TOOLS

-€3.19

SHOW CHROME Oil Filter Wrench — Thin, Silver

Removes the oil filter without removing fairing pieces; secure locking mechanism requires no adjustment; fits most 2-1/2" filters.

€13.30 €16.49

-€2.36

SHOW CHROME Tiedown Loop — 18" (45.5 cm), pair, red

18" looped nylon extension straps keep metal tie-down ends away from your bike. Sold in a two pack.

€3.00 €5.36

-€41.60

KNIPEX Crimp Pliers — Blue, Red

Precision crimp pliers with factory-calibrated pressure, parallel die movement, and an integral self-releasing lock.

€101.65 €143.25

-€42.94

KNIPEX Crimp Pliers — Black, Metric

Plastic-cased crimp pliers with calibrated parallel crimping and a self-releasing mechanism for consistent results.

€104.92 €147.86

-€3.57

SHOW CHROME Filter Wrench — 64 mm (2-1/2"), oil filter, silver

12-sided addition for fast access to 17 mm and 12 mm drain plugs.

Includes drain plug wrench. Made in USA.

€13.84 €17.41

Fuel Transfer System for Delphi Fuel Injection — Black, Fits '01–'25 Harley-Davidson (except V‑Rod)

-€38.60

FUEL-TOOL Fuel Transfer System for Delphi Fuel Injection — Black, Fits...

Transfers up to one quart every 20 seconds; tool-free connection. Includes storage pouch. Fits '01–'25 Harley-Davidson models (except V‑Rod). Made in the USA.

€109.08 €147.68

-€5.67

CUSTOM DYNAMICS LED Road Flare Safety Light — Emergency, Clear, Red

Compact LED road flare with a 360° beacon, three emergency modes, built-in hook and rear magnet. Requires 3 AAA batteries (sold separately).

€22.01 €27.68

Polaris Roll Pin Punch Tool — fits '90–current Polaris ATVs/UTVs (7661913), Black

-€9.89

QUAD LOGIC Polaris Roll Pin Punch Tool — fits '90–current Polaris...

Removes Polaris driveline roll pins (7661913); use with air or standard hammer. Replace the roll pin each time.

€27.97 €37.86

-€7.88

NAMZ Delphi-Packard Weatherpack Terminal Removal Tool — Green

Universal tool for removing Delphi-Packard Weatherpack terminals; compatible with AMP Multilock and Delphi connectors. Removes pins and receptacles. Made in the USA.

€23.65 €31.53

-€20.11

NAMZ MX-150 Molex Terminal Removal Tool — Black

Precision tool for removing MX-150 Molex terminals. Designed exclusively for MX-150 connectors to minimize pin and housing damage.

€60.33 €80.44

-€19.34

NAMZ Mate-n-Lock Terminal Removal Tool - Female Terminals — Black

Tool for removing female terminals from AMP Mate-n-Lock connectors for quick connector service.

€58.05 €77.39

-€11.20

NAMZ Removal Tool — For male terminals only, Black

Plunger tool removes male terminals from Mate-n-Lock connectors — slide over the terminal and push the lever.

€33.59 €44.79

Universal Mini "U" Barrel Crimp Tool — Mini, "U" Barrel, Black, Red

-€25.20

NAMZ Universal Mini "U" Barrel Crimp Tool — Mini, "U" Barrel,...

Precision crimper for small 30–20 gauge terminals; ideal for late-model motorcycle wiring. Made in Japan.

€75.63 €100.83

-€13.48

NAMZ Universal "U" Barrel Terminal Crimp Tool — Black, Red

Crimps 20–14 gauge wire for AMP, Deutsch, Delphi and other stamped terminals; five-position crimper; made in the USA.

€40.47 €53.95

-€3.42

CUSTOM DYNAMICS Test Light — Black

Compact tester for 12–24 V DC circuits. Checks for shorts, open circuits and measures voltage for fast troubleshooting.

€10.91 €14.33

Handlebar Mount Tire Pressure Monitor System — fits 7/8", 1", 1-1/8" handlebars, gray

-€50.68

SHOW CHROME Handlebar Mount Tire Pressure Monitor System — fits 7/8", 1",...

Handlebar-mounted TPMS kit with universal valve-stem sensors, patented anti-theft rings, 20-minute battery-saver mode and G-force wake; mounts to round or face-mounted brake clamps.

€159.92 €210.60

Lighting Product Test Case — Compact kit, Black

-€39.02

CUSTOM DYNAMICS Lighting Product Test Case — Compact kit, Black

Complete test kit for troubleshooting and warranty verification of LED lighting products; plug-and-play connectors and included power adapter.

€151.77 €190.79

-€53.44

FUEL-TOOL Fuel Pressure Check Gauge — Delphi fuel injection, Black

Compact gauge for quick, accurate fuel pressure checks on '01-'25 Harley Davidson Delphi fuel-injected models.

€151.05 €204.49

-€8.89
Out of Stock

QUAD LOGIC Polaris Carburetor Choke Nut Tool — Silver, Carburetor

Choke nut wrench for removing and installing choke cable fittings on Mikuni 34–40 mm carburetors. Ideal for quick Polaris carburetor repairs.

€25.11 €34.00

-€11.55

QUAD LOGIC Fuel Pump Nut Wrench for Polaris — Silver

Helps remove stuck fuel pump retainer nuts on Polaris models; reduces time and avoids damage.

€32.64 €44.19

Replacement Hooks — Fuel check valve, 4-pack, MC450, Silver

-€6.00

FUEL-TOOL Replacement Hooks — Fuel check valve, 4-pack, MC450, Silver

Replacement hooks for check valve rebuild kit; includes two lower O-ring hooks and two upper O-ring hooks; made in the USA.

€16.98 €22.98

Fuel Pressure Gauge — Fits '01-'25 Harley-Davidson (except V-Rod) with Delphi fuel injection, Black

-€67.58

FUEL-TOOL Fuel Pressure Gauge — Fits '01-'25 Harley-Davidson (except...

Magnetic fuel pressure gauge to check static and load readings. Includes storage pouch and O-ring lube. Head rotates 360°. Fits '01-'25 Harley-Davidson models (except V-Rod) with Delphi fuel injection.

€190.99 €258.57

Ball Joint Removal Tool for Strut Front Suspension — '90–'21 ATV/UTV fit, zinc

-€18.40

QUAD LOGIC Ball Joint Removal Tool for Strut Front Suspension — '90–'21...

Two-piece steel tool for removing and installing ball joints on strut-style front suspension. Works with standard shop presses; fits '90–'21 ATV/UTV models.

€52.01 €70.41

-€18.40
Out of Stock

QUAD LOGIC Ball Joint Removal Tool for A-Arm Front Suspension — Zinc

Two-piece steel tool for removing and installing ball joints with a standard shop press; heavy-duty construction; fits 2008-2020 A-arm front suspension ATVs/UTVs (except RZR/General 1000).

€52.01 €70.41

Ball Joint Removal Tool for A-Arm Front Suspension — A-Arm front suspension, zinc

-€18.40

QUAD LOGIC Ball Joint Removal Tool for A-Arm Front Suspension — A-Arm...

Two-piece steel tool for removing and installing ball joints with a standard shop press; heavy-duty for home or professional shops. Fits '15–'22 ATV/UTV A-Arm front suspensions.

€52.01 €70.41

-€5.45

NAMZ Universal Mini Pick Tool — Mini

Removes JAE, JST and other small terminals quickly and reliably.

€16.34 €21.79

-€8.33

QUAD LOGIC Plastic Rivet Pliers — Black, QUAD LOGIC

Removes plastic rivets cleanly without damaging the head.

Designed for quick, repeatable removal; fits RZR plastic rivets.

€23.53 €31.86

-€8.34

CUSTOM DYNAMICS Digital Circuit Tester — 2.6–32V DC

Heavy-duty digital circuit tester with red/green backlit polarity display, 2.6–32 V DC operating range, stainless probe and 12” coiled cord.

€32.47 €40.81

-€20.36

QUAD LOGIC Wheel Bearing Tool — Brass, front and rear wheel bearings

Torpedo installation and removal set for fast, correct bearing removal and installation on front or rear wheels.

€57.57 €77.93

-€20.24
Out of Stock

QUAD LOGIC Wheel Bearing Tool — rear wheel bearing

Torpedo-style installer/remover set for front and rear wheel bearings. Includes hub holder and driver to press bearings out and press new ones in.

€57.20 €77.44

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS