TOOLS

-€6.75

PEDRO'S Multitool — PEDRO'S, Black, Steel

Compact 12-function folding multitool, 163 grams. Ergonomic composite handle. Includes 2.5, 3, 4, 5, 6 and 8 mm hex keys, flat blade driver, M7 spoke wrench and removable 1–11 speed chain tool with integrated 3.2, 3.3 and 3.5 mm spoke wrenches.

€19.06 €25.81

-€11.41

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Red

Tool for quick removal and installation of the pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€44.40 €55.81

-€46.14

FEULING OIL PUMP CORP. Camplate Tool — PSI Relief Valve, Black, Red, Silver

Test and set cam plate relief valve pop-off psi. Includes air regulator, 0-100 psi gauge, gasket and hardware. Bench test before installation.

€179.42 €225.56

Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO, Red

-€26.33

FEULING OIL PUMP CORP. Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO,...

Mounts to the cam chest to measure crankshaft run out and Twin Cam gear drive backlash. Includes tool plate, +/- 0.001 dial indicator, and mounting hardware.

€102.40 €128.73

-€3.84

PEDRO'S Bicycle Chain Keeper — Black

Holds the chain off the frame when the rear wheel is removed so the drivetrain can turn freely for cleaning, storage, or transport. Quick-release lever for fast installation and removal.

€8.64 €12.48

-€3.89

FEULING OIL PUMP CORP. Pushrod Tube Holder — Pushrod Tube, Black

Holds pushrod tubes up and out of the way for easy adjustment. Fits EVO, TC and most aftermarket tubes.

€15.14 €19.03

-€10.35

FEULING OIL PUMP CORP. M8 Oil Pump Roll Pin Remover/Installer Tool — Red

Quick, precise tool for removing and installing the roll pin in M8 oil pumps. Made in the USA.

€40.24 €50.59

Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore set, Silver

-€46.00

FEULING OIL PUMP CORP. Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore...

Precision measuring balls for checking lifter bore diameter and roundness. Includes four sizes (0.8430"–0.8450") and fits EVO '84-'99, Twin Cam '99-'17 and M8 '17-'24. Made in the USA.

€178.90 €224.90

-€26.33

FEULING OIL PUMP CORP. M8 Crankshaft Runout Measuring Tool — Red

Quickly and accurately checks crank pinion shaft runout on M8 engines with the crankshaft installed. Includes dial indicator, tool plate, and mounting hardware.

€102.40 €128.73

Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

-€38.80

FEULING OIL PUMP CORP. Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

Machines valve spring seats for correct spring height and spring cup fitment. Hardened pilots for 3/8" and 1/2" drills. Cuts 0.550" ID x 1.180" OD. For M8 heads with high lift cams.

€150.91 €189.71

Pilot Seat Cutter for M8 — for 6 mm valves

-€18.25

FEULING OIL PUMP CORP. Pilot Seat Cutter for M8 — for 6 mm valves

Machines valve spring seats for correct spring height and cup fit. Interchangeable cutter bodies and pilots; hardened pilots fit 3/8 and hand drills. For 6 mm valves.

€70.99 €89.24

-€9.29

FEULING OIL PUMP CORP. Oil Pump Gear Alignment Tool — 9017, Black, Silver

Aligns oil pump gear flats with crankshaft flats for improved scavenge-port sealing. Assemble components on the bench and install the complete unit for best results.

€36.18 €45.47

Camplate Roll Pin Removal/Installation Tool — Valve spring application, Black

-€60.51

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Valve spring...

Tool for easy removal and installation of pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€235.80 €296.31

-€9.07

PEDRO'S Star Nut Setter — 1" & 1-1/8" threadless steerers, Black

Hands-free tool that quickly installs star nuts in 1" and 1-1/8" threadless steerers. Compact, durable design.

€25.64 €34.71

Piston Cooling Jet Pressure Tester Block Kit - Stand Alone Tool — Black, Red kit, fits Twin Cam and M8

-€43.78

FEULING PARTS Piston Cooling Jet Pressure Tester Block Kit - Stand Alone...

Complete set with tool plate, gauge, regulator and hardware. Tests all Twin Cam and M8 piston cooling jets. Stand-alone version for shops lacking the companion reference part.

€123.77 €167.55

Pressure Test Tool — Piston cooling, Twin Cam A/B, M8

-€41.73

FEULING PARTS Pressure Test Tool — Piston cooling, Twin Cam A/B, M8

Complete kit with tool plate, gauge, regulator and hardware. Tests piston cooling jets to diagnose or prevent issues before engine build completion. Stand-alone option for users without a compatible part number.

€162.33 €204.06

-€36.08

FEULING PARTS VVT Cam Torque Reaction Tool — VVT

Allows removal and installation of VVT cam bolts by securing the cam during torquing.

€101.97 €138.05

Piston Cooling Jet Pressure Tester Block — Red

-€25.25

FEULING PARTS Piston Cooling Jet Pressure Tester Block — Red

Tester block to check piston cooling jet pressure for Twin Cam and M8. Includes tool plate and fasteners; fits Feuling tool part# 9010 (sold separately).

€71.40 €96.65

Replacement Parts For Rk Chain Breaker/Press Fit Tool — fits clip and rivet master links, black

-€2.47

RK Replacement Parts For Rk Chain Breaker/Press Fit Tool — fits...

Replacement parts for chain breaker and press-fit tool with a small pressure bolt.

€7.57 €10.04

Replacement Parts For Rk Chain Breaker/Press Fit Tool — Clip, Rivet, Black

-€2.47

RK Replacement Parts For Rk Chain Breaker/Press Fit Tool — Clip,...

Small pressure bolt for precise pressing action.

Compact replacement parts for quick maintenance and repair.

€7.57 €10.04

-€4.54

RK Small Pressure Bolt — for clip and rivet, black

Replacement pressure component for chain breaker and press-fit tools that supplies controlled, consistent pressure for master link work.

€13.86 €18.40

Replacement Parts For Rk Chain Breaker/Press Fit Tool — clip and rivet, black

-€2.47

RK Replacement Parts For Rk Chain Breaker/Press Fit Tool — clip...

Durable replacement part featuring a small pressure bolt for precise pin cutting and pressing.

€7.57 €10.04

Replacement Parts for RK Chain Breaker/Press Fit Tool — Cutting pin, clip/rivet fitment

-€2.47

RK Replacement Parts for RK Chain Breaker/Press Fit Tool —...

Replacement part for chain breaker and press-fit tools. Small pressure bolt for controlled force.

€7.57 €10.04

Chain Tool Kit — Black, Red, UCT2100(50)

-€23.66

RK Chain Tool Kit — Black, Red, UCT2100(50)

Complete chain tool kit for pressing, riveting, flaring, cutting and breaking 40 & 50 type chains. Includes pins, holder plates and pressure bolts. Not compatible with 530PRODR; 420/428 rivet requires additional parts.

€72.20 €95.86

Replacement Parts For Rk Chain Breaker/Press Fit Tool — Black, clip, rivet

-€4.54

RK Replacement Parts For Rk Chain Breaker/Press Fit Tool — Black,...

Replacement small pressure bolt for RK chain breaker/press-fit tools.

€13.86 €18.40

Replacement Parts For Rk Chain Breaker/Press Fit Tool — 520, 525, 530, 500, 532, Black

-€4.54

RK Replacement Parts For Rk Chain Breaker/Press Fit Tool — 520,...

Small pressure bolt for precise, consistent pressure; ideal for maintenance and repairs.

€13.86 €18.40

Replacement Parts for RK Chain Breaker/Press Fit Tool — Chain sizes 400, 420, 428, Black

-€4.54

RK Replacement Parts for RK Chain Breaker/Press Fit Tool — Chain...

Replacement component for chain breaker and press-fit tools; includes a small pressure bolt for reliable alignment.

€13.86 €18.40

Replacement Parts For Rk Chain Breaker/Press Fit Tool — 420, 428, 400 chain sizes, black

-€2.47

RK Replacement Parts For Rk Chain Breaker/Press Fit Tool — 420,...

Replacement components for chain breaker and press-fit tools. Easy to install and suitable for regular maintenance.

€7.57 €10.04

-€7.88

NAMZ Delphi-Packard Weatherpack Terminal Removal Tool — Green

Universal tool for removing Delphi-Packard Weatherpack terminals; compatible with AMP Multilock and Delphi connectors. Removes pins and receptacles. Made in the USA.

€23.65 €31.53

-€20.11

NAMZ MX-150 Molex Terminal Removal Tool — Black

Precision tool for removing MX-150 Molex terminals. Designed exclusively for MX-150 connectors to minimize pin and housing damage.

€60.33 €80.44

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS