TOOLS

-€25.68

KIBBLEWHITE Valve Guide Reamer — 181 mm (7.125"), Nickel

Precision reamer for valve guides designed for KPMI® manganese bronze and cast iron.

Do not use a reamer on bronze after it has been used on cast iron.

€72.64 €98.32

-€6.75

PEDRO'S Multitool — PEDRO'S, Black, Steel

Compact 12-function folding multitool, 163 grams. Ergonomic composite handle. Includes 2.5, 3, 4, 5, 6 and 8 mm hex keys, flat blade driver, M7 spoke wrench and removable 1–11 speed chain tool with integrated 3.2, 3.3 and 3.5 mm spoke wrenches.

€19.06 €25.81

-€11.41

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Red

Tool for quick removal and installation of the pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€44.40 €55.81

-€46.14

FEULING OIL PUMP CORP. Camplate Tool — PSI Relief Valve, Black, Red, Silver

Test and set cam plate relief valve pop-off psi. Includes air regulator, 0-100 psi gauge, gasket and hardware. Bench test before installation.

€179.42 €225.56

Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO, Red

-€26.33

FEULING OIL PUMP CORP. Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO,...

Mounts to the cam chest to measure crankshaft run out and Twin Cam gear drive backlash. Includes tool plate, +/- 0.001 dial indicator, and mounting hardware.

€102.40 €128.73

-€3.84

PEDRO'S Bicycle Chain Keeper — Black

Holds the chain off the frame when the rear wheel is removed so the drivetrain can turn freely for cleaning, storage, or transport. Quick-release lever for fast installation and removal.

€8.64 €12.48

-€3.89

FEULING OIL PUMP CORP. Pushrod Tube Holder — Pushrod Tube, Black

Holds pushrod tubes up and out of the way for easy adjustment. Fits EVO, TC and most aftermarket tubes.

€15.14 €19.03

-€8.16

KIBBLEWHITE Valve Guide Ball Hone — 7.0 mm, Black, Silver

Ball hone for sizing valve guide materials; durable for C630 bronze and cast iron. Made in the U.S.A.

€23.10 €31.26

-€10.35

FEULING OIL PUMP CORP. M8 Oil Pump Roll Pin Remover/Installer Tool — Red

Quick, precise tool for removing and installing the roll pin in M8 oil pumps. Made in the USA.

€40.24 €50.59

Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore set, Silver

-€46.00

FEULING OIL PUMP CORP. Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore...

Precision measuring balls for checking lifter bore diameter and roundness. Includes four sizes (0.8430"–0.8450") and fits EVO '84-'99, Twin Cam '99-'17 and M8 '17-'24. Made in the USA.

€178.90 €224.90

-€26.33

FEULING OIL PUMP CORP. M8 Crankshaft Runout Measuring Tool — Red

Quickly and accurately checks crank pinion shaft runout on M8 engines with the crankshaft installed. Includes dial indicator, tool plate, and mounting hardware.

€102.40 €128.73

Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

-€38.80

FEULING OIL PUMP CORP. Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

Machines valve spring seats for correct spring height and spring cup fitment. Hardened pilots for 3/8" and 1/2" drills. Cuts 0.550" ID x 1.180" OD. For M8 heads with high lift cams.

€150.91 €189.71

Pilot Seat Cutter for M8 — for 6 mm valves

-€18.25

FEULING OIL PUMP CORP. Pilot Seat Cutter for M8 — for 6 mm valves

Machines valve spring seats for correct spring height and cup fit. Interchangeable cutter bodies and pilots; hardened pilots fit 3/8 and hand drills. For 6 mm valves.

€70.99 €89.24

-€25.71

PRO CIRCUIT Matrix Concepts™ Bike Stand — 42 cm height, center mount, Black

Lightweight polycarbonate bike stand with anti-flex supports and a wide rubber top for stable, durable support. Manufactured by Matrix Concepts™.

€115.68 €141.39

-€9.29

FEULING OIL PUMP CORP. Oil Pump Gear Alignment Tool — 9017, Black, Silver

Aligns oil pump gear flats with crankshaft flats for improved scavenge-port sealing. Assemble components on the bench and install the complete unit for best results.

€36.18 €45.47

Camplate Roll Pin Removal/Installation Tool — Valve spring application, Black

-€60.51

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Valve spring...

Tool for easy removal and installation of pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€235.80 €296.31

-€20.25

HYPERPRO Special Tool for Spring Removal — Fork spring remover, kit

Professional hydraulic tool to compress shock springs and remove retaining rings. Includes adjustable adapter plates and adapter ring HP-T26.

€78.75 €99.00

Special Tool for Spring Removal — fork spring, HP-T02, black

-€61.16

HYPERPRO Special Tool for Spring Removal — fork spring, HP-T02, black

Hydraulic tool for compressing shock absorber springs and removing retaining rings; includes adjustable adapter plates and adapter ring HP-T26.

€237.84 €299.00

-€9.07

PEDRO'S Star Nut Setter — 1" & 1-1/8" threadless steerers, Black

Hands-free tool that quickly installs star nuts in 1" and 1-1/8" threadless steerers. Compact, durable design.

€25.64 €34.71

-€11.14

HYPERPRO Vice Clamp — Fork tube, 24 mm, black

Securely holds suspension components in a vise without damage.

Available in multiple diameters for versatile fitment.

€48.86 €60.00

-€11.14

HYPERPRO Vice Clamp — Fork Tube, Black

Cushions and secures suspension components during maintenance; available in multiple diameters.

€48.86 €60.00

-€11.14

HYPERPRO Vice Clamp — Fork tube, Black

Holds suspension components securely in a vise without damage. Available in multiple diameters to meet most requirements.

€48.86 €60.00

-€11.14

HYPERPRO Vice Clamp — 41 mm, black

Holds suspension components securely without marring; available in multiple diameters for workshop use.

€48.86 €60.00

-€11.14

HYPERPRO Vice Clamp — 43 mm, black

Securely holds suspension components in a vise without causing damage; available in multiple diameters.

€48.86 €60.00

-€11.14

HYPERPRO Vice Clamp — 49 mm, Black

Holds suspension components in a vise without damage; available in multiple diameters for broad compatibility.

€48.86 €60.00

-€11.14

HYPERPRO Vice Clamp — 50 mm fork tube, Black

Securely holds suspension components in a vise without damage; available in multiple diameters.

€48.86 €60.00

-€11.14

HYPERPRO Vice Clamp — fork tube, black

Protects suspension components in a vise; available in multiple diameters.

€48.86 €60.00

-€9.09

HYPERPRO Vice Clamp — Blue

Holds suspension components securely in a vise without damage; available in multiple diameters.

€40.91 €50.00

-€11.14

HYPERPRO Vice Clamp — Black

Holds suspension components securely in a vise without damage. Available in multiple diameters.

€48.86 €60.00

-€11.14

HYPERPRO Vice Clamp — Black

Holds suspension components securely in a vise without damage. Available in multiple diameters.

€48.86 €60.00

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS