TOOLS

-€11.41

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Red

Tool for quick removal and installation of the pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€44.40 €55.81

-€46.14

FEULING OIL PUMP CORP. Camplate Tool — PSI Relief Valve, Black, Red, Silver

Test and set cam plate relief valve pop-off psi. Includes air regulator, 0-100 psi gauge, gasket and hardware. Bench test before installation.

€179.42 €225.56

Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO, Red

-€26.33

FEULING OIL PUMP CORP. Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO,...

Mounts to the cam chest to measure crankshaft run out and Twin Cam gear drive backlash. Includes tool plate, +/- 0.001 dial indicator, and mounting hardware.

€102.40 €128.73

-€3.89

FEULING OIL PUMP CORP. Pushrod Tube Holder — Pushrod Tube, Black

Holds pushrod tubes up and out of the way for easy adjustment. Fits EVO, TC and most aftermarket tubes.

€15.14 €19.03

-€10.35

FEULING OIL PUMP CORP. M8 Oil Pump Roll Pin Remover/Installer Tool — Red

Quick, precise tool for removing and installing the roll pin in M8 oil pumps. Made in the USA.

€40.24 €50.59

Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore set, Silver

-€46.00

FEULING OIL PUMP CORP. Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore...

Precision measuring balls for checking lifter bore diameter and roundness. Includes four sizes (0.8430"–0.8450") and fits EVO '84-'99, Twin Cam '99-'17 and M8 '17-'24. Made in the USA.

€178.90 €224.90

-€26.33

FEULING OIL PUMP CORP. M8 Crankshaft Runout Measuring Tool — Red

Quickly and accurately checks crank pinion shaft runout on M8 engines with the crankshaft installed. Includes dial indicator, tool plate, and mounting hardware.

€102.40 €128.73

T-Handle Speed Ring Set — 12.7 mm (1/2"), 80 mm (3-1/8"), Black

-€4.43

BIKESERVICE T-Handle Speed Ring Set — 12.7 mm (1/2"), 80 mm (3-1/8"), Black

Reduces friction and speeds T-handle rotation for smoother fastener removal and positioning.

€12.52 €16.95

Extra Long Magnetic Torx Key Set — T10,T15,T20,T25,T27,T30,T40,T45,T50, Chrome

-€8.75

BIKESERVICE Extra Long Magnetic Torx Key Set —...

Extra-long Torx key set with built-in magnet. Sizes: T10, T15, T20, T25, T27, T30, T40, T45, T50. Extended reach and tamper-proof base ends.

€24.72 €33.47

-€7.80

BIKESERVICE Extra Long Magnetic Hex Key Set — 1.5–10 mm, Chrome

Nine-piece extra-long hex key set with ball-end access up to 25° and extended reach for hard-to-reach fasteners. Sizes 1.5–10 mm.

€22.05 €29.85

Stubby Flex Head Ratchet Combination Wrench Set — Metric, Set of 8, Silver

-€37.37

BIKESERVICE Stubby Flex Head Ratchet Combination Wrench Set — Metric, Set...

Precision 72-tooth ratcheting gears need only a 5° swing arc to operate in tight spaces. Flex head access improves engagement and reduces fastener rounding.

€105.63 €143.00

Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

-€38.80

FEULING OIL PUMP CORP. Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

Machines valve spring seats for correct spring height and spring cup fitment. Hardened pilots for 3/8" and 1/2" drills. Cuts 0.550" ID x 1.180" OD. For M8 heads with high lift cams.

€150.91 €189.71

Pilot Seat Cutter for M8 — for 6 mm valves

-€18.25

FEULING OIL PUMP CORP. Pilot Seat Cutter for M8 — for 6 mm valves

Machines valve spring seats for correct spring height and cup fit. Interchangeable cutter bodies and pilots; hardened pilots fit 3/8 and hand drills. For 6 mm valves.

€70.99 €89.24

Crankcase Separator — 2-stroke, 4-stroke

-€46.98

BIKESERVICE Crankcase Separator — 2-stroke, 4-stroke

Rebuild tool for separating vertically split single-cylinder crankcases. Includes M8-M6 double-ended screw, center pulling screw, quick-adjust nut and three-leg puller frame.

€132.76 €179.74

Stud Remover & Installer — Engine, Black

-€2.74

BIKESERVICE Stud Remover & Installer — Engine, Black

Removes and installs studs without damaging threads. Suitable for common stud thread sizes.

€7.75 €10.49

-€2.74

BIKESERVICE Stud Remover & Installer — Engine, Black

Removes and installs studs without damaging threads. Fits most common stud thread sizes for workshop use.

€7.75 €10.49

-€2.74

BIKESERVICE Stud Remover & Installer — Metric, Black

Removes and installs studs cleanly without thread damage; fits most common thread sizes.

€7.75 €10.49

-€2.74

BIKESERVICE Stud Remover & Installer — Engine, Black

Removes and installs studs without damaging threads; fits most common stud thread sizes.

€7.75 €10.49

-€7.67

BIKESERVICE Double-Ear Hose Clamp Pliers — 220 mm

Tool for reliable crimping of one- and two-ear hose clamps with top and side jaws for versatile use.

€21.66 €29.33

Piston Ring Compressor Set — 35 mm–111 mm (1-3/8"–4-3/8")

-€39.48

BIKESERVICE Piston Ring Compressor Set — 35 mm–111 mm (1-3/8"–4-3/8")

Ratcheting compressor and expander pliers for easy piston and ring installation. Fits 1-3/8"–4-3/8" pistons.

€111.53 €151.01

Piston Ring Expanding Pliers — For engine pistons

-€5.24

BIKESERVICE Piston Ring Expanding Pliers — For engine pistons

Ratcheting pliers with tapered jaws for controlled expansion and easy piston ring installation.

€14.83 €20.07

Cam Chain Breaker & Riveting Tool Kit — fits 2x3, 3x4, 4x5 cam chains, Black

-€13.81

BIKESERVICE Cam Chain Breaker & Riveting Tool Kit — fits 2x3, 3x4, 4x5 cam...

Compact kit for breaking and riveting cam chain master links; includes body, handle, push pins and instruction manual. Fits most 2x3, 3x4, 4x5 cam chains.

€39.02 €52.83

-€18.41

BIKESERVICE Flywheel Puller Kit — Clutch, Engine

Versatile kit for extracting flywheels, clutch bodies and primary gear assemblies; includes multiple yokes, a 125 mm forcing screw and assorted bolts; working range 30–100 mm.