TOOLS

-€2.37

DRAG SPECIALTIES Oil Filter Wrench — 14-flute, Black

Compact oil filter wrench with cutout profile for crank sensor clearance; fits most common filters.

€6.72 €9.09

-€11.41

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Red

Tool for quick removal and installation of the pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€44.40 €55.81

-€46.14

FEULING OIL PUMP CORP. Camplate Tool — PSI Relief Valve, Black, Red, Silver

Test and set cam plate relief valve pop-off psi. Includes air regulator, 0-100 psi gauge, gasket and hardware. Bench test before installation.

€179.42 €225.56

Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO, Red

-€26.33

FEULING OIL PUMP CORP. Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO,...

Mounts to the cam chest to measure crankshaft run out and Twin Cam gear drive backlash. Includes tool plate, +/- 0.001 dial indicator, and mounting hardware.

€102.40 €128.73

-€19.74

DRAG SPECIALTIES 1-1/2" Ratchet Tie-Downs — 72" length, 6,000 lb tensile, Black

Durable 1-1/2" ratchet tie-downs with vinyl-coated safety hooks, double security stitching, and dependable nylon webbing.

€55.77 €75.51

-€3.89

FEULING OIL PUMP CORP. Pushrod Tube Holder — Pushrod Tube, Black

Holds pushrod tubes up and out of the way for easy adjustment. Fits EVO, TC and most aftermarket tubes.

€15.14 €19.03

Soft-Tie 18" Extensions — 18", 6000 lb capacity, 1-1/2" width

-€4.47

DRAG SPECIALTIES Soft-Tie 18" Extensions — 18", 6000 lb capacity, 1-1/2" width

Soft-Tie extensions protect paint and chrome while securing bars and other thick anchor points; made in the United States.

€12.61 €17.08

-€10.35

FEULING OIL PUMP CORP. M8 Oil Pump Roll Pin Remover/Installer Tool — Red

Quick, precise tool for removing and installing the roll pin in M8 oil pumps. Made in the USA.

€40.24 €50.59

Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore set, Silver

-€46.00

FEULING OIL PUMP CORP. Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore...

Precision measuring balls for checking lifter bore diameter and roundness. Includes four sizes (0.8430"–0.8450") and fits EVO '84-'99, Twin Cam '99-'17 and M8 '17-'24. Made in the USA.

€178.90 €224.90

-€26.33

FEULING OIL PUMP CORP. M8 Crankshaft Runout Measuring Tool — Red

Quickly and accurately checks crank pinion shaft runout on M8 engines with the crankshaft installed. Includes dial indicator, tool plate, and mounting hardware.

€102.40 €128.73

-€2.43

DRAG SPECIALTIES Oil Filter Wrench — Black, Steel, Metric

Fits 74 mm ID, 15-flute stepped S&S oil filters; 3/8" square drive; also fits filter part #0712-0648.

€6.89 €9.32

Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

-€38.80

FEULING OIL PUMP CORP. Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

Machines valve spring seats for correct spring height and spring cup fitment. Hardened pilots for 3/8" and 1/2" drills. Cuts 0.550" ID x 1.180" OD. For M8 heads with high lift cams.

€150.91 €189.71

Pilot Seat Cutter for M8 — for 6 mm valves

-€18.25

FEULING OIL PUMP CORP. Pilot Seat Cutter for M8 — for 6 mm valves

Machines valve spring seats for correct spring height and cup fit. Interchangeable cutter bodies and pilots; hardened pilots fit 3/8 and hand drills. For 6 mm valves.

€70.99 €89.24

Fuel Transfer System for Delphi Fuel Injection — Black, Fits '01–'25 Harley-Davidson (except V‑Rod)

-€38.60

FUEL-TOOL Fuel Transfer System for Delphi Fuel Injection — Black, Fits...

Transfers up to one quart every 20 seconds; tool-free connection. Includes storage pouch. Fits '01–'25 Harley-Davidson models (except V‑Rod). Made in the USA.

€109.08 €147.68

-€53.44

FUEL-TOOL Fuel Pressure Check Gauge — Delphi fuel injection, Black

Compact gauge for quick, accurate fuel pressure checks on '01-'25 Harley Davidson Delphi fuel-injected models.

€151.05 €204.49

-€32.10

DRAG SPECIALTIES Oil Extractor — 4 L (1.05 US gal.), Black, Clear

Sturdy and portable oil extractor for easy fluid removal.

€90.73 €122.83

-€9.29

FEULING OIL PUMP CORP. Oil Pump Gear Alignment Tool — 9017, Black, Silver

Aligns oil pump gear flats with crankshaft flats for improved scavenge-port sealing. Assemble components on the bench and install the complete unit for best results.

€36.18 €45.47

Camplate Roll Pin Removal/Installation Tool — Valve spring application, Black

-€60.51

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Valve spring...

Tool for easy removal and installation of pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€235.80 €296.31

Replacement Hooks — Fuel check valve, 4-pack, MC450, Silver

-€6.00

FUEL-TOOL Replacement Hooks — Fuel check valve, 4-pack, MC450, Silver

Replacement hooks for check valve rebuild kit; includes two lower O-ring hooks and two upper O-ring hooks; made in the USA.

€16.98 €22.98

Hi-Pressure Shock Pump — 23 cm, rear shock, 0–30 psi, black/silver

-€11.72

DRAG SPECIALTIES Hi-Pressure Shock Pump — 23 cm, rear shock, 0–30 psi,...

Twist-and-lock removable gauge for compact storage. Fits rear shocks and front forks. Rotary flexible hose, die-cast gauge base and ergonomic handle. Precise adjust button for fine control.

€33.10 €44.82

Hi-Pressure Shock Pump — Rear shock, 0–60 psi, 23 cm (9")

-€12.06

DRAG SPECIALTIES Hi-Pressure Shock Pump — Rear shock, 0–60 psi, 23 cm (9")

Twist-and-lock removable gauge, rotary flexible hose, die-cast gauge base and ergonomic handle. Precise adjust button (2–3 psi per push). Fits in small storage areas.

€34.09 €46.15

-€1.97

DRAG SPECIALTIES Clear Timing Hole Plug — 19 mm (3/4"), timing mark, clear

Locates the timing mark without getting an eye full of oil.

€5.57 €7.54

-€46.76

DRAG SPECIALTIES Center Jack — 453 kg (1000 lb), 37 cm (14-1/2"), Black/Gray

Sturdy manual scissor jack with a non-slip rubber top pad and large footprint for stable motorcycle lifting. Not for use with air or electric impact guns.

€132.15 €178.91

-€44.19

DRAG SPECIALTIES Center Jack — 1,000 lb (453 kg), 14-1/2" max height

Sturdy scissor center jack with a durable rubber top pad and wide base for stable motorcycle lifting. Do not use air or electric impact guns.

€124.89 €169.08

-€11.31

SCAR Fork Cap Wrench — 49 mm drive, Black

Tool for disassembling Kayaba, Showa and WP forks. Secure engagement for service and maintenance.

€31.94 €43.25

-€8.25

SCAR Fork Cap Wrench — 50 mm fork tube, Black

Precision tool for safely removing fork caps on Kayaba, Showa and WP forks.

€23.33 €31.58

-€8.25

SCAR Fork Cap Wrench — 50 mm drive (1-31/32"), 50 mm fork tube

Removes and installs fork caps for compatible suspension forks. Suitable for workshop maintenance and service. Sold each.

€23.33 €31.58

-€23.40

SCAR Adjustable Lift Stand — 200 kg, 35 cm, Black

Hydraulic adjustable lift stand with height range 33–43 cm, safety hold hook, max 150 kg, black powder coat.

€66.23 €89.63

Digital Fork Air Pump — Fork, Black, fits 7/8" and 1-1/8" handlebars

-€19.58

SCAR Digital Fork Air Pump — Fork, Black, fits 7/8" and 1-1/8"...

High-pressure pump for air forks with a large LCD, anti air-loss valve, auto on/off, and a pivoting hose for 7/8" and 1-1/8" handlebars.

€55.34 €74.92

-€49.32

TECHNORESEARCH O2 Instal Block — Aluminum

O2 wideband sensor sampling block with vent screw for reliable service access.

€191.83 €241.15

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS