspension. Measurement: Big Twin, Softail, FLT and XL kickstands are measured from the first bend at the top to the first bend at the bottom.

€47.70 €64.58

-€16.88

DRAG SPECIALTIES [object Object]

High-strength steel kickstand that replaces OEM units for a precise fit; under-stock length suitable for lowered suspension. Measured for Big Twin, Softail, FLT and XL from the first bend at the top to the first bend at the bottom.

€47.70 €64.58

Heavy-Duty Front Fender — Unfinished, front

-€43.16

DRAG SPECIALTIES Heavy-Duty Front Fender — Unfinished, front

Heavy-duty construction, raw finish, pre-drilled for OEM hardware, smooth style without trim holes.

€121.99 €165.15

-€0.37

TECMATE [object Object]

Heat-resistant ABS puck that spreads the load and stabilizes the side stand on soft or hot surfaces. Oval shape with splash-guard rim and 5 mm tether hole. 14 x 12 cm.

€6.53 €6.90

Heavy-Duty Front Fender — Front, Unfinished steel

-€37.56

DRAG SPECIALTIES Heavy-Duty Front Fender — Front, Unfinished steel

Rugged, pre-drilled front fender with a smooth profile—no holes for trim, fender tip, or skirt. Raw finish and straightforward OEM installation.

€106.16 €143.72

-€1.14

DRAG SPECIALTIES [object Object]

Durable kickstand spring; measured from hook to hook to ensure correct fit.

€3.24 €4.38

-€27.90

DRAG SPECIALTIES 6" Front Fender — front mount, 7-1/2" inside mounting width

Raw stamped steel front fender; measures approx. 6" W (inside). Mounts with OE hardware. Requires lower fender skirt if trim holes are present.

€78.85 €106.75

-€1.06

DRAG SPECIALTIES [object Object]

Durable replacement kickstand spring measured hook-to-hook for accurate fit and reliable tension.

€3.00 €4.06

6" Front Fender — 6" inside width, front mount, with trim holes, unfinished

-€27.90

DRAG SPECIALTIES 6" Front Fender — 6" inside width, front mount, with trim...

Raw stamped steel front fender; mounts with OE hardware. Fenders with trim holes require lower fender skirt.

€78.85 €106.75

-€1.68

DRAG SPECIALTIES [object Object]

Direct-fit kickstand spring. Springs are measured from hook to hook.

€4.75 €6.43

-€14.93

DRAG SPECIALTIES OEM Rear Fender — 7-1/4" (18.5 cm), Unfinished

Direct OEM replacement rear fender; pre-drilled, accepts OE components and taillight assembly, and fits original fender struts and mounting hardware.

€42.22 €57.15

-€1.28

DRAG SPECIALTIES [object Object]

Replacement kickstand spring measured from hook to hook. High-tensile steel with corrosion-resistant finish. Verify fitment before purchase.

€3.63 €4.91

-€1.34

DRAG SPECIALTIES [object Object]

Replacement kickstand spring. Springs are measured from hook to hook for accurate fit.

€3.78 €5.12

-€19.72

DRAG SPECIALTIES Custom Rear Fender — 77 cm L x 18 cm W, Unfinished

Raw steel rear fender; not pre-drilled and no taillight or license plate mount. Measures approx 30" L x 7-1/8" W. Each.

€55.73 €75.45

-€1.25

DRAG SPECIALTIES [object Object]

Durable kickstand spring measured from hook to hook for reliable operation and easy replacement.

€3.55 €4.80

-€25.47

DRAG SPECIALTIES Rear Fender — Unfinished, raw steel

Predrilled for OEM fender struts and license plate mount. Raw steel finish ready for customization.

€71.95 €97.42

-€6.76

DRAG SPECIALTIES [object Object]

Kickstand extension that makes hard-to-reach kickstands easier to operate. Includes mounting hardware. Drilling required.

€19.10 €25.86

-€26.56

DRAG SPECIALTIES Rear Fender — Raw finish, rear mount

Raw steel finish; predrilled for OEM fender struts and license plate mount. Sold each.

€75.07 €101.63

-€6.76

DRAG SPECIALTIES [object Object]

Extension plate that makes hard-to-reach kickstands easier to operate; includes mounting hardware; drilling required.

€19.10 €25.86

-€35.34

ARLEN NESS Wrapper Front Fender — 26" Black

Race-inspired, lightweight composite fender with direct bolt-on fitment. Made in the U.S.A.

€138.75 €174.09

-€2.14

DRAG SPECIALTIES [object Object]

Rubber bumper that clips to the round frame tube under the primary cover — ideal for custom applications.

€6.03 €8.17

Benchmark Front Fender for Dresser — 6.5" fender, 21" wheel fit, non-raked frame, black

-€82.92

KLOCK WERKS Benchmark Front Fender for Dresser — 6.5" fender, 21" wheel...

Durable front fender stamped from heavy U.S. steel with chrome mounting blocks; suitable for Dresser-style applications and custom builds. Made in the U.S.A.

€322.47 €405.39

-€1.84

DRAG SPECIALTIES [object Object]

Replacement brass bushings for kickstand — durable, corrosion‑resistant and easy to install.

€5.22 €7.06

Benchmark Front Fender for Dresser — 6-1/2" Fender, 26" wheel fit, raked frame, Black

-€64.12

KLOCK WERKS Benchmark Front Fender for Dresser — 6-1/2" Fender, 26" wheel...

Stamped 14-gauge steel front fender, E-coated for corrosion resistance, includes chrome mounting blocks. Made in the U.S.A.

€249.36 €313.48

Tire Hugger Front Fender for Dresser — 16" ,17" ,18" ,19" wheels, 39-1/2" contour, Black E-Coating

-€82.92

KLOCK WERKS Tire Hugger Front Fender for Dresser — 16" ,17" ,18" ,19"...

Stamped 14-gauge steel front fender with 13-step E-coated finish; laser cut and pre-drilled for precise fit. Includes mounting blocks and hardware.

€322.47 €405.39

$Tire Hugger Front Fender for Dresser — Fits 16\", 17\", 18\", 19\" wheels, Black E-Coating$

-€82.92

KLOCK WERKS Tire Hugger Front Fender for Dresser — Fits 16\", 17\", 18\",...

Stamped 14‑gauge steel front tire hugger with 13‑step e‑coated finish; laser cut and pre‑drilled. Includes mounting blocks and hardware. Made in the USA.

€322.47 €405.39

shop by category

Body & Frame

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Contact us

Products

Our company

shop by category

Body & Frame  

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Body & Frame