TOOLS

On sale!
-€13.42

PEDRO'S Multitool — PEDRO'S, Black, Steel

Compact 12-function folding multitool, 163 grams. Ergonomic composite handle. Includes 2.5, 3, 4, 5, 6 and 8 mm hex keys, flat blade driver, M7 spoke wrench and removable 1–11 speed chain tool with integrated 3.2, 3.3 and 3.5 mm spoke wrenches.

€12.39 €25.81

Racer Mini-Pro T-Handle Tool Set — 171.5 mm, 8 mm, 10 mm, 12 mm, 13 mm, 14 mm, pewter, nickel

-€9.91

MOTION PRO Racer Mini-Pro T-Handle Tool Set — 171.5 mm, 8 mm, 10 mm, 12...

Compact T-handle set with vinyl pouch and chrome-vanadium shafts for easy transport and quick access.

€28.00 €37.91

-€2.81

MOTION PRO Dual Drive Mini T-Handle Tool — 3/8" drive, 196.9 mm (7-3/4")

T-handle and shaft-drive combination for tight access and quick fastener work.

€7.95 €10.76

-€2.29

MOTION PRO Dual Drive Mini T-Handle Tool — 1/4" drive, 165.1 mm (6-1/2")

T-handle and shaft drive for tight access; works with sockets, hex drives and crow's foot adapters; compact and durable.

€6.49 €8.78

Ti Prolight™ Wrench Set — 8 mm, 10 mm, 12 mm, 14 mm, Silver

-€56.57

MOTION PRO Ti Prolight™ Wrench Set — 8 mm, 10 mm, 12 mm, 14 mm, Silver

Extremely lightweight — less than one quarter the weight of a standard wrench. Exclusive optimized design with an ergonomic handle. Not intended for everyday shop use.

€159.90 €216.47

-€32.63

MOTION PRO Deluxe Suspension Bearing Service Tool — Blue anodized

Quick removal and precise installation of 20 mm and 22 mm suspension bearings; includes blind bearing collet and protective case.

€188.30 €220.93

-€8.87

MOTION PRO Metric Socket T-Handle Set — Set of 4, 8 mm, 10 mm, 12 mm, 14 mm

Slim, durable socket set with an ergonomic handle and deep six-point sockets; includes a vinyl storage pouch.

€25.06 €33.93

Metric Socket T-Handle Set — 8 mm, 10 mm, 12 mm, 14 mm, 17 mm, 19 mm, set of 6

-€15.97

MOTION PRO Metric Socket T-Handle Set — 8 mm, 10 mm, 12 mm, 14 mm, 17 mm,...

Six-piece metric T-handle socket set with slim-profile sockets that let you start nuts hands-free. Includes vinyl storage pouch.

€45.13 €61.10

-€10.30

MOTION PRO 1/4" Hex Bit T-Handle Driver Spinner — 1/4" hex, 203.2 mm...

Bearing-mounted T-handle spinner for fast bolt and nut removal. Magnetic 1/4" hex drive holds bits securely. Bits not included.

€29.13 €39.43

T-Handle Bit Driver with JIS Cross-Head Bits — 215.9 mm (8.5"), chrome

-€8.56

MOTION PRO T-Handle Bit Driver with JIS Cross-Head Bits — 215.9 mm...

T-handle bit driver with magnetic heads and included JIS cross-head bits #1–#3; narrow profile fits tight spaces.

€24.23 €32.79

-€8.56

MOTION PRO Spinner II T-Handle Tool with Swivel Drive — 12" (30.5 cm),...

Bearing-mounted spinner for faster bolt and nut removal. Two-step drive head for swivel or fixed drive. Chrome-vanadium handle with padded grip.

€24.23 €32.79

Flywheel Puller Right Hand Internal Thread — M30 x 1.0, Black oxide

-€8.86

MOTION PRO Flywheel Puller Right Hand Internal Thread — M30 x 1.0, Black...

Durable, heat-treated puller for safe flywheel or rotor removal. Right hand thread. Lifetime limited warranty.

€25.06 €33.92

-€8.59

MOTION PRO Spinner II T-Handle Tool with Swivel Drive — 12", 1/4", Blue

Bearing-mounted spinner for faster bolt and nut removal; two-step drive head for swivel or fixed drive; padded grip for comfort.

€24.26 €32.85

Flywheel Puller Right Hand Internal Thread — M24 x 1.5, right-hand thread, black oxide

-€8.70

MOTION PRO Flywheel Puller Right Hand Internal Thread — M24 x 1.5,...

Precision flywheel puller with right-hand internal thread. Heat treated, durable protective finish, lifetime limited warranty.

€24.60 €33.30

Compression Bolt Removal Tool — WP 4860 MXMA CC fit, 17 mm hex, Blue anodized

-€4.88

MOTION PRO Compression Bolt Removal Tool — WP 4860 MXMA CC fit, 17 mm...

Removes and installs the compression valve assembly from the fork cap. 17 mm hex head; enables correct torquing during installation. Use caution — fork cap assembly under pressure.

€13.80 €18.68

Gear Jammer™ — Primary gear, Blue anodized

-€4.43

MOTION PRO Gear Jammer™ — Primary gear, Blue anodized

Removes and installs primary gear on Honda CRF450R/X. Locks gears for easy service, allows correct torque on lock nuts, not for impact guns.

€12.53 €16.96

Wall Bracket for T-Handle Rack — Chrome, Silver

-€5.91

MOTION PRO Wall Bracket for T-Handle Rack — Chrome, Silver

Mounts a T-handle rack to a toolbox, wall or post; quick-release pin and built-in bottle opener; fits one-piece T-handle racks.

€16.70 €22.61

ForkTru™ Fork Alignment Tool — 27–62 mm legs, 140–220 mm on center, Blue anodized

-€10.24

MOTION PRO ForkTru™ Fork Alignment Tool — 27–62 mm legs, 140–220 mm on...

Tool for aligning front forks to ensure parallelism from top to bottom. Works with 27–62 mm fork legs and 140–220 mm on-center spacing. Knurled adjustment screws for easy setup and reduced seal/bushing wear.

€28.93 €39.17

Flywheel Puller Right Hand Internal Thread with M12 Cap — M28 x 1.0, black oxide

-€7.69

MOTION PRO Flywheel Puller Right Hand Internal Thread with M12 Cap — M28...

Heat-treated, high-carbon steel puller with right-hand internal thread and M12 cap. Laser-etched, hot black oxide finish and lifetime limited warranty.

€21.73 €29.42

-€22.19

MOTION PRO Flywheel Puller Internal Thread — M50 x 1.5, Black oxide

Removes flywheel or rotor. Heat-treated for strength. Laser-etched identification. Includes crank protector. Right-hand thread. Durable corrosion-resistant finish. Lifetime limited warranty.

€62.68 €84.87

Flywheel Puller/Primary Gear Extractor — Black oxide, Carbon steel

-€7.62

MOTION PRO Flywheel Puller/Primary Gear Extractor — Black oxide, Carbon...

Removes flywheels and rotors; includes 4 mm, 5 mm, and 6 mm hardware. Heat-treated, laser-etched, and backed by a lifetime limited warranty.

€21.56 €29.18

-€7.98

MOTION PRO Flywheel Puller — Internal thread, M28 x 1.0, Black oxide

Right hand internal-thread puller for removing flywheels or rotors; includes M14 cap and lifetime limited warranty.

€22.57 €30.55

Flywheel Puller Right Hand Internal Thread — M26 x 1.0, Black oxide

-€8.20

MOTION PRO Flywheel Puller Right Hand Internal Thread — M26 x 1.0, Black...

Precision right-hand internal-thread flywheel puller. Heat treated, laser etched, durable finish and lifetime limited warranty.

€23.18 €31.38

-€3.60

MOTION PRO Oil Filter Removal Tool — Black, Silver

Conical point screw pierces and grabs the sheet metal end cap for easy removal of recessed KTM oil filters. Not for use on reusable filters.

€10.16 €13.76

Flywheel Puller Right Hand Internal Thread — M38 x 1.5, black oxide

-€14.49

MOTION PRO Flywheel Puller Right Hand Internal Thread — M38 x 1.5, black...

Right hand internal thread flywheel puller; laser etched, heat treated, high carbon steel, durable finish, lifetime limited warranty.

€40.94 €55.43

-€15.23

MOTION PRO Deluxe Piston Pin Puller — Blue anodized

Removes piston pins from full skirt and short skirt (slipper) pistons. Fits pins 12 mm (1/2") to 24 mm (1"). Non-marring aluminum pin adapters and interchangeable piston adapters.

€43.05 €58.28

Counter Balancer and Clutch Hub Spanner for Honda — 20 mm ID, 3/8" driver, 4-pin spanner

-€2.96

MOTION PRO Counter Balancer and Clutch Hub Spanner for Honda — 20 mm ID,...

Heat-treated 4-pin spanner for removing Honda counter balancer and clutch hub nuts. 20 mm ID, for use with a 3/8" driver.

€8.38 €11.34

-€9.03

EPI Clutch Puller — Polaris, Brass

Precisely machined clutch puller with heat-treated metal construction. Individually packaged with instructions.

€35.13 €44.16

Clutch Compression Tool — Fits Yamaha, Polaris, Arctic Cat, Suzuki, Kawasaki, Textron, Kymco, John Deere, Comet

-€21.52

EPI Clutch Compression Tool — Fits Yamaha, Polaris, Arctic Cat,...

Allows one person to compress clutches for service work, remove and install helixes, change springs, and perform clutch maintenance.

€83.66 €105.18

-€1.94

EPI ATV/UTV Belt Removal Tool — Yamaha, secondary clutch

Holds the clutch open for safe belt removal. Compact and easy to store.

€7.52 €9.46

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS