TOOLS

Pinion Gear Locker Tool — pinion gear, Black

-€16.21

JIMS Pinion Gear Locker Tool — pinion gear, Black

Locks the gear while torquing the nut; aligns under the gear and screws into the case. Made in the U.S.A.

€63.02 €79.23

Tri-fold Adjustable Ramp — 76 in length, 52 in width

-€25.00

MOOSE OFFROAD FOUR WHEEL Tri-fold Adjustable Ramp — 76 in length, 52 in width

Adjustable tri-fold ramp, fits 42–52 in, 1,250-lb. distributed capacity, bar-style traction surface; includes E‑Z grip rubber truckrests and nylon straps. Do not ride ATV on ramp.

€224.95 €249.95

$Arched Aluminum Folding Ramp — 229 cm (90\") length, 270 kg (595 lb) load capacity$

-€10.09

MOOSE OFFROAD HARD-PARTS Arched Aluminum Folding Ramp — 229 cm (90\") length, 270 kg...

Durable, lightweight aluminum arched folding ramp with E-Z grip rubber rests and nylon safety straps. Weighs only 13 lb. Maximum load 600 lb. Do not ride motorcycle on ramp.

€90.86 €100.95

-€27.89

MOOSE OFFROAD HARD-PARTS 6 Foot Ramp — 6 ft, 300 lb capacity, 4-pack

Aircraft-aluminum straight ramp with dimpled traction holes, rubber-coated tongue and stop-pin. Sold to dealers in 4-packs. Do not ride a motorcycle on the ramp.

€251.06 €278.95

$Aluminum Straight Folding Ramp — 213 cm (84\") , 180 kg (396 lb)$

-€8.00

MOOSE OFFROAD HARD-PARTS Aluminum Straight Folding Ramp — 213 cm (84\") , 180 kg (396 lb)

Folding straight aluminum ramp with rubber-coated fingers; folds flat for storage. Max load: 400 lb. Do not ride motorcycle on ramp.

€71.95 €79.95

-€55.00

MOOSE OFFROAD FOUR WHEEL UTV Loading Ramp — 241 cm (95"), 45.5 cm (18"), Aluminum

Heavy-duty loading ramps with EZ-grip rubber rests and nylon straps. Do not ride UTV or ATV on the ramp.

€494.95 €549.95

Sprocket Lock Tool — Crankshaft, camshaft, Black

-€23.73

JIMS Sprocket Lock Tool — Crankshaft, camshaft, Black

Locks camshafts and crankshaft sprockets for safe removal, replacement and torquing. Includes instructions. Made in the U.S.A.

€92.27 €116.00

-€84.43

JIMS Inner Cam Bearing Removal Tool — Kit, Black

Purpose-built tool for removing inner cam bearings without damaging the crankcase; includes instructions and retention design to prevent rollers from falling into the engine.

€328.33 €412.76

-€9.82

JIMS Replacement Wheel Bearing Expander Rod — Black

Replacement expander rod for sealed wheel bearing remover/installer kits. Made in the USA.

€38.18 €48.00

-€99.44

JIMS Case Splitter Tool — Crankcase, Black

Separates sealed engine case halves using a hand thread-in pushing screw; bolts to primary mounting holes. Made in the U.S.A.

€386.69 €486.13

-€27.02

JIMS Valve Spring Compressor — Valve Spring, Gray

Removes and replaces valves and new-style conical valve springs. Requires the dedicated valve spring compressor tool. Made in the U.S.A.

€105.09 €132.11

-€16.21

JIMS Pinion Gear Locker Tool — Pinion gear, Black

Locks the pinion gear for torquing the pinion nut. Easy to align and install.

€63.02 €79.23

Harley Davidson Cruise Drive 6-Speed Main Drive Gear Installer Tool — Black

-€110.03

JIMS Harley Davidson Cruise Drive 6-Speed Main Drive Gear Installer...

Holds the main drive gear square to its bearing bore and installs it without removing the transmission. Made in the USA.

€427.86 €537.89

Heavy Duty Straight-Folding Ramp — 80" x 11" (203 x 28 cm), 362 kg (800 lb), Powder Coated

-€9.89

MOOSE OFFROAD HARD-PARTS Heavy Duty Straight-Folding Ramp — 80" x 11" (203 x 28 cm),...

Center-folding mesh ramp with welded carrying handle, rubber-coated fingers, and included tie down straps. Warning: do not ride motorcycles or ATVs on the ramp.

€89.06 €98.95

Recovery/Traction Boards — 104 cm (41"), 30 cm (11.75"), 10,000 lb capacity, red

-€7.19

MOOSE OFFROAD HARD-PARTS Recovery/Traction Boards — 104 cm (41"), 30 cm (11.75"),...

Reinforced nylon recovery boards that flex under load and assist in freeing vehicles from mud, snow, and sand. Mounting hardware included.

€64.76 €71.95

Harley Davidson Cruise Drive 6-Speed Transmission Main Bearing Installer Tool — Black

-€71.05

JIMS Harley Davidson Cruise Drive 6-Speed Transmission Main Bearing...

Safely installs main transmission case bearings in Harley Davidson Cruise Drive 6-Speed units without removing the bearing; holds bearing square to bore; made in the USA.

€276.32 €347.37

$Recovery/Traction Boards — 104 cm (41\"), 30 cm (11-3/4\"), 10,000 lb capacity$

-€7.19

MOOSE OFFROAD HARD-PARTS Recovery/Traction Boards — 104 cm (41\"), 30 cm (11-3/4\"),...

Durable reinforced nylon recovery boards offering flexibility and support for recoveries in mud, snow, and sand; mounting hardware included.

€64.76 €71.95

-€16.38

JIMS Primary Locking Bar — Front engine sprocket, Black

Immobilizes the primary drive for safe maintenance; use with a torque wrench or breaker bar. Made in the U.S.A.

€63.72 €80.10

-€57.61

JIMS Transmission Sprocket Locknut Wrench — Black

Extra-long two-piece wrench designed to remove the hex nut at the end of the main drive gear. Inner collar retains wrench to nut for safer work.

€224.02 €281.63

-€8.25

JIMS Shifter Fork Shaft Removal Tool — Black, Chrome

Loosens and removes both shifter shafts from the transmission door for easy disassembly. Made in the USA.

€32.09 €40.34

Harley Davidson Cruise Drive Trap Door Bearing Remover and Installer — 6-speed, Black

-€89.22

JIMS Harley Davidson Cruise Drive Trap Door Bearing Remover and...

Installs and removes lubed ball bearings into transmission trap doors; no arbor press required. Made in the U.S.A.

€346.97 €436.19

Replacement Puller Plate — Black, Chrome

-€21.50

JIMS Replacement Puller Plate — Black, Chrome

Spare extraction plate for mainshaft bearing race tools. Made in the USA.

€83.63 €105.13

-€54.83

JIMS Driver Handle — 6-Speed, Blue anodized

Tool for installing the main drive gear oil seal with a protective sleeve; made in the U.S.A.

€154.89 €209.72

25 mm Wheel Bearing Adapter — 25 mm, 2007–2019 Harley-Davidson fit, Black

-€21.10

JIMS 25 mm Wheel Bearing Adapter — 25 mm, 2007–2019 Harley-Davidson...

Made in the USA. For use with 25 mm wheel bearings on 2007–2019 Harley-Davidson® models. Precision-machined adapter for safe bearing removal.

€82.06 €103.16

-€42.16

JIMS 49mm Fork Seal and Dust Shield Installer — Blue

Installs lower leg 49 mm fork seals squarely without damaging the seal lip. Two-piece design for easier assembly and dust shield cover installation. Made in the U.S.A.

€163.95 €206.11

-€11.19

MOOSE OFFROAD HARD-PARTS Metric Flywheel Puller Set — 10-piece, M14–M28 thread sizes

Metric 10-piece puller set includes common M14–M28 thread pitches and a storage case for organized transport.

€100.76 €111.95

Inner Primary Bearing and Seal Removal and Installation Tool — Black, Chrome

-€69.45

JIMS Inner Primary Bearing and Seal Removal and Installation Tool —...

Precision tool for removal and installation of inner primary bearings and seals; eliminates the need for a press and reduces risk of part damage.

€270.08 €339.53

Late Model Wheel Bearing Puller/Hub Protector Support Plate — Black

-€31.10

JIMS Late Model Wheel Bearing Puller/Hub Protector Support Plate —...

Plate attaches to brake rotor mounting holes to provide a stable surface for bearing removal and installation; fits open-hub wheels with 5 or 7 lugs. Made in USA.

€120.93 €152.03

Ultimate Clutch Adjusting Tool — Blue, Chrome, '85-'20 Big Twins

-€20.57

JIMS Ultimate Clutch Adjusting Tool — Blue, Chrome, '85-'20 Big Twins

Quickly and accurately tighten the clutch adjusting screw jam nut without moving the screw. Includes Allen wrench that stores in the handle. Made in the USA. Fits all '85-'20 Big Twins with mechanical clutch.

€79.99 €100.56

-€22.28

JIMS XL Sprocket Nut Socket Tool — Black

Short socket designed to remove, install and properly tighten the front final drive sprocket/pulley on Harley-Davidson® Sportster models; provides full contact to the nut.

€86.61 €108.89

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS