TOOLS

-€11.41

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Red

Tool for quick removal and installation of the pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€44.40 €55.81

-€46.14

FEULING OIL PUMP CORP. Camplate Tool — PSI Relief Valve, Black, Red, Silver

Test and set cam plate relief valve pop-off psi. Includes air regulator, 0-100 psi gauge, gasket and hardware. Bench test before installation.

€179.42 €225.56

Variator Blocking Tool — Silver, Transmission

-€1.98

101 OCTANE Variator Blocking Tool — Silver, Transmission

Locking tool for quick installation and removal of the variator. Ideal for drivetrain work and piston stopping.

€7.68 €9.66

Variator Blocking Tool — Transmission holder, Silver

-€3.08

101 OCTANE Variator Blocking Tool — Transmission holder, Silver

Locking tool for quick variator installation and removal. Ideal for drivetrain and piston stopper work. Prevents piston damage.

€11.94 €15.02

Variator Blocking Tool — Transmission, Silver

-€2.06

101 OCTANE Variator Blocking Tool — Transmission, Silver

Locking tool for quick installation and removal of the variator; protects the piston stopper and simplifies drivetrain work.

€8.00 €10.06

Variator Blocking Tool — Transmission, Black

-€2.82

101 OCTANE Variator Blocking Tool — Transmission, Black

Locks the variator for installation and removal. Quick, easy operation; prevents piston damage during maintenance.

€10.94 €13.76

Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO, Red

-€26.33

FEULING OIL PUMP CORP. Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO,...

Mounts to the cam chest to measure crankshaft run out and Twin Cam gear drive backlash. Includes tool plate, +/- 0.001 dial indicator, and mounting hardware.

€102.40 €128.73

-€3.89

FEULING OIL PUMP CORP. Pushrod Tube Holder — Pushrod Tube, Black

Holds pushrod tubes up and out of the way for easy adjustment. Fits EVO, TC and most aftermarket tubes.

€15.14 €19.03

Legend Gear Saddle Strap SLS — 39 x 21 cm

-€8.60

SW-MOTECH Legend Gear Saddle Strap SLS — 39 x 21 cm

Secure strap for LS1/LS2 saddlebags; universal fit for straight bench seats; includes two double-clamping buckles.

€33.42 €42.02

-€1.72

SW-MOTECH Retention Strap Set for Tail Bags — 20 mm, 4 pack, Black

Replacement retention straps for tail bags. Includes four straps; easy to fit and adjust.

€6.68 €8.40

-€1.38

SW-MOTECH Tie-Down Strap Set for Tail Bags — 2 pack, black

Replacement tie-down straps for tail bags; includes 2 compression straps.

€5.34 €6.72

-€1.72

SW-MOTECH Tension Straps — 4-pack, Black

Replacement tension straps for Drybag 180/250/260/350/450/600/620/700. Includes 4 retention straps.

€6.68 €8.40

-€3.43

SW-MOTECH Strap Set Legend — Black

Set of four loop straps (80 cm) and two mounting straps (100 cm) for Legend Gear bags; polyamide straps with anodized aluminum buckles; compatible with all Legend Gear bags.

€13.38 €16.81

-€3.43

SW-MOTECH Strap Set Legend — SW-MOTECH, Cargo, Black

Legend Gear strap set — 4 loop straps (80 cm), 2 mounting straps (100 cm); polyamide straps with anodized aluminum buckles; compatible with all Legend Gear bags.

€13.38 €16.81

Strap Set Legend — 4 loop straps (80 cm), 2 mounting straps (100 cm), Black

-€1.38

SW-MOTECH Strap Set Legend — 4 loop straps (80 cm), 2 mounting straps...

Four 80 cm loop straps and two 100 cm mounting straps for securing Legend Gear bags. Polyamide webbing with anodized aluminum buckles.

€5.34 €6.72

-€3.43

SW-MOTECH ROK Straps — 2-pack, black

Elastic ROK straps with metal buckle and quick-release fastener for secure luggage lashing.

€13.38 €16.81

-€4.29

SW-MOTECH ROK Straps — 2-pack, Black

Durable elastic straps with metal buckle and smooth-edged hardware for secure luggage lashing.

€16.72 €21.01

Legend Gear Shoulder Strap — 90–150 cm, Black

-€5.15

SW-MOTECH Legend Gear Shoulder Strap — 90–150 cm, Black

Padded LA4 shoulder strap converts accessory bags into a practical shoulder bag; adjustable 90–150 cm, with secure fastening straps and anodized aluminium hooks.

€20.06 €25.21

-€10.35

FEULING OIL PUMP CORP. M8 Oil Pump Roll Pin Remover/Installer Tool — Red

Quick, precise tool for removing and installing the roll pin in M8 oil pumps. Made in the USA.

€40.24 €50.59

Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore set, Silver

-€46.00

FEULING OIL PUMP CORP. Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore...

Precision measuring balls for checking lifter bore diameter and roundness. Includes four sizes (0.8430"–0.8450") and fits EVO '84-'99, Twin Cam '99-'17 and M8 '17-'24. Made in the USA.

€178.90 €224.90

-€26.33

FEULING OIL PUMP CORP. M8 Crankshaft Runout Measuring Tool — Red

Quickly and accurately checks crank pinion shaft runout on M8 engines with the crankshaft installed. Includes dial indicator, tool plate, and mounting hardware.

€102.40 €128.73

-€7.79

101 OCTANE Spring Tool — 125–155 mm outer diameter

Counterpressure spring mounting tool for convertor units (125–155 mm outer diameter). Compact and easy to use.

€30.30 €38.09

-€2.77

101 OCTANE Clutch Tool — Black

Specialist tool to lock the clutch bell for assembly or disassembly; enables quick, professional work.

€10.76 €13.53

Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

-€38.80

FEULING OIL PUMP CORP. Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

Machines valve spring seats for correct spring height and spring cup fitment. Hardened pilots for 3/8" and 1/2" drills. Cuts 0.550" ID x 1.180" OD. For M8 heads with high lift cams.

€150.91 €189.71

Pilot Seat Cutter for M8 — for 6 mm valves

-€18.25

FEULING OIL PUMP CORP. Pilot Seat Cutter for M8 — for 6 mm valves

Machines valve spring seats for correct spring height and cup fit. Interchangeable cutter bodies and pilots; hardened pilots fit 3/8 and hand drills. For 6 mm valves.

€70.99 €89.24

-€19.27

101 OCTANE Crankcase Separator — 8 mm, Black

Universal crankcase separating tool. 140 mm leg length; maximum leg distance 240 mm. For use with up to M8 threads.

€74.99 €94.26

Fuel Transfer System for Delphi Fuel Injection — Black, Fits '01–'25 Harley-Davidson (except V‑Rod)

-€38.60

FUEL-TOOL Fuel Transfer System for Delphi Fuel Injection — Black, Fits...

Transfers up to one quart every 20 seconds; tool-free connection. Includes storage pouch. Fits '01–'25 Harley-Davidson models (except V‑Rod). Made in the USA.

€109.08 €147.68

-€53.44

FUEL-TOOL Fuel Pressure Check Gauge — Delphi fuel injection, Black

Compact gauge for quick, accurate fuel pressure checks on '01-'25 Harley Davidson Delphi fuel-injected models.

€151.05 €204.49

-€9.29

FEULING OIL PUMP CORP. Oil Pump Gear Alignment Tool — 9017, Black, Silver

Aligns oil pump gear flats with crankshaft flats for improved scavenge-port sealing. Assemble components on the bench and install the complete unit for best results.

€36.18 €45.47

Camplate Roll Pin Removal/Installation Tool — Valve spring application, Black

-€60.51

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Valve spring...

Tool for easy removal and installation of pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€235.80 €296.31

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS