TOOLS

Scorpion Clutch Hub Puller — Orange, Anodized

-€18.74

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€72.90 €91.64

-€26.50

BARNETT Clutch Spring Compression Tool for Victory — Black anodized

Compresses diaphragm clutch springs for easy removal and re-installation of the retainer ring. Made in the USA.

€103.03 €129.53

-€49.32

TECHNORESEARCH O2 Instal Block — Aluminum

O2 wideband sensor sampling block with vent screw for reliable service access.

€191.83 €241.15

-€1.85

TECHNORESEARCH O2 Instal Block — TR200055

Compact sampling block for wideband O2 sensors with vent screw for pressure equalization.

€7.19 €9.04

Polaris Roll Pin Punch Tool — fits '90–current Polaris ATVs/UTVs (7661913), Black

-€9.89

QUAD LOGIC Polaris Roll Pin Punch Tool — fits '90–current Polaris...

Removes Polaris driveline roll pins (7661913); use with air or standard hammer. Replace the roll pin each time.

€27.97 €37.86

Flexible Fast Flow Spout for Tuff Jug Container — fits 5.3 US gal Tuff Jug

-€2.81

TUFF JUG Flexible Fast Flow Spout for Tuff Jug Container — fits 5.3 US...

Internally vented spout that provides fast flow with auto shut-off. Fits 5.3 US gal Tuff Jug containers.

€7.91 €10.72

Replacement Ripper Cap for 2.7 US Gal Tuff Jug Container — 2.7 US gal fit, Red

-€7.92

TUFF JUG Replacement Ripper Cap for 2.7 US Gal Tuff Jug Container — 2.7...

Replacement ripper cap for fast, low-spill fluid transfer with 2.7 US gal containers.

€22.40 €30.32

-€7.92

TUFF JUG Replacement Ripper Cap for 5 US gal Tuff Jug Container — Red

Replacement ripper cap for fast, low-spill transfer with 5 US gal containers.

€22.40 €30.32

Replacement Ripper Cap for 2.7 US Gal Tuff Jug Container — 2.7 US gal, Orange

-€7.92

TUFF JUG Replacement Ripper Cap for 2.7 US Gal Tuff Jug Container — 2.7...

Fast-flowing replacement cap for quick, spill-resistant fluid transfer. Easy to install and remove.

€22.40 €30.32

Replacement Ripper Cap for 5 US Gal Tuff Jug Container — 5 US gal, orange

-€7.92

TUFF JUG Replacement Ripper Cap for 5 US Gal Tuff Jug Container — 5 US...

Fast-flowing replacement cap for compatible utility jugs; twist-on installation reduces spills and provides a secure seal.

€22.40 €30.32

-€7.92

TUFF JUG Replacement Ripper Cap for 2.7 US Gal Tuff Jug Container — Blue

Fast-flowing replacement cap for 2.7 US gal containers.

€22.40 €30.32

-€7.92

TUFF JUG Replacement Ripper Cap for 5 US Gal Tuff Jug Container — Blue

Fast-flowing cap for five-gallon utility jugs; steady pour with tool-free installation.

€22.40 €30.32

Replacement Ripper Cap for 2.7 US Gal Tuff Jug Container — 2.7 US gal, Green

-€7.92

TUFF JUG Replacement Ripper Cap for 2.7 US Gal Tuff Jug Container — 2.7...

Replacement cap that delivers fast, low-drip fluid transfer and simple snap-on installation.

€22.40 €30.32

Replacement Ripper Cap for 5 US Gal Tuff Jug Container — 5 US gal, Green

-€7.92

TUFF JUG Replacement Ripper Cap for 5 US Gal Tuff Jug Container — 5 US...

Fast-flowing replacement cap for 5 US gal containers; reduces drips and enables quicker fluid transfer.

€22.40 €30.32

-€7.92

TUFF JUG Replacement Ripper Cap for 2.7 US Gal Tuff Jug Container — Black

Fast-flow Ripper Cap for 2.7 US gal Tuff Jug containers — quick pours and reduced spills.

€22.40 €30.32

Replacement Ripper Cap for 5 US Gal Tuff Jug Container — 5 US gal, black

-€7.92

TUFF JUG Replacement Ripper Cap for 5 US Gal Tuff Jug Container — 5 US...

Replacement cap for 5 US gal containers; fast-flowing fluid transfer and easy installation.

€22.40 €30.32

-€10.33

TUFF JUG Tuff Jug vs RipperCap 10L — Green

Fast, clean filling — 10 L capacity, easy handling and wide range of applications.

€29.19 €39.52

-€383.31

TECHNORESEARCH Centurion Super Pro Plus — Black kit

Advanced electrical system diagnostic tool; not for use with Android-based systems. Optional red USB key (PN# 1020-2868) required for Direct Link.

€1,490.65 €1,873.96

-€172.34

TECHNORESEARCH Complete Oxygen Sensor Installation Kit — O2 sensor, Black, Clear

Fast, all‑in‑one bung kit for O2 sampling and tuning; includes insertion tool, drill bit, sampler blocks, tubing, 25 rivnuts, screws and copper washers.

€669.24 €841.58

-€14.96

TECHNORESEARCH Bung Refill Kit — Silver, Yellow, for 3807-0378

Includes 25 each of bungs, plugs and copper washers. For use with 3807-0378 only.

€58.07 €73.03

-€20.91

BARNETT Clutch Spring Compression Tool — Black

Compresses diaphragm clutch springs for easy removal and reinstallation of retainer rings. Made in the USA.

€81.32 €102.23

-€11.50

BARNETT Clutch Spring Compression Tool — Black

Tool for removal and reinstallation of retainer rings on diaphragm clutches. Durable and compact for shop or home use. Made in the USA.

€44.69 €56.19

-€8.89
Out of Stock

QUAD LOGIC Polaris Carburetor Choke Nut Tool — Silver, Carburetor

Choke nut wrench for removing and installing choke cable fittings on Mikuni 34–40 mm carburetors. Ideal for quick Polaris carburetor repairs.

€25.11 €34.00

-€11.55

QUAD LOGIC Fuel Pump Nut Wrench for Polaris — Silver

Helps remove stuck fuel pump retainer nuts on Polaris models; reduces time and avoids damage.

€32.64 €44.19

Ball Joint Removal Tool for Strut Front Suspension — '90–'21 ATV/UTV fit, zinc

-€18.40

QUAD LOGIC Ball Joint Removal Tool for Strut Front Suspension — '90–'21...

Two-piece steel tool for removing and installing ball joints on strut-style front suspension. Works with standard shop presses; fits '90–'21 ATV/UTV models.

€52.01 €70.41

-€18.40
Out of Stock

QUAD LOGIC Ball Joint Removal Tool for A-Arm Front Suspension — Zinc

Two-piece steel tool for removing and installing ball joints with a standard shop press; heavy-duty construction; fits 2008-2020 A-arm front suspension ATVs/UTVs (except RZR/General 1000).

€52.01 €70.41

Ball Joint Removal Tool for A-Arm Front Suspension — A-Arm front suspension, zinc

-€18.40
Out of Stock

QUAD LOGIC Ball Joint Removal Tool for A-Arm Front Suspension — A-Arm...

Two-piece steel tool for removing and installing ball joints with a standard shop press; heavy-duty for home or professional shops. Fits '15–'22 ATV/UTV A-Arm front suspensions.

€52.01 €70.41

-€8.33
Out of Stock

QUAD LOGIC Plastic Rivet Pliers — Black, QUAD LOGIC

Removes plastic rivets cleanly without damaging the head.

Designed for quick, repeatable removal; fits RZR plastic rivets.

€23.53 €31.86

Tuff Jug Container with Ripper Cap — 10.2 L (2.7 US gal), White

-€10.33
Out of Stock

TUFF JUG Tuff Jug Container with Ripper Cap — 10.2 L (2.7 US gal), White

Prevents sliding and spills in truck beds. Fast-flow ripper cap and view strip for easy level checks.

€29.19 €39.52

-€3.79
Out of Stock

TUFF JUG Tuff Jug Standard Replacement Cap and Plug — 3/4" NPT, Black

Replacement cap and plug pre-drilled with 3/4" NPT; remove plug to install a flexible fast flow spout (sold separately). Not legal for sale or use in California.

€10.72 €14.51

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS